Falken Hanabi 17x9 +20 - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

conner · 01-30-2007, 07:46 PM

I got 'em, and I like them.

17x7.5 +32 Front
17x9 +20 Rear

Conner

speedstar01 · 01-30-2007, 08:34 PM

Quote:

Originally Posted by conner

I got 'em, and I like them.

17x7.5 +32 Front
17x9 +20 Rear

Conner

are you running lowering springs in this pic?? fendor pull,roll?

looks pretty cool

SimpleS14 · 01-30-2007, 08:46 PM

hmm...they don't look too bad. where would someone go to get a set?

BaliLover · 01-30-2007, 09:17 PM

I've had them in bronze for close to 2.5 years and I have NO issues with chipping on any of them, and since my car is primer it only gets washed like 2 times a year. I don't baby my car, I drive through dirt/mud/gravel, etc. I have a few small stains from brake dust sitting on them for 8 months before I washed them but even those appear to come off if you scrub them hard enough.

sidewayz240 · 01-30-2007, 09:30 PM

some silver hanabi's 17x9 +20 all around, on a local s14

i'd rock em

McRussellPants · 01-30-2007, 09:36 PM

Quote:

Originally Posted by conner

I got 'em, and I like them.

Conner

blackflag_Rms13 · 01-30-2007, 09:49 PM

Why'd you bitch out on the front? 7.5 is trash son.

A Spec Products · 01-30-2007, 11:04 PM

Quote:

Originally Posted by byhi

^^^ or you could holla atcha boy......

honestly, loga nwas slingin grenades and CRkais for very cheap for a while, i know they are both less than 1400 a set brand new if memory serves me correct.... which is a couple hundred more than one wheel of other various brands...

Yeah, Grenades were the hotness when I was selling them

4 lug and like $250 a wheel for 17x9+15s

And they looked good too

Oh well, can't get them anymore

I get a lot of calls about them these days, I dunno why

EroGori · 01-30-2007, 11:06 PM

Personally I'd rather rock grenades, CR Kai's or FN's even if it did cost me some extra money. For some reason those wheels just look cheap.

byhi · 01-30-2007, 11:48 PM

^^ because they look like oem honda prelude joints.....

Kn1ves · 01-31-2007, 12:25 AM

Quote:

Originally Posted by byhi

^^ because they look like oem honda prelude joints.....

now i understand why ur so pissed. its cuz of my sig.
since your pride and joy is ur rims, fabolous profounds, baller rims for sure, on an s14 though? not so ballin. if you gonna step your game up and try to be VIP, at least do it with the right car. take your own advice and dont half ass your shit, buy the right car.

wonder what witty remark you'll come up with next

byhi · 01-31-2007, 08:11 AM

Quote:

Originally Posted by Kn1ves

now i understand why ur so pissed. its cuz of my sig.
since your pride and joy is ur rims, fabolous profounds, baller rims for sure, on an s14 though? not so ballin. if you gonna step your game up and try to be VIP, at least do it with the right car. take your own advice and dont half ass your shit, buy the right car.

wonder what witty remark you'll come up with next

wow, all that babble and no point made, you dumb piece of shit. I bought those wheels because they ...

A. look nasty

B. are forged

c. are three piece, so if i fuck up a barrel-half, a new one can be sources easily and repaired

the fabulous profounds were bought for both aesthetics and durability/construction, but oh no!!! little fucking knives needed to jump to conclusions and spout his mouth off before doing research and or knowing dick about wheel construction...

so technically, i coulda bought work meisters and you wouldnt be bitchign right? because i do own a set in rediculous sizes (3 piece, strong, look decent).... but i decided to mix it up for 2007... would you like to see any number of the sets of wheels i own so you can critique them all?

in the end, you bitch at me for having too nice of wheels..... when you are about to buy dick-fuck cookie cutter 1999 holla -slamboy joints...

