Need some advice on s13 fix - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ricardo.benin · 02-23-2016, 07:08 PM

So I got a s13, I traded a sr20 Ecu for it. Anyways I am swapping a v8 in the car and I was inspecting the car and came across a big problem, the tension rod bracket is welded to the frame rail. Only one bracket is welder but I inspected the problem and there is nothing wrong with bolt hole or threaded alignment stud so I do not know why they did that anyways I am thinking about grinding off the bracket and weld and possibly put in a repair piece. Let me know if you have any info or comments on other possible ideas and ways to repair the problem.
Thanks

02-23-2016, 07:08 PM	#1
ricardo.benin Leaky Injector Join Date: Dec 2012 Location: us Posts: 70 Trader Rating: (0) Feedback Score: 0 reviews	Need some advice on s13 fix So I got a s13, I traded a sr20 Ecu for it. Anyways I am swapping a v8 in the car and I was inspecting the car and came across a big problem, the tension rod bracket is welded to the frame rail. Only one bracket is welder but I inspected the problem and there is nothing wrong with bolt hole or threaded alignment stud so I do not know why they did that anyways I am thinking about grinding off the bracket and weld and possibly put in a repair piece. Let me know if you have any info or comments on other possible ideas and ways to repair the problem. Thanks Last edited by ricardo.benin; 02-24-2016 at 08:36 AM..