S-Chassis Dual Caliper Kit!!! NEW! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

D.Bo · 08-19-2011, 11:08 AM

Quote:

Originally Posted by AzNCmB

i dont have a drift car s14 anymore, hoping one of my buddies pick up a set of these so i can test fit it on my z33 drift cahhh'

Quote:

Originally Posted by george

I'm actually going to be testing this setup on a Z33 soon. It might just work!

Im goin to be buying a set at end of august/early september for the s13.. Goin to test fit it on his Z and see if itll work. if you havent tried it by then ill let you know if itll work or not.

fckillerbee · 08-19-2011, 04:12 PM

very cool setup.

I would like to see a complete kit from the beginning.

Pblesh85 · 08-20-2011, 10:57 AM

I really like this set up, but have a few questions.

Would this work with a rear evo/sti caliper ?

Can it be made to work on a normal oem rear upright(240sx) ?

What are if any options on aftermarket rear rotors(i.e. project mu, ect) ?

Im asking because I have evo rear calipers right now. If this would work id like to pick up a second pair and run dual evo calipers. Ideally I would prefere a smaller wilwood caliper(can be bought new for cheaper than the brembo and are lighter). Also I really dont see a need to switch to 300zx rear uprights. its just more sit I have to buy...

So with what I have in mind would it be cheaper to do a custom setup ?

Any input is welcomed(constructive)... thank you

maverickmotorsports · 08-20-2011, 11:35 AM

Quote:

Originally Posted by Pblesh85

I really like this set up, but have a few questions.

Would this work with a rear evo/sti caliper ?

Can it be made to work on a normal oem rear upright(240sx) ?

What are if any options on aftermarket rear rotors(i.e. project mu, ect) ?

Im asking because I have evo rear calipers right now. If this would work id like to pick up a second pair and run dual evo calipers. Ideally I would prefere a smaller wilwood caliper(can be bought new for cheaper than the brembo and are lighter). Also I really dont see a need to switch to 300zx rear uprights. its just more sit I have to buy...

So with what I have in mind would it be cheaper to do a custom setup ?

Any input is welcomed(constructive)... thank you

I haven't had a chance to put on the evo/sti caliper. If I can find a set I will test the fitment.

This definitely works with steel uprights from the s13/s14/s15/etc.

There are plenty of aftermarket companies making rotors for the mustangs.

Pblesh85 · 08-20-2011, 05:01 PM

I will let you use mine for test fitment and mock up for a good deal... if this sounds like you would be down pm me...

cjmirabal1 · 08-20-2011, 05:46 PM

simply amazing!

HAWAII · 08-21-2011, 09:44 PM

How do we pay for it? Paypal?

maverickmotorsports · 08-22-2011, 12:45 AM

Quote:

Originally Posted by HAWAII

How do we pay for it? Paypal?

Paypal is the most convenient and preferred method.

Dustxking · 08-22-2011, 11:54 PM

Once i see how much my raise is going to be here in a few weeks i am going to be ordering.

maverickmotorsports · 08-23-2011, 05:55 PM

I've had a few questions on international shipment. The pricing is as follows.

$250 USD Shipped to the US.

$270 USD Shipped to Canada/Mexico

$290 USD Shipped internationally. Please contact me before sending money for international orders.

Thank you for all the orders. These are selling quick!

drift donkey · 08-23-2011, 07:09 PM

damn to bad that pushes out 8mm, I will have find a deal on some rims. U guys got any sizes of offset your are using?
I still would likie to rock my tucked rims!

street240sx · 08-29-2011, 04:47 AM

Ive been wanting to do this setup and researching possible parking brake calipers. Hopefully I can order a set and test it out soon. Gotta love local products.