...i'd rather be on my side of the fence if i had the choice...

btw keep neg/ repping me knives, its getting me off

Taniguchi_Is_#1 · 01-31-2007, 08:21 AM

Quote:

Originally Posted by Kn1ves

now i understand why ur so pissed. its cuz of my sig.
since your pride and joy is ur rims, fabolous profounds, baller rims for sure, on an s14 though? not so ballin. if you gonna step your game up and try to be VIP, at least do it with the right car. take your own advice and dont half ass your shit, buy the right car.

wonder what witty remark you'll come up with next

have you ever looked at the MSRP on profounds. seriously? that's baller regardless of what car it's on. you could put them on a daihatsu midget and it'd still probably be the ballerest shit i've ever seen. only vip style? not really. i recall seeing garson deep racing and agle minerva on drift cars. they aren't exactly the uber drift spec wheel like fn01rc's. don't knock shit just because you can't afford it. people might as well tell you to buy a civic because you aren't getting TE37's for your s13.

TforTits · 01-31-2007, 10:00 AM

Jesus christ those wheels suck some ass.

zenki-217 · 01-31-2007, 12:27 PM

Here is a couple of pics from when i had them

I bought them like 2years ago .The main reason I bought them is because I was 4 lug,broke, and didnt want the fnr's... I should have just got some cheap wheels from rb motoring... But any who I wouldnt really recomend these wheels if your wanting some thing functional.. There heavy.

Ian · 01-31-2007, 12:28 PM

I personally think they're ugly and not worth it

Just save another month or two and buy something better

zenki-217 · 01-31-2007, 12:29 PM

Oh I dont know if anyone noticed but there all casted the in the same direction so one side will slant back while the other will slant forward.

JacobT · 01-31-2007, 01:58 PM

I have them on my car, I like the way they look.

17x9 +20 all around
235/40/17 all around
1.3" drop
No rolling/pulling

conner · 01-31-2007, 04:58 PM

I bitched out cuz i'm a bitch...nah i just wanted the staggered look...the wider lip in the back looks good I think.

Yeah it is lowered. APEXi EXV N1 32-way.
This picture was before the rear was pulled, but i'll try to get another pic. I think it looks pretty sweet.

Oh and as for where to get a set...SEARS BABY!

Conner

byhi · 01-31-2007, 05:13 PM

sears for falken wheels? your kidding???

conner · 01-31-2007, 05:19 PM

Nope. Yeah it is pretty fucking retarded but I saw them there and I went ahead and got them.

Conner

8kred · 01-31-2007, 05:26 PM

i dig them.........

Kn1ves · 02-01-2007, 12:18 AM

Quote:

Originally Posted by byhi

sears for falken wheels? your kidding???

man ur hilarious, im not neg repping you. theres a limit to the amount of neg rep u can give to a person, you can do it consecutively.

it just shows that the rest of zilvia thinks ur a jackass.

hardparkers ftl

McRussellPants · 02-01-2007, 12:37 AM

I got this from rofl barfing at the dude with the picture of himself in his car obvioulsy taken by mommy.

"your adopted, your parents don't love you, get the fuck off here and go make a friend, dicksmack"

Since Im on the rep downswing anyways I might as well mention that the only thing gayer than buying rims at sears, much more so for Hanabis, is going to clubs, finding used condoms and then emptying their contents into your anus.

01-30-2007, 07:46 PM	#31
conner Leaky Injector Join Date: Nov 2006 Location: VA Age: 35 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	I got 'em, and I like them. 17x7.5 +32 Front 17x9 +20 Rear Conner __________________ SYDE WYZ

01-30-2007, 08:46 PM	#33
SimpleS14 Post Whore! Join Date: Feb 2002 Location: Philly Age: 41 Posts: 9,185 Trader Rating: (0) Rides Gallery: SimpleS14 Feedback Score: 0 reviews	hmm...they don't look too bad. where would someone go to get a set? __________________ *Goals are dreams with a deadline.* L.H.O.O.Q.

