Nissan Emblem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Nismo240SX · 09-17-2001, 03:40 PM

I need a nissan emblem for the front of my 90 s13. where can i get one, and how much do they cost?

*ca18guy* · 09-17-2001, 03:51 PM

goto http://www.courtesyparts.com shot them an email asking them for the part, they should help you out. Or try a junk yard.

*LanceS13* · 09-17-2001, 05:22 PM

You could probably get one pretty cheap at a junk yard.  If I were already ready to paint my car, I'd send you mine for free 'cause it's getting shaved...but that won't be until probably around January.

Nismo240SX · 09-17-2001, 07:39 PM

yo man, i can wait... my car won't be getting painted until next summer. by then hopefully i'll have enough bread to order some stuff off of Bomex and some decent wheels.

*LanceS13* · 09-17-2001, 08:06 PM

Well...if all goes to plan, I'll have enough money to paint it by Christmas.  If you still need it then send me an email or something.  I would ask that you pay shipping, however.  If the decal can be had for fairly cheap, it might not be worth it.

wav399 · 09-18-2001, 03:46 AM

I want to remove mine.  how do you remove it and what will be left (holes) ?

96SEChick · 09-18-2001, 06:01 AM

One thing to consider if you're looking for an emblem from a junk yard.  It will be somewhat difficult to remove, and if the car's been sitting in the sun for a while, the emblem may break while trying to remove it.  And you will also have to clean the adhesive off the back of it.  A new emblem through the body shop is going to cost me $18 for my S14.  I would just buy a new one and not have to worry about it being faded, scratched or take the chances on breaking it while trying to remove it from a salvaged car.

Just my .02

*LanceS13* · 09-18-2001, 09:53 AM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from wav399 on 4:46 am on Sep. 18, 2001
I want to remove mine. how do you remove it and what will be left (holes) ?
</td></tr></table><span id='postcolor'>
On the S13, the front emblem is held in place by a little bolt and nut.  It's in a pretty awkward position to get to.  It should leave one small hole that could be filled in with a little body filler or something.

09-18-2001, 03:03 PM

s14, its just stuck on.  just use a heat lamp and some dental floss.  stay away from chisels, etc.

09-18-2001, 03:32 PM

JUNK YARD

wav399 · 09-18-2001, 06:35 PM

Anybody replace the original nissan emblem with the "S" shield thing for the Silvia?

09-19-2001, 07:29 AM

My boyfriend did it to his 240, and it fits right in and it's awesome. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

*Grant* · 09-19-2001, 10:48 AM

i fu just want a normal nissan hood emblem, i got one, you can have it. I replaced mine with the silvia shield

*Grant* · 09-19-2001, 10:50 AM

The sheild just looks much better IMO, by the way Nismo240sx, I have an S14, so you may have to glue the logo on.

wav399 · 09-19-2001, 02:38 PM

So you guys are saying the shield fits in to the place where the regular nissan emblem is, without any problems on a 93 240SX?

09-19-2001, 02:53 PM

Umm... the shields are for S14s and 15s. You've got an S13. I wouldn't suggest the shield. My 2 pennies.

09-17-2001, 03:40 PM	#1
Nismo240SX Zilvia Addict Join Date: Sep 2001 Location: Marion, Virginia. Age: 38 Posts: 855 Trader Rating: (0) Feedback Score: 0 reviews	I need a nissan emblem for the front of my 90 s13. where can i get one, and how much do they cost?

09-17-2001, 03:51 PM	#2
ca18guy Premium Member Join Date: Jul 2001 Location: Clearwater FL Age: 41 Posts: 3,226 Trader Rating: (0) Rides Gallery: ca18guy Feedback Score: 0 reviews	goto http://www.courtesyparts.com shot them an email asking them for the part, they should help you out. Or try a junk yard.

09-17-2001, 05:22 PM	#3
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 42 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	You could probably get one pretty cheap at a junk yard.  If I were already ready to paint my car, I'd send you mine for free 'cause it's getting shaved...but that won't be until probably around January.

09-17-2001, 07:39 PM	#4
Nismo240SX Zilvia Addict Join Date: Sep 2001 Location: Marion, Virginia. Age: 38 Posts: 855 Trader Rating: (0) Feedback Score: 0 reviews	yo man, i can wait... my car won't be getting painted until next summer. by then hopefully i'll have enough bread to order some stuff off of Bomex and some decent wheels.

09-17-2001, 08:06 PM	#5
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 42 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	Well...if all goes to plan, I'll have enough money to paint it by Christmas.  If you still need it then send me an email or something.  I would ask that you pay shipping, however.  If the decal can be had for fairly cheap, it might not be worth it.

09-18-2001, 03:46 AM	#6
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	I want to remove mine.  how do you remove it and what will be left (holes) ?

09-18-2001, 06:01 AM	#7
96SEChick Nissanaholic! Join Date: Jun 2001 Location: Broken Arrow, OK Age: 47 Posts: 1,814 Trader Rating: (0) Feedback Score: 0 reviews	One thing to consider if you're looking for an emblem from a junk yard.  It will be somewhat difficult to remove, and if the car's been sitting in the sun for a while, the emblem may break while trying to remove it.  And you will also have to clean the adhesive off the back of it.  A new emblem through the body shop is going to cost me $18 for my S14.  I would just buy a new one and not have to worry about it being faded, scratched or take the chances on breaking it while trying to remove it from a salvaged car. Just my .02

09-18-2001, 09:53 AM	#8
LanceS13 AutoX Junkie Join Date: Jun 2001 Location: MS Age: 42 Posts: 2,044 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote </td></tr><tr><td id="QUOTE">Quote: from wav399 on 4:46 am on Sep. 18, 2001 I want to remove mine. how do you remove it and what will be left (holes) ? </td></tr></table><span id='postcolor'> On the S13, the front emblem is held in place by a little bolt and nut.  It's in a pretty awkward position to get to.  It should leave one small hole that could be filled in with a little body filler or something.

09-18-2001, 03:03 PM	#9
Guest Posts: n/a	s14, its just stuck on.  just use a heat lamp and some dental floss.  stay away from chisels, etc.

09-18-2001, 06:35 PM	#11
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	Anybody replace the original nissan emblem with the "S" shield thing for the Silvia?

09-19-2001, 07:29 AM	#12
Guest Posts: n/a	My boyfriend did it to his 240, and it fits right in and it's awesome. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

09-19-2001, 10:48 AM	#13
Grant Premium Member Join Date: Jun 2001 Location: 聖地牙哥 Posts: 2,647 Trader Rating: (0) Rides Gallery: Grant Feedback Score: 0 reviews	i fu just want a normal nissan hood emblem, i got one, you can have it. I replaced mine with the silvia shield

09-19-2001, 10:50 AM	#14
Grant Premium Member Join Date: Jun 2001 Location: 聖地牙哥 Posts: 2,647 Trader Rating: (0) Rides Gallery: Grant Feedback Score: 0 reviews	The sheild just looks much better IMO, by the way Nismo240sx, I have an S14, so you may have to glue the logo on.

09-19-2001, 02:38 PM	#15
wav399 Zilvia Member Join Date: Jun 2001 Posts: 196 Trader Rating: (0) Feedback Score: 0 reviews	So you guys are saying the shield fits in to the place where the regular nissan emblem is, without any problems on a 93 240SX?

09-19-2001, 02:53 PM	#16
Guest Posts: n/a	Umm... the shields are for S14s and 15s. You've got an S13. I wouldn't suggest the shield. My 2 pennies.