And how much for local pick up? Ill be up in Phx on Thursday for a concert

rbs14kouki · 08-29-2011, 11:03 PM

i got my dual caliper set-up this morning ! looks like its going to work with DW spindle

i will test with calipers tomorow ...

maverickmotorsports · 08-31-2011, 05:30 PM

I WILL BE LEAVING FOR VACATION SEPT 1 to SEPT 16th. ALL ORDERS RECEIVED BEFORE AUG 31 11pm MST WILL SHIP OUT BEFORE I LEAVE. Thanks! - George

rbs14kouki · 09-01-2011, 10:00 PM

the bracket is not working with the DW rear knuckles ...

i tryed hard to mak it work ... change fasteners for different ones but no chance

with the hub bolted to all suspension arm ... there is no place for the top bolt for that second caliper

rbs14kouki · 09-01-2011, 10:14 PM

but it works perfect with the stock up set-up .... i just had to put in the bolt for the lower bracket (the caliper on the other side were the stock caliper bolt) before bolting the bearing in place (4x bolt behind the up-right) or else the bolt would not slip in and i didnt want to trim the knuckle ...

blu808 · 09-02-2011, 12:07 PM

George.

Tried pming you but your box is full. Please let me know if there is a way to get a set right away. We need one for our Formula D s14.

Thanks.
Luke
408-515-9598

MiamiZ33 · 09-02-2011, 10:24 PM

Any luck getting these to fit on a Z33? Will the Z33 brake calipers fit your bracket?

If they fit, I will place an order ASAP!

MiamiZ33 · 09-02-2011, 10:27 PM

Quote:

Originally Posted by MiamiZ33

Any luck getting these to fit on a Z33? Will the Z33 brake calipers fit your bracket?

If they fit, I will place an order ASAP!

I'd be willing to test fit it on my Z if nobody has had a chance to fit it up yet.

slideslidegnarslide · 09-03-2011, 06:10 AM

This thing is awesome I need one soon

Biggamehit · 09-03-2011, 06:31 AM

nice stuff very interested

RHDphil · 09-15-2011, 09:45 PM

I installed and track tested these over the weekend at Freedom Moves/HTL in Etown NJ, worked great with my pbm hydro hand brake, i love it, i got it day before event, took awile to get because of some mixup but he gave me a partial refund for the inconvenience, he is a good seller and its a good quality part.

i must add tho, had to grind some to fit it on my s14, also hub centric rings dont fit, idk if its been tested on s14 yet or not but i have a 96 and rings did not fit, hub gets thicker down at bottom ware rotor sits, had to grind a small bit off back or handbrake caliper, ware stock 300zx bracket bolts to and a bit on spindle so the 2 spots dont hit or it would not sit flat

ill get pics later, all in all not a big deal and it works great

thefro526 · 09-20-2011, 07:29 AM

Quote:

Originally Posted by rbs14kouki

the bracket is not working with the DW rear knuckles ...

i tryed hard to mak it work ... change fasteners for different ones but no chance

with the hub bolted to all suspension arm ... there is no place for the top bolt for that second caliper

So what you're saying is that the RUCA bolt hits the upper mounting bolt on the secondary caliper? Did you look into getting low profile bolts? Is there any way you can post a picture of the interference?

maverickmotorsports · 09-20-2011, 09:03 PM

Quote:

Originally Posted by RHDphil

I installed and track tested these over the weekend at Freedom Moves/HTL in Etown NJ, worked great with my pbm hydro hand brake, i love it, i got it day before event, took awile to get because of some mixup but he gave me a partial refund for the inconvenience, he is a good seller and its a good quality part.

i must add tho, had to grind some to fit it on my s14, also hub centric rings dont fit, idk if its been tested on s14 yet or not but i have a 96 and rings did not fit, hub gets thicker down at bottom ware rotor sits, had to grind a small bit off back or handbrake caliper, ware stock 300zx bracket bolts to and a bit on spindle so the 2 spots dont hit or it would not sit flat

ill get pics later, all in all not a big deal and it works great

Thanks for your business and understanding Phil!

Doing business from 7000 miles away with limited inet access is not easy.

But I'm back now and orders will be more smooth.

As far as the hubcentric rings go. I've noticed on a few cars that there is a decent bit of surface rust built up on most OEM hubs. If you hit the hub with a scotch pad or wire wheel it will fit. Otherwise the tolerances are so tight that the rust will prevent the ring from going on.

HAWAII · 09-22-2011, 07:53 PM

George! Could you post up paypal address? For the life of me I cannot seem to find it. Thanks!

Zerodragon118 · 09-30-2011, 12:43 AM

just to ask would this work on a s15

maverickmotorsports · 10-03-2011, 09:22 AM

I'm currently all sold out guys. Should have the next shipment in 3-4 weeks.

