Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!* - Page 158 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*fliprayzin240sx* · 05-23-2009, 07:46 PM

Quote:

Originally Posted by JoHn E

i need some help with wiring harness relocation

is this gonna be a problem?

the tires only slightly touch the wires but its only when my steering wheel is turned ALL the way to the left

NO, dont listen to anybody in here, leave the harness where it's at. The tires are keeping it clean by gently scrubbing road debris off it.

mbmbmb23 · 05-23-2009, 10:06 PM

Quick question on fitment, i have a set of Weds 3 peice wheels (similar to VS-XX face).....Supra firment 16x9.5 +44 and 16x10.5 +44 ....any hope of fitting on my S13 hatch? I have +25 bolt on spacers up front as well and rolled (not pulled) fenders in back.

thanks!

dub40sx · 05-23-2009, 10:14 PM

that isnt even a question. You basically just told us what you have.
If you are wondering how they will fit... very poorly unless you are running like 0 camber.

18x9.5 +17 225/40/18 bfg gforce
18x10.5 +17 255/35/18 bfg gforce

I want different tires cause these ones are tarded. also needa get some 15-20mm spacers for the front so I stop rubbing my coils. gonna match up the rears with some spacers too so I have an excuse to run more than -1 degree of camber.

95KA-Turbo · 05-23-2009, 11:19 PM

Quote:

Originally Posted by 95KA-Turbo

Lowered the front of the car more...and the rear actually since I last posted pictures in here.

My hood is off because I was taking pictures of my freshly painted valve cover.

Two different types of shots, haha.

17X10 +7 245/40/17
17X11 +12 255/40/17

[IMG]http://i25.photobucket.com/albums/c51/95KA-Turbo/valvecover1.jpg[/IG]

[IM]http://i25.photobucket.com/albums/c51/95KA-Turbo/valvecoverpan.jpg[/IMG]

The car is dirty as fuck, I just washed it and am redoing a shoot this weekend.

Here's a clean picture...it looks way higher because I'm on sunken ass gravel compared to grass.

SlideAlliance · 05-23-2009, 11:46 PM

Quote:

Originally Posted by dub40sx

18x9.5 +17 225/40/18 bfg gforce
18x10.5 +17 255/35/18 bfg gforce

Are you the guy who bought the MAE's from Erich???

nznew · 05-24-2009, 03:44 AM

17x9.5 -10 225 45 -3.5 degrees camber
18x12 -1 275 35 -3camber
25dmax fronts 30mm dmax rears

*fliprayzin240sx* · 05-24-2009, 05:23 AM

Quote:

Originally Posted by mbmbmb23

Quick question on fitment, i have a set of Weds 3 peice wheels (similar to VS-XX face).....Supra firment 16x9.5 +44 and 16x10.5 +44 ....any hope of fitting on my S13 hatch? I have +25 bolt on spacers up front as well and rolled (not pulled) fenders in back.

thanks!

+44 with 25mm, so thats about 9.5 +19 up front, depending on what suspension/coilover and how low you are, it should clear the front. Rears should be good to go with the spacers.

dub40sx · 05-24-2009, 03:38 PM

Quote:

Originally Posted by SlideAlliance

Are you the guy who bought the MAE's from Erich???

yeah, and im lovin um.

gt2871r · 05-24-2009, 09:56 PM

can someone help me figure out what gullflames i will need to fit my set up. s13 240, 20mm fronts, 30mm rears. i was thinking 17's in front, 18's in back. what offsets would be best? thank you. here is a site to what offsets the gullflames come in. any help would be appreciated:

GP Sports Gravity Gullflame

Z33dori · 05-24-2009, 10:08 PM

the lowest one possible

then stack a 15mm spacer

gt2871r · 05-24-2009, 10:11 PM

so 17x9.5 +26 in the front
and 18x9.5 +15 in the rear
will fit 20mm front fenders and 30mm rear fenders?

*revat619* · 05-24-2009, 10:18 PM

Quote:

Originally Posted by gt2871r

so 17x9.5 +26 in the front
and 18x9.5 +15 in the rear
will fit 20mm front fenders and 30mm rear fenders?

