The "Identify this" thread - Page 115 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

***S14DB*** · 08-21-2008, 02:52 PM

Consult Plug.

Somnambulist · 08-21-2008, 08:14 PM

What kind of seat is this?

They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

timlush · 08-21-2008, 08:23 PM

What skirts are these?

DaPCWiz · 08-21-2008, 08:32 PM

Quote:

Originally Posted by Somnambulist

What kind of seat is this?

They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

looks like s15 to me.. but I could be wrong?

Somnambulist · 08-21-2008, 08:54 PM

Quote:

Originally Posted by DaPCWiz

looks like s15 to me.. but I could be wrong?

Googled S15 Silvia seats and this is what I found...

They look slightly different.

The red/black ones have a weird flare at the top near the headrest, while the S15 seats don't. Also looks like they have much more side support than the S15s.

ProjNightshade · 08-22-2008, 05:50 AM

Quote:

Originally Posted by timlush

What skirts are these?

vertex or vertex knock off. I'm not sure if it was real or not. The owner of the car was on here, so you could try asking him also.

dirtdiggler666 · 08-23-2008, 01:09 PM

ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

**mrmephistopheles** · 08-23-2008, 02:08 PM

Quote:

Originally Posted by dirtdiggler666

ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

It's probably the Super Multiple Junction.

***S14DB*** · 08-23-2008, 04:24 PM

Quote:

Originally Posted by mrmephistopheles

It's probably the Super Multiple Junction.

I would say TCU cause it is long and looks like a mini ECU(blue). SMJ is closer to square.

dirtdiggler666 · 08-23-2008, 06:19 PM

ya the plug is blue but if i remember correct the box is silver

ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob??

if no one can figure it out i will take pics

***S14DB*** · 08-23-2008, 07:12 PM

Quote:

Originally Posted by dirtdiggler666

ya the plug is blue but if i remember correct the box is silver

ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob??

if no one can figure it out i will take pics

Silver Box hooked up to the blue plug w/Bolt is the TCU.

Black Connector with grey cam lock is the Door/Window/Lights controls. "Smart Entrance Control Unit"

Also the fuse box is down there too...

dirtdiggler666 · 08-24-2008, 05:30 PM

so the tcu has nothing to do with my headlights ect

what is the tcu for?

thanks so much for all the help

devonkyle77 · 08-24-2008, 11:34 PM

where does that pipe go? i am LOST!

thanks in advance!

***S14DB*** · 08-25-2008, 12:17 AM

Quote:

Originally Posted by dirtdiggler666

so the tcu has nothing to do with my headlights ect

what is the tcu for?

thanks so much for all the help

TCU = Transmission Control Unit. For your auto tranny.

Quote:

Originally Posted by devonkyle77

where does that pipe go? i am LOST!

thanks in advance!

Recirc pipe for the BOV.

devonkyle77 · 08-25-2008, 07:49 AM

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

lflkajfj12123 · 08-25-2008, 02:52 PM

nitekids aero?

Gavster · 08-25-2008, 04:07 PM

I believe its called "friends" aero, or something like that

axiomatik · 08-25-2008, 06:45 PM

that's what i remembered too:

http://zilvia.net/f/chat/131248-friends-aero.html

lflkajfj12123 · 08-25-2008, 08:59 PM

so which VS copy is it

atom · 08-25-2008, 10:19 PM

VS don't make a copy, thank god.

lflkajfj12123 · 08-25-2008, 10:38 PM

thats sad

aero is amazing right up there with j-blood

derek_s13 · 08-26-2008, 12:16 AM

Quote:

Originally Posted by devonkyle77

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

there's a small pipe branching off the coldpipe that fits directly into it.

most aftermarket coldpipes have em on there too.

vindiezel · 08-26-2008, 01:37 AM

Is this a compressor outlet pipe for the S15 turbo? The problem is that the Greddy compressor outlet pipe does not fit. I am assuming it is an for an S15 turbo, but I just need confirmation.. What do you guys think?

