This is the interior thread - Page 249 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nujabe · 04-13-2014, 04:53 PM

is there any way to take off the s14 gauge face plate to swap it on to another cluster. my rpm is dead on my se and i just wanted to swap it over to but i dont know if the needle will pop off i dont want to force it.

Konster · 04-13-2014, 05:08 PM

Quote:

Originally Posted by Broadfield

Hydro dipping my friend! I'm thinking about maybe getting into it to offer customers.

That is something I might be interested in Sir.

az_240 · 04-14-2014, 01:34 AM

Quote:

Originally Posted by nujabe

is there any way to take off the s14 gauge face plate to swap it on to another cluster. my rpm is dead on my se and i just wanted to swap it over to but i dont know if the needle will pop off i dont want to force it.

I had the tach die in my kouki a while back. I just swapped tachs... they are interchangeable and it's not that hard to pop the needle off.

meoww · 04-14-2014, 06:58 AM

Quote:

Originally Posted by BossHogg

haha, i think i like it lol. Needs a hula skirt girl on dash, drink with umbrella and sand on the floor board.

is the cup holder tray thing sturdy? whats it called and where did you buy it?

TheRealSy90 · 04-14-2014, 06:47 PM

He made it.

_kouki_monster_ · 04-14-2014, 08:45 PM

Its probably one made for a vip car. Pretty common on Lexus cars.

zooopreme · 04-14-2014, 09:15 PM

Quote:

Originally Posted by _kouki_monster_

Its probably one made for a vip car. Pretty common on VIP/Bippu cars.

Fixed. Junction Produce and VipdOut are one of the more common ones.

Lol, dude said "he made it"

Bullitt_180sx · 04-14-2014, 09:26 PM

Quote:

Originally Posted by zooopreme

Fixed. Junction Produce and VipdOut are one of the more common ones.

Lol, dude said "he made it"

That's what it said in the original post....

zooopreme · 04-14-2014, 09:40 PM

Quote:

Originally Posted by Bullitt_180sx

That's what it said in the original post....

Well, this flew over my head quite a bit lol

I saw only hand carved tiki knob

meoww · 04-14-2014, 10:06 PM

Quote:

Originally Posted by jaaanrel

what kind of brides are those?

these seats are amazing

Sstrappjr · 04-14-2014, 10:24 PM

My creation I made here in Japan land.

<br>

FriknAndre · 04-15-2014, 12:01 AM

Quote:

Originally Posted by ms!3

am i the only one that hates dildo/bubble knobs?

pretty sure, at least aluminum or something.

your not alone on that shift knob part hahah

FriknAndre · 04-15-2014, 12:17 AM

Quote:

Originally Posted by Bullet01

Mines

What AC system is that? it looks nice!

Bullitt_180sx · 04-15-2014, 05:18 AM

Quote:

Originally Posted by FriknAndre

What AC system is that? it looks nice!

Uh...what?

It's the S13 digital climate control. We didn't get it here in the states.

SR Skid_Kid · 04-17-2014, 11:18 PM

Quote:

Originally Posted by meoww

is the cup holder tray thing sturdy? whats it called and where did you buy it?

its pretty sturdy and holds LARGE drinkS with no problems what so ever... it also has a non slip pad which is great for holding your phone/ PSP/ ipod/ ect... i think i made a thread on how i made it on here or i think on NICO a long while back. also my glove box opens and closes easily.

conrad_s13.5 · 04-18-2014, 09:00 AM

I digg the dragonball shifter Strapjr...lol

a smaller one might be more 'functional' and still get the point acrossed tho

Something about shifting a grapefruit would feel weird to me

pulsar · 04-18-2014, 10:26 AM

After reading the entire 249 page thread from start to finish (while at work) I have to say there are some pretty nice interiors and the gas to the gauge in the car debate was absolutely hilarious. However Broadfield I was wondering if that SEM Chipguard could be used on the dashboard itself to redo them if they have cracks already? The cracks would have to be filled with slicone or another smoothing agent I would think, but is that material flexible?

Broadfield · 04-19-2014, 08:17 PM

Quote:

Originally Posted by pulsar

After reading the entire 249 page thread from start to finish (while at work) I have to say there are some pretty nice interiors and the gas to the gauge in the car debate was absolutely hilarious. However Broadfield I was wondering if that SEM Chipguard could be used on the dashboard itself to redo them if they have cracks already? The cracks would have to be filled with slicone or another smoothing agent I would think, but is that material flexible?

Yep, you would be just fine!

Broadfield · 04-20-2014, 01:47 PM

G35 cluster with Speedhut gauges:

S14 radio trim with Speedhut wideband:

S13 cluster with RaceTech gauges:

Karstondh · 04-20-2014, 01:49 PM

That's some mighty fine work.

Mister.E · 04-21-2014, 06:56 PM

Toby, SpeedHut doesnt offer any system like the Defi Link to cut down on some of the wiring mess do they? I looked on their website but couldnt find anything.

Broadfield · 04-21-2014, 08:44 PM

Quote:

Originally Posted by Dook-E

Toby, SpeedHut doesnt offer any system like the Defi Link to cut down on some of the wiring mess do they? I looked on their website but couldnt find anything.