This is why you buy wheels first and then make them fit accordingly. Wide fenders are totally unnecessary for those sizes. But i digress...

I'd run 20mm or 25mm spacers all around with that set up...depending on how much camber you want to run.

newborn240 · 05-24-2009, 10:31 PM

Quote:

Originally Posted by Ian

17x9.5 +15 (30 some mm's of spacers)
Bmagic front fender
-4ish camber

more pics pls

RPS13-604 · 05-24-2009, 11:12 PM

Work meister s1 3pc 18x9.5 -3 on a 20mm front fender and a 18x11.5 -22 on a 50mm. i know it needs more low im getting the inner lip cut off on tuesday then im gonna slam it all the way down

gottdeskrieges · 05-24-2009, 11:17 PM

Need help with tire fitment on rims on a s13 hatch.

18x8.5 +35 F and 18x10.5 +35 R

widest tire i can put on rear with roll/shave.
Spacers needed? I have z32 f/r calipers, tanabe coils as well.

cxlumpy · 05-24-2009, 11:33 PM

Quote:

Originally Posted by gottdeskrieges

Need help with tire fitment on rims on a s13 hatch.

18x8.5 +35 F and 18x10.5 +35 R

widest tire i can put on rear with roll/shave.
Spacers needed? I have z32 f/r calipers, tanabe coils as well.

search through out this thread...

blitzsti22 · 05-25-2009, 02:59 AM

Quote:

Originally Posted by CamryOnBronze

Finally have the car done to post pics... this might not be enough strecth for this thread, but should be okay in the flush department...

17x9 +12 Rays Gram Lights 57Maximum
225/45/17 front 245/40/17 rears

I think I need to be a smidge lower...

i got the same wheels but mine at 18*9.5 all around 12 offset before coilovers ill try and get better pics tmr morning

wh0aitznic0 · 05-25-2009, 06:07 PM

JDMslide180 · 05-25-2009, 07:17 PM

Quote:

Originally Posted by blitzsti22

i got the same wheels but mine at 18*9.5 all around 12 offset before coilovers ill try and get better pics tmr morning

more pics nowwww!!! lol are you running spacers in the front?

quick question...

i got a set of Gt-Cs a couple of months back and i wanna run them on my daily kouki... i wanted to do overs all around at first but i really wanna make them fit on the stock body... my question is how big of a pull am i gonna need, or would i be ok with just a good roll.

i dont wanna run too much camber since its my daily.. i dont wanna get a second job just to afford tires. lol..

specs are

19x9.5 +9 front
19x10.5 -11 rear

i have already thought about all of it, i just want some opinions from more experienced peeps....

thanks in advance....

95KA-Turbo · 05-25-2009, 10:45 PM

I am completely forgien with picking out 19" tires...and basically fitting 19s in general on S chassis. I know width and offset wise though your fronts will be fine with just a roll and 235 or 245 tire....probably a 245 since you'll probably have 35 series side walls.

For the rear on a S14 they'll stick out ~17mms further out then my rear wheels do. I pulled my rear fenders and am running ~-2 camber out back...so not a lot of camber at all. I'm also running 255/40/17s - which isn't exactly a short tire. If you ran some 245/35s out back (I am not even sure if you can stretch that because I'm out of my territory with 19s) with some more neg camber, like closer to -3 at least you should be able to get away with just a pull out back.

Someone who's run sizes closer to that can fill in the gaps.

To not clutter the page with nothing buy typing:

My friend's S14 - 17X10s all around...I think 225/45s all around...I want to say +12 effectively up front and +15 out back? I will get his actual specs and post them up.

kevtrinh · 05-25-2009, 10:55 PM

newborn240,

zombie DRIFT CAR - kevtrinh's posterous

95KA-Turbo · 05-25-2009, 11:58 PM

Jesus, Ian's car is retarded!

silviaguy240 · 05-26-2009, 10:40 AM

im pretty sure for your 19's you are going to need 265's in the rear at least. go look around of z/g forums for tiresize fitment on 19's.

