ka24 injector help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

07sitos13 · 06-21-2012, 02:12 PM

yes ive searched and dont know what else to do... most threads is about the the #3 injector but my #1 cylinder keeps going dead. ive replaced the injector with a used one and it worked for about a week but it ended up not working again so i replaced it with a brand new injector and it still doesnt work. i know its not a spark problem because ive replaced the plug, wires, cap, and rotor, tested it and it has great spark but you can pull the injector plug and the idle doesnt change. unplug any of the others and the idle changes..... its a brand new injector, could it be the wiring or what?

also i havent checked the ohms on the plug yet. should do it tonight i hope. and the only other ecu i have is a rb25 so i cant test another one right now..... also havent checked for any codes yet. will do asap. any help would be awsome though!

mr2gons14 · 06-21-2012, 02:35 PM

well if u pull the plug from the injector and the idle doesnt change that means its problem with the wiring or connector. Test the wires that are going to the injector make sure its getting a signal. If it is try getting some electrical parts cleaner and spray the connector to make sure its not just nasty and gunked up

ka4life87 · 06-21-2012, 03:46 PM

On the injector connector, check with meter one wire should be switched 12 volts and the ground the computer triggers, check that corresponding ground to ecu make sure there is no short in between or bad ground, ground or voltage spikes can overheat injector coil or damage ecu

07sitos13 · 06-21-2012, 04:02 PM

ill check the voltage later tonight and see whats goin on. thanks for the input.

Butcher240sx · 06-25-2012, 08:14 PM

Possibly the injector driver going out in the ecu. Check all your grounds.

06-21-2012, 02:35 PM	#2
mr2gons14 Zilvia Addict Join Date: Jun 2011 Location: Phoenix, AZ Age: 33 Posts: 639 Trader Rating: (7) Feedback Score: 7 reviews	well if u pull the plug from the injector and the idle doesnt change that means its problem with the wiring or connector. Test the wires that are going to the injector make sure its getting a signal. If it is try getting some electrical parts cleaner and spray the connector to make sure its not just nasty and gunked up __________________ zilvia.net/f/cars-sale/517359-95-240sx-sr20-swap-uras-greddy-apexi-ect.html

06-25-2012, 08:14 PM	#5
Butcher240sx Zilvia Member Join Date: Oct 2010 Location: Houston Texas Age: 42 Posts: 157 Trader Rating: (0) Feedback Score: 0 reviews	Possibly the injector driver going out in the ecu. Check all your grounds. __________________ Don't Mess With Texas

06-21-2012, 02:12 PM	#1
07sitos13 Join Date: Jun 2012 Location: sumter sc Age: 36 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	ka24 injector help! yes ive searched and dont know what else to do... most threads is about the the #3 injector but my #1 cylinder keeps going dead. ive replaced the injector with a used one and it worked for about a week but it ended up not working again so i replaced it with a brand new injector and it still doesnt work. i know its not a spark problem because ive replaced the plug, wires, cap, and rotor, tested it and it has great spark but you can pull the injector plug and the idle doesnt change. unplug any of the others and the idle changes..... its a brand new injector, could it be the wiring or what? also i havent checked the ohms on the plug yet. should do it tonight i hope. and the only other ecu i have is a rb25 so i cant test another one right now..... also havent checked for any codes yet. will do asap. any help would be awsome though!

06-21-2012, 03:46 PM	#3
ka4life87 Leaky Injector Join Date: Jun 2012 Location: casa grande Posts: 104 Trader Rating: (0) Feedback Score: 0 reviews	On the injector connector, check with meter one wire should be switched 12 volts and the ground the computer triggers, check that corresponding ground to ecu make sure there is no short in between or bad ground, ground or voltage spikes can overheat injector coil or damage ecu

06-21-2012, 04:02 PM	#4
07sitos13 Join Date: Jun 2012 Location: sumter sc Age: 36 Posts: 17 Trader Rating: (0) Feedback Score: 0 reviews	ill check the voltage later tonight and see whats goin on. thanks for the input.