Wheel fitment whore thread (Stretch/Flush) *NO SPECS, NO POST!*

[CrazyIvan]

Originally Posted by Gabriel25

Ahaaa.. thanks man,
by the way:
Voce e Brasileiro?

No problem...
and to answer your question... Yes, sou brasileiro...

[sblack13]

alright here are my fronts


don't mind the cell phone pics, my digital camera broke =(
17x9+12 had front widebody fenders, but did'nt like the fitment and poor quality so i took em off.
That and the fact I think its loss of profit to run widebody up front and none in rear vice versa.

[20 til 3]

ok, this is the overfender(front and rear) fitment that i'm going with... the wheel specs in this picture are 18x10 ..0 offset up front, and 18x12 +10 in the rear... if i wanted to run 17x9 up front, would i run a -15 offset? and a 18x10 in the rear with a -20? how well would that match up if you guys can help me(i'm ordering ce28's or gtc's) help would be great... i dont want to run spacers btw...

[Bushido]

Offset Calculator to the rescue...

18x10+0 = 17x9-13

18x12+10 = 18x10-15

[20 til 3]

forgot bout that.. sorry

thanks for whippin it up though

[OptionZero]

ce28n does not come in those offsets (1 pc wheel), u could probably order GT-C's in those sizes

as usual call A spec logan

[20 til 3]

Originally Posted by OptionZero

ce28n does not come in those offsets (1 pc wheel), u could probably order GT-C's in those sizes

as usual call A spec logan

only person i would ever go through is logan

i know that 17x9 -0 off.. wouldnt be a problem... but yeah, the rear would be a pain...but i believe the ce28 would come in a 18x12 +10... it'll be a few weeks before i can order neways... but thanks

stand corrected... i guess i'll be going w/o the ce28's lol... thanks again

[OptionZero]

http://www.rayswheels.co.jp/cgi-bin/...odelName=CE28N

No such luck. Rays one pc wheels dont go above 10.5 width

Its not that hard to look up a sizing chart, is it...

[xtreme_s14]

[4] - 18x9.5 +12
Front 225/40/18
Rear 235/40/18

i have the car sitting a lot lower than the picture now.. i could use some advice on tire sizes! it's already rubbing the inner wheel well.. would 35 series fix the problem? raising the ride height is my last resort!

[bigOdom1]

roll/pull the fenders

[Slidin240Wayz]

Originally Posted by bigodom1

roll/pull the fenders

No need to pull..just roll.

[nevaland9]

Originally Posted by xtreme_s14

[4] - 18x9.5 +12
Front 225/40/18
Rear 235/40/18

i have the car sitting a lot lower than the picture now.. i could use some advice on tire sizes! it's already rubbing the inner wheel well.. would 35 series fix the problem? raising the ride height is my last resort!

...spray paint the inside of the fender well, drive around for a day or two and then jack the car up and see where it rubs then pound that shit out like u just got out of prison (minus the premature ejaculation) no mercy.

[Flybert]

If you are this guy below that I quoted or any other guy that doesn't know wheel fitment for shit, please see below.

Originally Posted by 20 til 3

ok, this is the overfender(front and rear) fitment that i'm going with... the wheel specs in this picture are 18x10 ..0 offset up front, and 18x12 +10 in the rear... if i wanted to run 17x9 up front, would i run a -15 offset? and a 18x10 in the rear with a -20? how well would that match up if you guys can help me(i'm ordering ce28's or gtc's) help would be great... i dont want to run spacers btw...

OFFSET/WIDTH/CAMBER/TIRE SIZE/FENDER SIZE are all very important in helping you out. We can't help you unless you list all this stuff.

[genetic]

try hitting the wells up

but if it still rubs, i would do a 35 series.

looks like you're running federals, i had the same problem, but i just hit the wells and they cleared.

good luck!

Originally Posted by xtreme_s14

[4] - 18x9.5 +12
Front 225/40/18
Rear 235/40/18

i have the car sitting a lot lower than the picture now.. i could use some advice on tire sizes! it's already rubbing the inner wheel well.. would 35 series fix the problem? raising the ride height is my last resort!