ROIDMONKEY · 05-26-2009, 09:27 PM

little tease, some new old school shoes . for a bit of change 18x11-14

Royal_T · 05-26-2009, 09:42 PM

OMG!!!! That is sexy

hahaha and I love your sig it's my motto

ROIDMONKEY · 05-26-2009, 10:06 PM

Quote:

Originally Posted by Royal_T

OMG!!!! That is sexy

hahaha and I love your sig it's my motto

yep u right

Loved it

Royal_T · 05-26-2009, 10:26 PM

Hey if you don't mind me asking were did you get your wheels from? You can P.M.

Matej · 05-26-2009, 10:52 PM

Titanium finish wheels are so cheesy, the new setup looks great.

SlideAlliance · 05-26-2009, 11:51 PM

No.

Cheap "Prizm Lip" wheels are cheesy.

Legit wheels with Titanium lip are not.

miklos · 05-27-2009, 03:40 AM

Do I need to change from the stock struts to put taller tires on the S13? The stock strut seems to have an inch of clearance with a 15" 50 series tire.

05-23-2009, 10:06 PM	#4712
mbmbmb23 Zilvia Contributor Join Date: Oct 2001 Location: Charlotte, NC. Posts: 1,776 Trader Rating: (1) Rides Gallery: mbmbmb23 Feedback Score: 1 reviews	Quick question on fitment, i have a set of Weds 3 peice wheels (similar to VS-XX face).....Supra firment 16x9.5 +44 and 16x10.5 +44 ....any hope of fitting on my S13 hatch? I have +25 bolt on spacers up front as well and rolled (not pulled) fenders in back. thanks! __________________ 400x200

05-24-2009, 10:08 PM	#4720
Z33dori Post Whore! Join Date: Dec 2006 Location: Riverview, FL Age: 35 Posts: 5,557 Trader Rating: (12) Feedback Score: 12 reviews	the lowest one possible then stack a 15mm spacer __________________

05-25-2009, 10:45 PM	#4730
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 38 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	I am completely forgien with picking out 19" tires...and basically fitting 19s in general on S chassis. I know width and offset wise though your fronts will be fine with just a roll and 235 or 245 tire....probably a 245 since you'll probably have 35 series side walls. For the rear on a S14 they'll stick out ~17mms further out then my rear wheels do. I pulled my rear fenders and am running ~-2 camber out back...so not a lot of camber at all. I'm also running 255/40/17s - which isn't exactly a short tire. If you ran some 245/35s out back (I am not even sure if you can stretch that because I'm out of my territory with 19s) with some more neg camber, like closer to -3 at least you should be able to get away with just a pull out back. Someone who's run sizes closer to that can fill in the gaps. To not clutter the page with nothing buy typing: My friend's S14 - 17X10s all around...I think 225/45s all around...I want to say +12 effectively up front and +15 out back? I will get his actual specs and post them up. __________________ Instagram - SJKnoop

05-25-2009, 10:55 PM	#4731
kevtrinh Zilvia Junkie Join Date: May 2006 Location: Richmond,VA Posts: 370 Trader Rating: (0) Feedback Score: 0 reviews	newborn240, zombie DRIFT CAR - kevtrinh's posterous __________________ Team Pterodactyl

05-25-2009, 11:58 PM	#4732
95KA-Turbo Post Whore! Join Date: Jul 2005 Location: LA Age: 38 Posts: 3,402 Trader Rating: (19) Feedback Score: 19 reviews	Jesus, Ian's car is retarded! __________________ Instagram - SJKnoop

05-23-2009, 10:14 PM	#4713
dub40sx Zilvia Addict Join Date: Nov 2008 Location: Canada Age: 37 Posts: 737 Trader Rating: (5) Feedback Score: 5 reviews	that isnt even a question. You basically just told us what you have. If you are wondering how they will fit... very poorly unless you are running like 0 camber. 18x9.5 +17 225/40/18 bfg gforce 18x10.5 +17 255/35/18 bfg gforce I want different tires cause these ones are tarded. also needa get some 15-20mm spacers for the front so I stop rubbing my coils. gonna match up the rears with some spacers too so I have an excuse to run more than -1 degree of camber.

