Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[slow40sx]

Originally Posted by Ronald_Mcdonald

What exactly is wrong with my fitment?

car looks high

[Mister.E]

tell me what you think is right about it...

[Ronald_Mcdonald]

I really don't think the pictures I posted do the car justice, because it's definitely low. It could go .5" lower, but like I said, my exhaust is already on the ground. I am going to get some hose clamps this week sometime and try to pull the hangers tighter to the body. Maybe that'll give me enough clearance for that .5" drop.

[deolio]

Originally Posted by Ronald_Mcdonald

Could go a little lower, as far as fitment is concerned, but my exhaust is literally about 3CM off the ground as is. Once my 17/18's get here, I'll have better clearance, and better fitment.

so tired of this excuse

deal with it

[Ronald_Mcdonald]

Mine already looks like that.

[SmokeCircle]

Originally Posted by Ronald_Mcdonald

Mine already looks like that.

i think you have a leaky injector...

[deolio]

Originally Posted by Ronald_Mcdonald

Mine already looks like that.

then what is there to loose?

[KoukiMonsta]

Originally Posted by silvia?

i think you have a leaky injector...

what?

Originally Posted by deolio

then what is there to loose?

some people are hardcore and some people are bitches their whole life...

rules
18x10 -17 ish(i forgot) was just a "test"
3* camber

[Ronald_Mcdonald]

Just to appease the Zilvians, I'll get the clamps tomorrow, and lower it some more.

Maybe I'll get an exhaust shop to rework my exhaust.

[KoukiMonsta]

Originally Posted by Ronald_Mcdonald

Just to appease the title of this thread, I'll get the clamps tomorrow, and lower it some more.

Maybe I'll get an exhaust shop to rework my exhaust.

---------------------

[deolio]

there's nothing like some zilvia peer pressure to get you to go lower

are there actually pic-per-post rules in this thread that i'm not aware of?





18x9.5 +12 215/35f 215/40r
stances w/ coallars removed
-1.8f -3.1r

[mikefc]

Raise your rear or get aero or something.
That shit is hideous.

[ka240zouki]

18x10+24 with 25mm's stacked on deck to make it -26 225/40 feddy's.

camber unknown, no alignment yet, car hasn't come off the driveway with the current setup.

[KoukiMonsta]

Originally Posted by mikefc

Raise your rear or get aero or something.
That shit is hideous.

i disagree

and to whoever asked no this is NOT the pics thread, this is wheel fitment no pics required. though we sure as hell like them

[deolio]

Originally Posted by mikefc

Raise your rear or get aero or something.
That shit is hideous.

over all, yes, i agree, but the one thing it does have is decent fitment. stances don't go low enough up front. at least with 215/35's on 18x9.5's...

Originally Posted by KoukiMonsta

i disagree

and to whoever asked no this is NOT the pics thread, this is wheel fitment no pics required. though we sure as hell like them

people always say "rules:" and post a pic so i was like wtf?

[hOngsterr]

seriously, this thread went to shit. (not talking about the low peeps and fitment etc.)

[GabeS14]

Originally Posted by mikefc

Raise your rear or get aero or something.
That shit is hideous.

raise you face or shut your mouth!!

Originally Posted by ka240zouki

18x10+24 with 25mm's stacked on deck to make it -26 225/40 feddy's.

camber unknown, no alignment yet, car hasn't come off the driveway with the current setup.

I hate stacked spacers, but that shit looks fucking beautifull!

[franklin93zx]

When is a mod going to clean up the last couple pages of BS not the pics but all the bitching

[Odysseus]

18x9.5 +15 Rota Grids cause Im scum of the Earth
215/35 Federal 595s front
215/40 Federal 595s rear

Stances with collars removed, unknown camber

[truebluegallo]

sick as shit dude wen u upgrade i want your grids

[ka240zouki]

Originally Posted by GabeS14

raise you face or shut your mouth!!



I hate stacked spacers, but that shit looks fucking beautifull!

thanks man.
i hate them too.. but i couldn't do more then $1,000 including tires to have something fit with my 50mm overs... so these wheels had to do.

hopefully have money for something a LOT better over fall/winter

[S13coupeRB25DET]

Originally Posted by Kouki_monstr

HA, get out of here lil kid

RULES

Hahahaha yur funny not. See those rims are sick

[PHAS3D]

Originally Posted by aznevoviii

clean coupe,
to me the wheels look like Work Meister s1's... i might be wrong...

They are definetly ssr's....I would like to think I know my own wheels...

[deolio]

Originally Posted by Odysseus

18x9.5 +15 Rota Grids cause Im scum of the Earth
215/35 Federal 595s front
215/40 Federal 595s rear

Stances with collars removed, unknown camber

Originally Posted by truebluegallo

sick as shit dude wen u upgrade i want your grids

hahaha bmx-f UNITE!

[rweezly_s13]

Originally Posted by Odysseus

18x9.5 +15 Rota Grids cause Im scum of the Earth
215/35 Federal 595s front
215/40 Federal 595s rear

Stances with collars removed, unknown camber

i think this is truly clean sir!

[comablack783]

Tire residue on your quarter = win.. nice..

[ka240zouki]

permanent tire shine =]

[nmssr08]

My Wheel fitment before I sold the car.

Wheels: Work Equips mirror polished lips/bolts with custom House of Kolor Graphite Black pearl center

Front Wheel Size: 18x9 +20 mid disk with 20mm spacers on extended lugs
Rear Wheel Size: 18x10 +10 mid disk with no spacer

Front tire: Falken ZX912 215/40R18
Rear Tire: Flaken ZX912 235/40R18

Front Camber: -2.5 degrees
Rear Camber: -3 degrees

Suspension set up was Tein HE coilovers, front tie rod/ends, front tension rods, RUCAS, rear toe arms.
Both front and rear fenders are pulled.....sorry don't know how much.

[sic240]

[/quote]

Hey, what type of hood vent is that?

[SoSideways]

Hey, FUCKING PM THE GUY!!!