1jz question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Night drifte89 · 09-25-2013, 03:32 PM

Well didn't realize that there was a difference between auto and manual flywheels.(new to this)... So is there anyway to use the auto flywheel in a manual tranny? I'm guessing that it isn't possible but I thought maybe someone might be able to tell me something. It's non vvti too btw

AZSCsideways · 09-25-2013, 04:12 PM

no...

autos have flexplates not flywheels

manuals have flywheels not flexplates

Night drifte89 · 09-25-2013, 04:17 PM

Ahh thanks.. (Again sorry new)..

So the manual ones are smaller in width right? Cause I got the right bolts but they weren't long enough

AZSCsideways · 09-25-2013, 04:27 PM

i think you need to search google a bit more. im not too sure what you are asking about them being small in with, if anything they are thicker where the flywheel bolts to the crank.

heres a pic of a flywheel for a 2jz (same flywheel as a 1j)

and flywheel bolts

Night drifte89 · 09-25-2013, 04:34 PM

See my flywheel is 2x the size of that and it's for a "1jz" I got the bolts from drift motion so ik they are the right size. But they are 36mm and I need atleast 55mm bolts to go though the holes on my flywheel

AZSCsideways · 09-25-2013, 04:51 PM

ive been building jz cars for quite some time and if your flywheel is 2x the side of that then you have the wrong flywheel. if you got the bolts from Arron (owner of DM) then you got the right ones. can you post a picture of your flywheel?

AZSCsideways · 09-25-2013, 04:51 PM

also where did you get the flywheel from?

Night drifte89 · 09-25-2013, 04:58 PM

ImageUploadedByTapatalk1380149783.012479.jpg

And I got it off eBay...

This is the bolt going into the flywheel

ImageUploadedByTapatalk1380149899.174241.jpg

AZSCsideways · 09-26-2013, 07:46 AM

im almost 100% sure thats a v160 flywheel and not an r154 flywheel. i probably should have asked if you were running an r154 or a v160 before.

a r154 is a 5speed trans out of a mk3 supra
a v160 is a 6speed trans out of a mk4 supra

Night drifte89 · 09-26-2013, 09:19 AM

That's probably why I paid a arm and a leg for it and why it won't work. So I found a r154 flywheel and he used it in his r154 so it will be the right one, guess ill sell it on eBay with the right na me on it

AZSCsideways · 09-26-2013, 09:21 AM

make sure its a jz to r154 flywheel and not a 7m to r154 flywheel

Night drifte89 · 09-26-2013, 09:40 AM

Idk if you can tell by a picture

ImageUploadedByTapatalk1380210015.687978.jpg

di-devol · 09-26-2013, 09:48 AM

7m flywheel for R154 has a different bolt pattern. That's a Getrag.

Night drifte89 · 09-26-2013, 09:53 AM

So it won't work?

AZSCsideways · 09-26-2013, 11:56 AM

the last one you posted looks to be right, i believe hes talking about the other one you posted before. also yes the 7m has a 6 bolt pattern and the JZ flywheels have a 8 bolt pattern

all JZ flywheels and flexplates have the same bolt pattern where it bolts to the crank

Night drifte89 · 09-26-2013, 12:00 PM

Sweet so what do the v160 flywheels go for?

09-25-2013, 03:32 PM	#1
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	1jz question Well didn't realize that there was a difference between auto and manual flywheels.(new to this)... So is there anyway to use the auto flywheel in a manual tranny? I'm guessing that it isn't possible but I thought maybe someone might be able to tell me something. It's non vvti too btw

09-25-2013, 04:12 PM	#2
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	no... autos have flexplates not flywheels manuals have flywheels not flexplates __________________ Admin- AZSupraCentral

09-25-2013, 04:27 PM	#4
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	i think you need to search google a bit more. im not too sure what you are asking about them being small in with, if anything they are thicker where the flywheel bolts to the crank. heres a pic of a flywheel for a 2jz (same flywheel as a 1j) and flywheel bolts __________________ Admin- AZSupraCentral

09-25-2013, 04:51 PM	#6
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	ive been building jz cars for quite some time and if your flywheel is 2x the side of that then you have the wrong flywheel. if you got the bolts from Arron (owner of DM) then you got the right ones. can you post a picture of your flywheel? __________________ Admin- AZSupraCentral

09-25-2013, 04:51 PM	#7
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	also where did you get the flywheel from? __________________ Admin- AZSupraCentral

09-25-2013, 04:17 PM	#3
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	Ahh thanks.. (Again sorry new).. So the manual ones are smaller in width right? Cause I got the right bolts but they weren't long enough

09-25-2013, 04:34 PM	#5
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	See my flywheel is 2x the size of that and it's for a "1jz" I got the bolts from drift motion so ik they are the right size. But they are 36mm and I need atleast 55mm bolts to go though the holes on my flywheel

09-25-2013, 04:58 PM	#8
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	ImageUploadedByTapatalk1380149783.012479.jpg And I got it off eBay... This is the bolt going into the flywheel ImageUploadedByTapatalk1380149899.174241.jpg

09-26-2013, 07:46 AM	#9
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	im almost 100% sure thats a v160 flywheel and not an r154 flywheel. i probably should have asked if you were running an r154 or a v160 before. a r154 is a 5speed trans out of a mk3 supra a v160 is a 6speed trans out of a mk4 supra __________________ Admin- AZSupraCentral

09-26-2013, 09:19 AM	#10
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	That's probably why I paid a arm and a leg for it and why it won't work. So I found a r154 flywheel and he used it in his r154 so it will be the right one, guess ill sell it on eBay with the right na me on it

09-26-2013, 09:21 AM	#11
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	make sure its a jz to r154 flywheel and not a 7m to r154 flywheel __________________ Admin- AZSupraCentral

09-26-2013, 09:40 AM	#12
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	Idk if you can tell by a picture ImageUploadedByTapatalk1380210015.687978.jpg

09-26-2013, 09:48 AM	#13
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 42 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	7m flywheel for R154 has a different bolt pattern. That's a Getrag. __________________

09-26-2013, 09:53 AM	#14
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	So it won't work?

09-26-2013, 11:56 AM	#15
AZSCsideways Leaky Injector Join Date: Jan 2012 Location: Tempe AZ Age: 34 Posts: 146 Trader Rating: (1) Feedback Score: 1 reviews	the last one you posted looks to be right, i believe hes talking about the other one you posted before. also yes the 7m has a 6 bolt pattern and the JZ flywheels have a 8 bolt pattern all JZ flywheels and flexplates have the same bolt pattern where it bolts to the crank __________________ Admin- AZSupraCentral

09-26-2013, 12:00 PM	#16
Night drifte89 Zilvia Junkie Join Date: Sep 2013 Location: Wadena Minnesota Posts: 388 Trader Rating: (0) Feedback Score: 0 reviews	Sweet so what do the v160 flywheels go for?