05-24-2009, 03:44 AM	#4716
nznew Leaky Injector Join Date: Nov 2008 Location: feilding New Zealand Age: 34 Posts: 89 Trader Rating: (0) Feedback Score: 0 reviews	17x9.5 -10 225 45 -3.5 degrees camber 18x12 -1 275 35 -3camber 25dmax fronts 30mm dmax rears

05-24-2009, 09:56 PM	#4719
gt2871r Leaky Injector Join Date: Apr 2009 Location: Calgary, AB Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	can someone help me figure out what gullflames i will need to fit my set up. s13 240, 20mm fronts, 30mm rears. i was thinking 17's in front, 18's in back. what offsets would be best? thank you. here is a site to what offsets the gullflames come in. any help would be appreciated: GP Sports Gravity Gullflame

05-24-2009, 10:11 PM	#4721
gt2871r Leaky Injector Join Date: Apr 2009 Location: Calgary, AB Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	so 17x9.5 +26 in the front and 18x9.5 +15 in the rear will fit 20mm front fenders and 30mm rear fenders?

05-24-2009, 11:12 PM	#4724
RPS13-604 Zilvia Junkie Join Date: May 2008 Location: Vancouver BC Age: 34 Posts: 386 Trader Rating: (0) Feedback Score: 0 reviews	Work meister s1 3pc 18x9.5 -3 on a 20mm front fender and a 18x11.5 -22 on a 50mm. i know it needs more low im getting the inner lip cut off on tuesday then im gonna slam it all the way down

05-24-2009, 11:17 PM	#4725
gottdeskrieges Leaky Injector Join Date: Aug 2007 Location: Alexandria, La. Posts: 148 Trader Rating: (1) Feedback Score: 1 reviews	Need help with tire fitment on rims on a s13 hatch. 18x8.5 +35 F and 18x10.5 +35 R widest tire i can put on rear with roll/shave. Spacers needed? I have z32 f/r calipers, tanabe coils as well.

05-26-2009, 10:40 AM	#4733
silviaguy240 Post Whore! Join Date: Feb 2005 Location: Delaware Age: 35 Posts: 3,719 Trader Rating: (15) Feedback Score: 15 reviews	im pretty sure for your 19's you are going to need 265's in the rear at least. go look around of z/g forums for tiresize fitment on 19's. __________________

05-26-2009, 09:27 PM	#4734
ROIDMONKEY Nissanaholic! Join Date: Jul 2007 Location: HollyFLORIDA Posts: 2,027 Trader Rating: (4) Rides Gallery: ROIDMONKEY Feedback Score: 4 reviews	little tease, some new old school shoes . for a bit of change 18x11-14 __________________ TRUE thing: True ////OFFSET\\\\ is acheived without spacers Running on E85 570whp Precision 5862....laggy as fuck. hate it

05-26-2009, 09:42 PM	#4735
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 41 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	OMG!!!! That is sexy hahaha and I love your sig it's my motto __________________ http://zilvia.net/advertise.html

05-26-2009, 10:26 PM	#4737
Royal_T Zilvia Addict Join Date: Feb 2009 Location: TX Age: 41 Posts: 813 Trader Rating: (1) Feedback Score: 1 reviews	Hey if you don't mind me asking were did you get your wheels from? You can P.M. __________________ http://zilvia.net/advertise.html

05-26-2009, 10:52 PM	#4738
Matej Post Whore! Join Date: Feb 2007 Location: N/A Posts: 9,423 Trader Rating: (39) Feedback Score: 39 reviews	Titanium finish wheels are so cheesy, the new setup looks great.

05-26-2009, 11:51 PM	#4739
SlideAlliance Zilvia Junkie Join Date: Aug 2007 Location: Newport Posts: 503 Trader Rating: (0) Feedback Score: 0 reviews	No. Cheap "Prizm Lip" wheels are cheesy. Legit wheels with Titanium lip are not. __________________ Battle Idol Works 2015

05-27-2009, 03:40 AM	#4740
miklos Zilvia Member Join Date: Sep 2006 Location: South Bay California Posts: 269 Trader Rating: (0) Feedback Score: 0 reviews	Wheel height Do I need to change from the stock struts to put taller tires on the S13? The stock strut seems to have an inch of clearance with a 15" 50 series tire.