P2M Upgraded Nissan S13 S14 SR20DET Ignition Coil Packs Now Released!

[phase2]

P2M Nissan S13 S14 SR20DET (RWD) ignition coil pack set is a direct replacement over the factory unit with the following improved features:

- Strictly produced via TS16949 certified manufacturing facility
- Top quality high insulation expoxy
- Top quality high voltage di-electric resistant resin
- 15% stronger spark output than factory unit
- Increased winding and improved iron core
- Dyno proven performance (+4rwhp / +5 ft lbs torque peak to peak)
- Compatible with all aftermarket ignition box upgrade

** Dyno graph based on stock S13 SR20DET running stock 8-9psi (0.6bar)





Can be ordered directly through our website or any P2M product distributors:

http://www.phase2motortrend.com/prod...cp50f01-tt.htm

[dorkidori_s13]

count on me ordering a set of these soon! i am quite pleased with your throttle body velocity stack ring and the difference it made along with your side feed fuel rail (especially how nicely it installed). i look forward to running these in the near future!

[battery1882]

Is that price for all 4?

[fatduece]

Very nice, but pricey. How does it compare to the splitfire?

http://www.frsport.com/DIS-004-Direc...FUWVfgodzlcM9A

[phase2]

Originally Posted by battery1882

Is that price for all 4?

Yes price is for a set of 4pcs

Sent from my SM-G928T using Tapatalk

[phase2]

Originally Posted by dorkidori_s13

count on me ordering a set of these soon! i am quite pleased with your throttle body velocity stack ring and the difference it made along with your side feed fuel rail (especially how nicely it installed). i look forward to running these in the near future!

Thank you for your support [emoji1]

Sent from my SM-G928T using Tapatalk

[phase2]

Originally Posted by fatduece

Very nice, but pricey. How does it compare to the splitfire?

http://www.frsport.com/DIS-004-Direc...FUWVfgodzlcM9A

These are priced 1/3 from Splitfire price as far as I can see. Mainly these serve as OE replacement and an upgrade for people looking to replace their bad coils but instead of shelling out 60-70 bucks for a Genuine stock unit, you get to replace all four with an upgrade.

Watch our release of our stage two ignition upgrade amplifier box next year 2016, it will work nicely with our existing coil packs and still end up cheaper than Splitfires.

The stage two ignition box will be plug and play with Wiring Specialties built Pro harness. [emoji106]

Sent from my SM-G928T using Tapatalk

[dorkidori_s13]

quick question, will you sell singles of these incase one burns up? (that common problem that plagued Splitfires)

[phase2]

Originally Posted by dorkidori_s13

quick question, will you sell singles of these incase one burns up? (that common problem that plagued Splitfires)

Ofcourse we can, but this product is backed by our lifetime warranty we will replace the coils if they happen to burn out.

Sent from my SM-G928T using Tapatalk

[economix]

Originally Posted by phase2

Ofcourse we can, but this product is backed by our lifetime warranty we will replace the coils if they happen to burn out.

Between the price, increased performance, and lifetime warranty, I don't think I have a reason to buy from another vendor. You guys made this a totally awesome offering!

[vipergtsr1000hp]

Dang my splitfire coilpacks just came in this past week...Why couldnt this be out earlier lol. Also, thumbs up for the great prices and products you guys offer.

[fatduece]

Originally Posted by phase2

These are priced 1/3 from Splitfire price as far as I can see. Mainly these serve as OE replacement and an upgrade for people looking to replace their bad coils but instead of shelling out 60-70 bucks for a Genuine stock unit, you get to replace all four with an upgrade.

Watch our release of our stage two ignition upgrade amplifier box next year 2016, it will work nicely with our existing coil packs and still end up cheaper than Splitfires.

The stage two ignition box will be plug and play with Wiring Specialties built Pro harness. [emoji106]

Sent from my SM-G928T using Tapatalk

I see. Thanks for responding

[punkzdriver]

Will these work on a VVL head?

[RalliartRsX]

Originally Posted by punkzdriver

Will these work on a VVL head?

Unfortunately, these will not

[SR20DETsilvia]

Have you tested these with any sort of ignition amplifier? I'm currently running the HKS Twin Power on my SR with stock coil packs, haven't had an issue but these seem a little "fresher" and wouldn't mind ordering/installing these more for piece of mind.

[phase2]

Originally Posted by SR20DETsilvia

Have you tested these with any sort of ignition amplifier? I'm currently running the HKS Twin Power on my SR with stock coil packs, haven't had an issue but these seem a little "fresher" and wouldn't mind ordering/installing these more for piece of mind.

Our P2M upgraded coil packs will work with all aftermarket ignition amplifier. The iron core and coil has also been improved so in essence they are actually stronger than stock in terms of reliability.

We will also be releasing our P2M plug and play amplifier for 2016 year which will work with our coil packs and stock coil packs, and will offer another ignition combo package for the amplifier + P2M coil packs combined.

[Dboyizmlg]

Again, great products from Phase 2.

Quality, price, and lifetime warranty!!!

Will this be fine to use for people that already have Rom tune, PFC, standalone, etc. ?
No need for retune, I'm guessing?

[phase2]

Originally Posted by Dboyizmlg

Again, great products from Phase 2.

Quality, price, and lifetime warranty!!!

Will this be fine to use for people that already have Rom tune, PFC, standalone, etc. ?
No need for retune, I'm guessing?

No need for retune, maximize the ignition performance from your existing setup.

[fatduece]

Wait...so it's $126 for 4 coil packs? I thought it was $126 For one coil pack.

[phase2]

Originally Posted by fatduece

Wait...so it's $126 for 4 coil packs? I thought it was $126 For one coil pack.

Price is a set of 4 pcs.

[fatduece]

Damn that's dirt cheap!

[phase2]

Originally Posted by fatduece

Damn that's dirt cheap!

I guess we should mark it up higher then.

[fatduece]

Haha! Good thing im about to complete my order.

[phase2]

I think your order just came in. We will have it ship out tomorrow, thanks for your support.

[fatduece]

Nice! Thank you for making parts for our old cars.

[phase2]

Originally Posted by fatduece

Nice! Thank you for making parts for our old cars.

More is coming for 2016.

[phase2]

Good bump

Sent from my SM-G928T using Tapatalk

[drumnbasslvr]

what do these ignition coil packs ohm out to as opposed to factory units? any info on dwell you can provide? where are they made? can they take the heat of drifting at 20psi? reviews and knowledge of this parts existence are lacking with its new item status. give us all a warm fuzzy about it and let the product go into back order for popularity sake.

[phase2]

The coil packs were built within the same OHM as stock, however the increased in spark energy and consistency comes within the improved coil pack iron core inside the coil pack. The improvement is consistent spark performance over the weaker factory OEM Nissan coil pack which improves torque and HP power curve.

We've yet to come across any heat issue, but with our life time warranty for P2M products we got you covered if anything goes wrong.

[ProjectPanda13]

Just installed a set of these on my motor
Quality product and looks awesome.
Latez