Yes, these will work on S15.

slideways90 · 10-03-2011, 07:17 PM

so bummed about the issue with driftworks

rbs14kouki · 10-04-2011, 01:04 AM

Stew made them work with the DW spindles !!! Look in is build thread

I will try again tomorow to make them work .

FZY_BMPR001 · 10-10-2011, 12:20 AM

So this would eliminate the Z32 stock drum style ebrake setup correct?

08-20-2011, 10:57 AM	#33
Pblesh85 Nissanaholic! Join Date: Sep 2005 Location: Tacoma wa Age: 39 Posts: 1,897 Trader Rating: (48) Feedback Score: 48 reviews	I really like this set up, but have a few questions. Would this work with a rear evo/sti caliper ? Can it be made to work on a normal oem rear upright(240sx) ? What are if any options on aftermarket rear rotors(i.e. project mu, ect) ? Im asking because I have evo rear calipers right now. If this would work id like to pick up a second pair and run dual evo calipers. Ideally I would prefere a smaller wilwood caliper(can be bought new for cheaper than the brembo and are lighter). Also I really dont see a need to switch to 300zx rear uprights. its just more sit I have to buy... So with what I have in mind would it be cheaper to do a custom setup ? Any input is welcomed(constructive)... thank you __________________ Do you suffer from vaginal dryness...

08-20-2011, 05:01 PM	#35
Pblesh85 Nissanaholic! Join Date: Sep 2005 Location: Tacoma wa Age: 39 Posts: 1,897 Trader Rating: (48) Feedback Score: 48 reviews	I will let you use mine for test fitment and mock up for a good deal... if this sounds like you would be down pm me... __________________ Do you suffer from vaginal dryness...

08-23-2011, 05:55 PM	#40
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	I've had a few questions on international shipment. The pricing is as follows. $250 USD Shipped to the US. $270 USD Shipped to Canada/Mexico $290 USD Shipped internationally. Please contact me before sending money for international orders. Thank you for all the orders. These are selling quick! __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

08-23-2011, 07:09 PM	#41
drift donkey Zilvia Member Join Date: Oct 2006 Location: MO/IL Posts: 235 Trader Rating: (3) Feedback Score: 3 reviews	damn to bad that pushes out 8mm, I will have find a deal on some rims. U guys got any sizes of offset your are using? I still would likie to rock my tucked rims! Last edited by drift donkey; 08-23-2011 at 07:10 PM.. Reason: spelling

08-29-2011, 11:03 PM	#43
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	i got my dual caliper set-up this morning ! looks like its going to work with DW spindle i will test with calipers tomorow ... __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

08-19-2011, 04:12 PM	#32
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 39 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	very cool setup. I would like to see a complete kit from the beginning.

08-20-2011, 05:46 PM	#36
cjmirabal1 Zilvia Member Join Date: Aug 2010 Location: Tampa Age: 35 Posts: 155 Trader Rating: (2) Feedback Score: 2 reviews	simply amazing!

08-21-2011, 09:44 PM	#37
HAWAII Zilvia Addict Join Date: Jun 2009 Location: Burbank,Ca Age: 48 Posts: 716 Trader Rating: (24) Feedback Score: 24 reviews	How do we pay for it? Paypal?

08-22-2011, 11:54 PM	#39
Dustxking Zilvia Addict Join Date: Nov 2007 Location: 360 Age: 35 Posts: 709 Trader Rating: (4) Feedback Score: 4 reviews	Once i see how much my raise is going to be here in a few weeks i am going to be ordering.

08-29-2011, 04:47 AM	#42
street240sx Zilvia Addict Join Date: Apr 2010 Location: AZ Posts: 805 Trader Rating: (22) Feedback Score: 22 reviews	Ive been wanting to do this setup and researching possible parking brake calipers. Hopefully I can order a set and test it out soon. Gotta love local products. And how much for local pick up? Ill be up in Phx on Thursday for a concert

08-31-2011, 05:30 PM	#44
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	I WILL BE LEAVING FOR VACATION SEPT 1 to SEPT 16th. ALL ORDERS RECEIVED BEFORE AUG 31 11pm MST WILL SHIP OUT BEFORE I LEAVE. Thanks! - George __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