01-30-2007, 09:30 PM	#35
sidewayz240 Zilvia Junkie Join Date: Mar 2005 Location: Toronto Age: 33 Posts: 327 Trader Rating: (6) Feedback Score: 6 reviews	some silver hanabi's 17x9 +20 all around, on a local s14 i'd rock em __________________ -Trevor

01-31-2007, 04:58 PM	#49
conner Leaky Injector Join Date: Nov 2006 Location: VA Age: 35 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	I bitched out cuz i'm a bitch...nah i just wanted the staggered look...the wider lip in the back looks good I think. Yeah it is lowered. APEXi EXV N1 32-way. This picture was before the rear was pulled, but i'll try to get another pic. I think it looks pretty sweet. Oh and as for where to get a set...SEARS BABY! Conner __________________ SYDE WYZ

01-31-2007, 05:19 PM	#51
conner Leaky Injector Join Date: Nov 2006 Location: VA Age: 35 Posts: 51 Trader Rating: (0) Feedback Score: 0 reviews	Nope. Yeah it is pretty fucking retarded but I saw them there and I went ahead and got them. Conner __________________ SYDE WYZ

01-30-2007, 09:17 PM	#34
BaliLover Leaky Injector Join Date: Jun 2004 Location: Central Florida Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	I've had them in bronze for close to 2.5 years and I have NO issues with chipping on any of them, and since my car is primer it only gets washed like 2 times a year. I don't baby my car, I drive through dirt/mud/gravel, etc. I have a few small stains from brake dust sitting on them for 8 months before I washed them but even those appear to come off if you scrub them hard enough.

01-30-2007, 09:49 PM	#37
blackflag_Rms13 Zilvia FREAK! Join Date: Aug 2005 Location: Bay Area Posts: 1,133 Trader Rating: (0) Feedback Score: 0 reviews	Why'd you bitch out on the front? 7.5 is trash son.

01-30-2007, 11:06 PM	#39
EroGori Leaky Injector Join Date: Oct 2005 Location: Spokane, WA Posts: 140 Trader Rating: (0) Feedback Score: 0 reviews	Personally I'd rather rock grenades, CR Kai's or FN's even if it did cost me some extra money. For some reason those wheels just look cheap.

01-30-2007, 11:48 PM	#40
byhi BANNED Join Date: Jan 2005 Location: ohio Posts: 531 Trader Rating: (0) Feedback Score: 0 reviews	^^ because they look like oem honda prelude joints.....

01-31-2007, 10:00 AM	#44
TforTits Join Date: Jan 2007 Location: Texazazazazazazaza Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Jesus christ those wheels suck some ass.

01-31-2007, 12:27 PM	#45
zenki-217 Zilvia Junkie Join Date: May 2006 Location: virgin islands Posts: 454 Trader Rating: (0) Feedback Score: 0 reviews	Here is a couple of pics from when i had them I bought them like 2years ago .The main reason I bought them is because I was 4 lug,broke, and didnt want the fnr's... I should have just got some cheap wheels from rb motoring... But any who I wouldnt really recomend these wheels if your wanting some thing functional.. There heavy.

01-31-2007, 12:29 PM	#47
zenki-217 Zilvia Junkie Join Date: May 2006 Location: virgin islands Posts: 454 Trader Rating: (0) Feedback Score: 0 reviews	Oh I dont know if anyone noticed but there all casted the in the same direction so one side will slant back while the other will slant forward.

01-31-2007, 01:58 PM	#48
JacobT Leaky Injector Join Date: Jun 2006 Location: Windsor, Canada Age: 36 Posts: 81 Trader Rating: (4) Feedback Score: 4 reviews	I have them on my car, I like the way they look. 17x9 +20 all around 235/40/17 all around 1.3" drop No rolling/pulling

01-31-2007, 05:13 PM	#50
byhi BANNED Join Date: Jan 2005 Location: ohio Posts: 531 Trader Rating: (0) Feedback Score: 0 reviews	sears for falken wheels? your kidding???

01-31-2007, 05:26 PM	#52
8kred Zilvia Junkie Join Date: Mar 2004 Location: nor-cal Posts: 306 Trader Rating: (0) Feedback Score: 0 reviews	i dig them......... __________________

02-01-2007, 12:37 AM	#54
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	I got this from rofl barfing at the dude with the picture of himself in his car obvioulsy taken by mommy. "your adopted, your parents don't love you, get the fuck off here and go make a friend, dicksmack" Since Im on the rep downswing anyways I might as well mention that the only thing gayer than buying rims at sears, much more so for Hanabis, is going to clubs, finding used condoms and then emptying their contents into your anus.