Bought this S13 SR20 Redtop from a forum member.. it was an S15 turbo set-up.. then the S15 turbo was parted out and I was given the stock S13 turbo.

-pretty sure the exhaust manifold is Megan.
-Stock T25 turbo bolts up fine, the turbo has not been clocked.
-the person I bought the motor from does not know for certain if it is an S13 or S15 compressor outlet pipe.. I do not have a stock pipe for reference.

First pic shows why it doesn't fit. Second pic shows the only way it fits. If I point it in the opposite direction towards the front, it'll hit the vacuum fitting on the wastegate actuator. TIA!

Ninjabread · 08-26-2008, 10:04 AM

Greddy compressor outlet is meant for people who have a t28 that want to retain stock s13 sr intercooler piping. You're gonna need a stock t25 outlet which is straight (no bend).

socal_kouki · 08-26-2008, 10:44 AM

Quote:

Originally Posted by s0apgun

nitekids aero?

Vanquish GT Front Bumper
Feiz Designs front fender
Masa Motorsports M-tune fender add on
Feiz Designs Side skirts
Aero Palace Rear fender
Msport Vented Carbon Fiber hood

Copied it off his cardomain site.

socal_kouki · 08-26-2008, 10:46 AM

Quote:

Originally Posted by vindiezel

Is this a compressor outlet pipe for the S15 turbo? The problem is that the Greddy compressor outlet pipe does not fit. I am assuming it is an for an S15 turbo, but I just need confirmation.. What do you guys think?

Bought this S13 SR20 Redtop from a forum member.. it was an S15 turbo set-up.. then the S15 turbo was parted out and I was given the stock S13 turbo.

-pretty sure the exhaust manifold is Megan.
-Stock T25 turbo bolts up fine, the turbo has not been clocked.
-the person I bought the motor from does not know for certain if it is an S13 or S15 compressor outlet pipe.. I do not have a stock pipe for reference.

First pic shows why it doesn't fit. Second pic shows the only way it fits. If I point it in the opposite direction towards the front, it'll hit the vacuum fitting on the wastegate actuator. TIA!

You're going to have to have a shop turn your turbo housing a few degrees... make that more than a few degrees.

vindiezel · 08-26-2008, 12:25 PM

The Greddy outlet came with the setup.. If I have the turbo clocked, the wastegate actuator will be out of alignment.. unless there is something I'm missing. Looks like I'll be looking for a stock compressor outlet pipe. Thanks guys!

***S14DB*** · 08-26-2008, 05:24 PM

Quote:

Originally Posted by devonkyle77

thanks man, where does the end go that i have the arrow pointed to though?
i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first!

The recirc port on the BOV. port for the BOV will be on the cold pipe there.

monk · 08-29-2008, 04:07 AM

what kind of headlights are these on koguchi's car??

-***JOKER***- · 08-29-2008, 04:12 AM

dude those are the supermade ones with a lexan cover on it...the lexan cover which he uses is tinted thats why it looks black...nothing special

08-21-2008, 02:52 PM	#3421
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	Consult Plug. __________________ Comments should be taken as Opinions not as Statements of Fact

08-24-2008, 11:34 PM	#3433
devonkyle77 Post Whore! Join Date: Sep 2003 Location: md Age: 40 Posts: 3,091 Trader Rating: (3) Rides Gallery: devonkyle77 Feedback Score: 3 reviews	where does that pipe go? i am LOST! thanks in advance! __________________ WTB-NARDI wheel & NRG 2.8 QR

08-25-2008, 07:49 AM	#3435
devonkyle77 Post Whore! Join Date: Sep 2003 Location: md Age: 40 Posts: 3,091 Trader Rating: (3) Rides Gallery: devonkyle77 Feedback Score: 3 reviews	thanks man, where does the end go that i have the arrow pointed to though? i will have a fmic in my bay in the next few days, and my bay will be practically complete, and i would like to know what to do with that pipe first! __________________ WTB-NARDI wheel & NRG 2.8 QR

08-25-2008, 04:07 PM	#3437
Gavster Zilvia Junkie Join Date: Mar 2005 Location: Charleston, SC Age: 38 Posts: 512 Trader Rating: (4) Feedback Score: 4 reviews	I believe its called "friends" aero, or something like that __________________ I <3 burnt metal smell....