09-01-2011, 10:00 PM	#45
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	the bracket is not working with the DW rear knuckles ... i tryed hard to mak it work ... change fasteners for different ones but no chance with the hub bolted to all suspension arm ... there is no place for the top bolt for that second caliper __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

09-01-2011, 10:14 PM	#46
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	but it works perfect with the stock up set-up .... i just had to put in the bolt for the lower bracket (the caliper on the other side were the stock caliper bolt) before bolting the bearing in place (4x bolt behind the up-right) or else the bolt would not slip in and i didnt want to trim the knuckle ... __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

09-02-2011, 12:07 PM	#47
blu808 Post Whore! Join Date: Dec 2002 Location: Campbell, Ca Age: 41 Posts: 5,010 Trader Rating: (3) Feedback Score: 3 reviews	George. Tried pming you but your box is full. Please let me know if there is a way to get a set right away. We need one for our Formula D s14. Thanks. Luke 408-515-9598 __________________

09-02-2011, 10:24 PM	#48
MiamiZ33 Zilvia Member Join Date: Sep 2011 Location: Miami, FL Age: 40 Posts: 258 Trader Rating: (1) Feedback Score: 1 reviews	Any luck getting these to fit on a Z33? Will the Z33 brake calipers fit your bracket? If they fit, I will place an order ASAP!

09-03-2011, 06:10 AM	#50
slideslidegnarslide Zilvia FREAK! Join Date: Mar 2010 Location: philly area Age: 34 Posts: 1,408 Trader Rating: (29) Feedback Score: 29 reviews	This thing is awesome I need one soon

09-03-2011, 06:31 AM	#51
Biggamehit Zilvia Addict Join Date: Jan 2005 Location: Misawa Japan Age: 41 Posts: 713 Trader Rating: (11) Feedback Score: 11 reviews	nice stuff very interested __________________ Facebook: Pink Ranger Drift

09-15-2011, 09:45 PM	#52
RHDphil Leaky Injector Join Date: Sep 2010 Location: NC/CT Age: 38 Posts: 85 Trader Rating: (2) Feedback Score: 2 reviews	I installed and track tested these over the weekend at Freedom Moves/HTL in Etown NJ, worked great with my pbm hydro hand brake, i love it, i got it day before event, took awile to get because of some mixup but he gave me a partial refund for the inconvenience, he is a good seller and its a good quality part. i must add tho, had to grind some to fit it on my s14, also hub centric rings dont fit, idk if its been tested on s14 yet or not but i have a 96 and rings did not fit, hub gets thicker down at bottom ware rotor sits, had to grind a small bit off back or handbrake caliper, ware stock 300zx bracket bolts to and a bit on spindle so the 2 spots dont hit or it would not sit flat ill get pics later, all in all not a big deal and it works great

09-22-2011, 07:53 PM	#55
HAWAII Zilvia Addict Join Date: Jun 2009 Location: Burbank,Ca Age: 48 Posts: 716 Trader Rating: (24) Feedback Score: 24 reviews	George! Could you post up paypal address? For the life of me I cannot seem to find it. Thanks!

09-30-2011, 12:43 AM	#56
Zerodragon118 Leaky Injector Join Date: Sep 2011 Location: South Florida Age: 35 Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	just to ask would this work on a s15

10-03-2011, 09:22 AM	#57
maverickmotorsports Zilvia Junkie Join Date: Nov 2005 Location: AZ Posts: 306 Trader Rating: (15) Feedback Score: 15 reviews	I'm currently all sold out guys. Should have the next shipment in 3-4 weeks. Yes, these will work on S15. __________________ -George Marstanovic Sr to VQ transmission adapter, dual caliper brackets, high angle tensions rods, and more! http://www.maverick-motorsports.com/collections/all

10-03-2011, 07:17 PM	#58
slideways90 Leaky Injector Join Date: Jan 2007 Location: Charlotte, NC Posts: 111 Trader Rating: (0) Feedback Score: 0 reviews	so bummed about the issue with driftworks

10-04-2011, 01:04 AM	#59
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 37 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	Stew made them work with the DW spindles !!! Look in is build thread I will try again tomorow to make them work . __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

10-10-2011, 12:20 AM	#60
FZY_BMPR001 Join Date: Aug 2010 Location: Sugarland TX Age: 39 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	So this would eliminate the Z32 stock drum style ebrake setup correct?