Writeup: custom Koni and Ground Control coilover setup assembly - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Black R · 11-19-2009, 09:02 AM

I'm looking to run something similar to this on my s13.

But I'd like to use the z32 aluminum uprights and q45 rear end, knuckles, etc.

The two caveats with this setup (IMO) are lack of separate lower perch adjustability, and the clunking issue due to unloading and reseating.

For Honda setups, ground control makes a decent extended tophat to prevent bottoming out the shocks. Is there not a similar Nissan application?

I guess I'll pm Richard to see if he can make those housings threaded with some height adjustment.

11-19-2009, 09:02 AM	#11
Black R Zilvia Addict Join Date: May 2009 Location: ATL Posts: 642 Trader Rating: (0) Feedback Score: 0 reviews	I'm looking to run something similar to this on my s13. But I'd like to use the z32 aluminum uprights and q45 rear end, knuckles, etc. The two caveats with this setup (IMO) are lack of separate lower perch adjustability, and the clunking issue due to unloading and reseating. For Honda setups, ground control makes a decent extended tophat to prevent bottoming out the shocks. Is there not a similar Nissan application? I guess I'll pm Richard to see if he can make those housings threaded with some height adjustment. Last edited by Black R; 11-21-2009 at 08:05 PM.. Reason: typo again