08-25-2008, 06:45 PM	#3438
axiomatik Post Whore! Join Date: Dec 2003 Location: ATL Posts: 4,697 Trader Rating: (0) Feedback Score: 0 reviews	that's what i remembered too: http://zilvia.net/f/chat/131248-friends-aero.html __________________

08-21-2008, 08:14 PM	#3422
Somnambulist Zilvia Junkie Join Date: Jan 2008 Location: Cincinnati, Ohio Posts: 596 Trader Rating: (5) Feedback Score: 5 reviews	What kind of seat is this? They Almost fit S14 - one bolt hole on seat rail is 1/2" off.

08-21-2008, 08:23 PM	#3423
timlush Zilvia FREAK! Join Date: Aug 2005 Location: Louisville, KY Age: 39 Posts: 1,169 Trader Rating: (12) Feedback Score: 12 reviews	What skirts are these?

08-23-2008, 01:09 PM	#3427
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	ok this one can be hard with no pic but for s14 drivers side its a blue plug with a bolt in the middle of it, it look like a mini ecu plug. just wanted to know what its for??

08-23-2008, 06:19 PM	#3430
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	ya the plug is blue but if i remember correct the box is silver ok here is the deal i took out the box to do some work and i fukin lost it, well i plugged everything back in and now my headlights brake light ect dont work but the car cranks?? so i wanna know if the little box is the prob?? if no one can figure it out i will take pics

08-24-2008, 05:30 PM	#3432
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	so the tcu has nothing to do with my headlights ect what is the tcu for? thanks so much for all the help

08-25-2008, 02:52 PM	#3436
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	nitekids aero?

08-25-2008, 08:59 PM	#3439
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	so which VS copy is it

08-25-2008, 10:19 PM	#3440
atom Zilvia FREAK! Join Date: Jan 2003 Location: San Francisco Posts: 1,196 Trader Rating: (0) Feedback Score: 0 reviews	VS don't make a copy, thank god.

08-25-2008, 10:38 PM	#3441
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,483 Trader Rating: (20) Feedback Score: 20 reviews	thats sad aero is amazing right up there with j-blood

08-26-2008, 10:04 AM	#3444
Ninjabread Post Whore! Join Date: Jul 2005 Location: Ottawa, Ontario Age: 34 Posts: 3,492 Trader Rating: (2) Rides Gallery: Ninjabread Feedback Score: 2 reviews	Greddy compressor outlet is meant for people who have a t28 that want to retain stock s13 sr intercooler piping. You're gonna need a stock t25 outlet which is straight (no bend). __________________ 613DriftWerks.ca

08-26-2008, 12:25 PM	#3447
vindiezel Leaky Injector Join Date: Jan 2004 Location: San Diego Age: 39 Posts: 60 Trader Rating: (5) Feedback Score: 5 reviews	The Greddy outlet came with the setup.. If I have the turbo clocked, the wastegate actuator will be out of alignment.. unless there is something I'm missing. Looks like I'll be looking for a stock compressor outlet pipe. Thanks guys!

08-29-2008, 04:07 AM	#3449
monk Leaky Injector Join Date: Feb 2003 Location: Los Angeles Age: 38 Posts: 116 Trader Rating: (3) Feedback Score: 3 reviews	what kind of headlights are these on koguchi's car??

08-29-2008, 04:12 AM	#3450
-*JOKER*- Leaky Injector Join Date: Jun 2008 Location: petrol station Age: 40 Posts: 100 Trader Rating: (0) Feedback Score: 0 reviews	dude those are the supermade ones with a lexan cover on it...the lexan cover which he uses is tinted thats why it looks black...nothing special