[ZenkitonS14]

Originally Posted by xtreme_s14

[4] - 18x9.5 +12
Front 225/40/18
Rear 235/40/18

i have the car sitting a lot lower than the picture now.. i could use some advice on tire sizes! it's already rubbing the inner wheel well.. would 35 series fix the problem? raising the ride height is my last resort!

S14s have that stupid hump like thing in the rear, either cut it out and reweld it or HAMMER THE SHIT OUT OF IT until its all flat

[xtreme_s14]

thanks! +1 for the advice.. i'll give it a shot when i get around to it! anybody run 35 series on front and/or rear?

[A'PEXi]

Originally Posted by genetic

try hitting the wells up

but if it still rubs, i would do a 35 series.

looks like you're running federals, i had the same problem, but i just hit the wells and they cleared.

good luck!

any pics of hammered wells?

[sblack13]

i'm pretty sure he's talking about the front. You'll see if you rub, just take a hammer and hammer away!!

[Touge_Monster]

Mine rubbed. I hammered the shit out of it. Then painted it. No its 100% gangster

[TheSquidd]

Originally Posted by nissan240sxkid

old pic, now that i lowered the car it looks a lot better but i can't seem to find any other pics.

front: 17"x9" +15 offset
rear: 17"x10" +12 offset

Yeaaaaaaaaah.



I'm gonna have to go ahead and ask that you not post in this thread until you lower it about 4 inches. Kay? Cool.

Oh, and remember. Next Friday... is Hawaiian shirt day. So, you know, if you want to, go ahead and wear a Hawaiian shirt and jeans.

[smokins14]

hahahaha too funny

[drift freaq]

Originally Posted by A'PEXi

any pics of hammered wells?

17x9+12 Gram light 57' maximum Flat black! 225/45 hammered fronts rolled rears. taken at Falkon240's.
[FLICKR]2056923784[/FLICKR]
[FLICKR]2056923778[/FLICKR]
[FLICKR]2056923788[/FLICKR]

[FaLKoN240]

Nothing crazy, just looks good

Front: 17x9 +12 (5mm spacer) 225/45/17



18x9.5 +12 (No spacer) 225/40/18





When I mounted them, I had to pull the fenders just a tad. I wanna dial some of the camber out for true flushness.

That's gotta do for now. Too broke for an alignment!

[Irukandji]

Looks good Scott,
LESS TIRE SHINE!

[95KA-Turbo]

Originally Posted by Bushido

Offset Calculator to the rescue...

18x10+0 = 17x9-13

18x12+10 = 18x10-15

Wouldn't a 10+0 = a 9 -25 since there are 25mms in an inch? Maybe I'm just not understanding the calculator, but it is saying a 9+3 will be 2mms further out then a 10 +18...which is false, as a 9 +3 fits like a 10 +28, so it should be 10mms further out then the 9 +3, not 2 further in. I'm all sorts of confused.

And to keep the photo thing going...recent shot of my car (17X8-10 and 17X9 +3).

[ayuaddict]

the offset is relative to the center.

there are two sides on either side of a center.

so your first equation is off by 12.5mm.

[Hooorahh!]

Originally Posted by JVD

Ok?...

msg length

ok... means im here


dont mind the girl

but i didnt want to post in here again untill the car is lowered 1 maybe 2 inches in the rear and 2-3 more inches up front
oh and specs are 18x9 +7 and 18x10 -3 rolled and pulled fenders and on tien he coilovers witch i just - cambered as much as i could up front ..

[BobbyDigi]

Been a while....

I come back to Zilvia and now everyone has wheels that were probably once on a widebody gloria

Still not done....

Life is... Fabulous















18x10 -2 rears 18x9 -2 front (not shown)

[Johny5]

did you have any clue what you were doing when you cut your wheel wells? do you have a vagina? this is how high you cut son...




will i need ALL of that? probably not but its damn good to know no tire will EVER rub up in there hahaha. yours is borderline dangerous, go higher and make your arch cut wider

to make this post appropriate...







18x9.5 -2
18x10.5 -6

b*magic "30"mm fronts
chargespeed 50mm rears

no rub except full lock <3

[240sxdave]

shit offset with huge spacers, no fingers any fender.
daily drifted