Actually, all of their gauges are "kind of" like that. Each gauge will have three pigtails coming off of it. One plug is for the sensor harness. The second plug is for the power/ground connections and the third plug is for the dimmer controller. When you buy a set of four gauges or more, Speedhut will include a Y-harness for the power connections and a Y-harness for the dimmer connections. Each Y will have enough ports for all of the gauges. So you are only tapping the power/ground connections once into the Y, then it will have enough plugs to plug into all of the gauges... same with the dimmer controller. You tap the signal for the dimmer controller from your parking light wire and then it just Y's off with plugs to each gauge. This is the power/ground Y connector for example:

InsTanCeZ · 04-23-2014, 08:02 AM

Sent from my SPH-L710 using Tapatalk

5280VertDET · 04-23-2014, 08:50 AM

Quote:

Originally Posted by InsTanCeZ

Sent from my SPH-L710 using Tapatalk

FTFY

Sweet detail!!

InsTanCeZ · 04-23-2014, 09:00 AM

Yeah sorry. Phone wouldn't let me post it for some reason.

Sent from my SPH-L710 using Tapatalk

the-rusty-240 · 04-23-2014, 09:25 AM

Jeeez that is nice! How did you get it so tight?

OBEEWON · 04-23-2014, 10:34 AM

Quote:

Originally Posted by 5280vertdet

ftfy

sweet detail!!

how in the hell!!!!

tricky_ab · 04-23-2014, 11:58 AM

Quote:

Originally Posted by 5280VertDET

FTFY

Sweet detail!!

InsTanCeZ...

TMW · 04-23-2014, 12:51 PM

instancez is that your car?

TheRealSy90 · 04-23-2014, 06:57 PM

How even the hell did you do that and still weld the bar in?

04-13-2014, 04:53 PM	#7441
nujabe Zilvia Addict Join Date: Oct 2010 Location: BAY AREA CA Posts: 890 Trader Rating: (9) Feedback Score: 9 reviews	is there any way to take off the s14 gauge face plate to swap it on to another cluster. my rpm is dead on my se and i just wanted to swap it over to but i dont know if the needle will pop off i dont want to force it. __________________ Some black guy who lurks zilvia.

04-18-2014, 09:00 AM	#7456
conrad_s13.5 Zilvia FREAK! Join Date: Jan 2009 Location: STL Age: 36 Posts: 1,533 Trader Rating: (6) Feedback Score: 6 reviews	I digg the dragonball shifter Strapjr...lol a smaller one might be more 'functional' and still get the point acrossed tho Something about shifting a grapefruit would feel weird to me __________________ cONtRol FReAkS

04-20-2014, 01:47 PM	#7459
Broadfield Zilvia.net Advertiser Join Date: Oct 2006 Location: Normal, IL Age: 50 Posts: 2,946 Trader Rating: (163) Feedback Score: 163 reviews	G35 cluster with Speedhut gauges: S14 radio trim with Speedhut wideband: S13 cluster with RaceTech gauges: __________________ Follow Along For My Latest Work My Portfolio Please Share Check Out My Builds

04-23-2014, 08:02 AM	#7463
InsTanCeZ Zilvia Addict Join Date: Feb 2012 Location: Queen City Age: 31 Posts: 722 Trader Rating: (0) Feedback Score: 0 reviews	Sent from my SPH-L710 using Tapatalk __________________ *ACE マジック HEART*

04-23-2014, 09:00 AM	#7465
InsTanCeZ Zilvia Addict Join Date: Feb 2012 Location: Queen City Age: 31 Posts: 722 Trader Rating: (0) Feedback Score: 0 reviews	Yeah sorry. Phone wouldn't let me post it for some reason. Sent from my SPH-L710 using Tapatalk __________________ *ACE マジック HEART*

04-14-2014, 08:45 PM	#7446
_kouki_monster_ Leaky Injector Join Date: Oct 2011 Location: Indiana Age: 36 Posts: 80 Trader Rating: (0) Feedback Score: 0 reviews	Its probably one made for a vip car. Pretty common on Lexus cars.

04-14-2014, 10:24 PM	#7451
Sstrappjr Join Date: Feb 2013 Location: Fussa Japan Age: 33 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	My creation I made here in Japan land. <br>

04-18-2014, 10:26 AM	#7457
pulsar Join Date: Aug 2005 Location: Kingston NY Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	After reading the entire 249 page thread from start to finish (while at work) I have to say there are some pretty nice interiors and the gas to the gauge in the car debate was absolutely hilarious. However Broadfield I was wondering if that SEM Chipguard could be used on the dashboard itself to redo them if they have cracks already? The cracks would have to be filled with slicone or another smoothing agent I would think, but is that material flexible?

04-20-2014, 01:49 PM	#7460
Karstondh Join Date: Sep 2013 Location: Pendleton, Oregon Age: 34 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	That's some mighty fine work.

04-21-2014, 06:56 PM	#7461
Mister.E Post Whore! Join Date: Oct 2007 Location: Las Vegas Age: 39 Posts: 4,590 Trader Rating: (53) Feedback Score: 53 reviews	Toby, SpeedHut doesnt offer any system like the Defi Link to cut down on some of the wiring mess do they? I looked on their website but couldnt find anything.

04-23-2014, 09:25 AM	#7466
the-rusty-240 Leaky Injector Join Date: Nov 2013 Location: MN Posts: 140 Trader Rating: (1) Feedback Score: 1 reviews	Jeeez that is nice! How did you get it so tight?

04-23-2014, 12:51 PM	#7469
TMW Zilvia FREAK! Join Date: Apr 2011 Location: next level Posts: 1,207 Trader Rating: (6) Feedback Score: 6 reviews	instancez is that your car? __________________ @tannermwilson