Ball Bearing Turbo Rebuild Kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JDS Performance · 06-02-2013, 06:56 AM

JDSPerformanceTurbos.com
JDS-Performance-Parts.com

NOT A GARRETT/PRECISION OR HKS PRODUCT!!!

[email protected]

///ON SALE FOR LIMITED TIME///

$265 shipped or $250 picked up

Concord, NC 28025

Pull those old door stops up off the floor and get them boosting again!

Finally a
Ball Bearing Turbo Rebuild Kit

Will fit;
GT25R, GT28R, GT30R, and GT35R Series TURBOS

///Ask about piston ring (oil seal) kits - for those leaky turbos that don't need a full rebuild///

///KIT WILL COME WITH MY BALL BEARING TURBO REBUILD DVD///

SO YOU CAN REBUILD YOUR TURBO YOURSELF!

You will have to get your CHRA balanced after the install.

Be sure to check the oil hole on your oil restrictor to be sure its the same as the one supplied in this kit - if not you will need to reuse your oil restrictor.

Also be sure to run a screw in oil restrictor if your application requires it...if you have any questions on this check Garrett's website they have all the detail you would need to know.

Rebuilding a Ball Bearing Turbo is alot more involved than a Journal Bearing Turbo so if you do not have the patients I recommend getting a pro to do the rebuild! Also more special tools are needed verses the journal bearing turbos.

We charge $135 dollars labor for the rebuild - that does not included a balance in that price!

JDS Performance · 06-02-2013, 07:02 AM

I also have a few turbos I am rebuilding if interested LMK

T25 SR20DET Journal Bearing Turbo
GT2560R - T28 Ball Bearing S14 Turbo
GT2560R - T28 Ball Bearing S15 Turbo
GT2560 - T28 S15 Journal Bearing Turbo
GT2860RS - Disco Potato - Ball Bearing Turbo
GT2871R - Ball Bearing Turbo
GT3582R - Ball Bearing Turbo
Precision 6152E-MFS - basiaclly a GT35 journal bearing turbo with slightly different size wheels
HKS GT2510 - Ball Bearing Turbo

JDS Performance · 06-29-2013, 04:30 PM

bumpping this

heychris · 06-30-2013, 02:01 AM

Do you have a Garrett T3/T4 journal to full ball bearing rebuild/upgrade kit?

TIA,

Ch

Sent using XT912 M

Fricshon · 06-30-2013, 03:45 AM

do you do rebuilds on rb25 turbos?

JDS Performance · 06-30-2013, 05:53 AM

Quote:

Originally Posted by heychris

Do you have a Garrett T3/T4 journal to full ball bearing rebuild/upgrade kit?

TIA,

Ch

Sent using XT912 M

Sorry it is not possible to make a journal bearing turbo into a bb turbo

JDS Performance · 06-30-2013, 05:54 AM

Quote:

Originally Posted by Fricshon

do you do rebuilds on rb25 turbos?

Sorry they are rebuildable

JDS Performance · 11-12-2013, 08:06 PM

These kits are for the gtx models too

TheRealSy90 · 11-12-2013, 09:20 PM

How much is balancing?

Sent from my iPhone using Tapatalk

JDS Performance · 11-13-2013, 03:23 AM

Quote:

Originally Posted by TheRealSy90

How much is balancing?

Sent from my iPhone using Tapatalk

$50 plus shipping

Danger_Dorn · 11-13-2013, 04:12 AM

Price on a rebuilt gt2871r or other turbos? Or even blown turbo's with a diy rebuild kit so price minus labor

oj5joker · 11-13-2013, 08:04 AM

Is there any chance you have a rebuild kit for a Turbonetics t3/t4/to4 journal bearing types?

JDS Performance · 11-13-2013, 12:14 PM

Quote:

Originally Posted by Danger_Dorn

Price on a rebuilt gt2871r or other turbos? Or even blown turbo's with a diy rebuild kit so price minus labor

My labor is $135
Thanks kits are above which come with my rebuild dvd
I have a rebuilt gt2871r with billet wheel 52trim in fs section... basically like new. . Check my listings
I have a few blown turbos
Please email me I don't want to break any form rules
[email protected]

JDS Performance · 11-13-2013, 12:14 PM

Quote:

Originally Posted by oj5joker

Is there any chance you have a rebuild kit for a Turbonetics t3/t4/to4 journal bearing types?

Yes I do please email me [email protected]

JDS Performance · 11-22-2013, 08:06 PM

I can offer great package deals on ball bearing rebuild kits with new turbine wheels, compressor wheels (stock or billet). Build those bad boys up!

JDS Performance · 11-22-2013, 08:07 PM

If you just need piston rings (oil seals) - due to smoking and blowing oil - I sell those kits as well...LMK

***dorkidori_s13*** · 11-24-2013, 02:31 PM

Your thread has been moved to the appropriate section. I understand you are a paid vendor, but that is no excuse for neglect of forum rules!

AaronCrowder · 07-06-2016, 11:32 AM

Need a stock s15 turbo. 901-569-7859

06-02-2013, 06:56 AM	#1
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	Ball Bearing Turbo Rebuild Kit JDSPerformanceTurbos.com JDS-Performance-Parts.com NOT A GARRETT/PRECISION OR HKS PRODUCT!!! [email protected] ///ON SALE FOR LIMITED TIME/// $265 shipped or $250 picked up Concord, NC 28025 Pull those old door stops up off the floor and get them boosting again! Finally a Ball Bearing Turbo Rebuild Kit Will fit; GT25R, GT28R, GT30R, and GT35R Series TURBOS ///Ask about piston ring (oil seal) kits - for those leaky turbos that don't need a full rebuild/// ///KIT WILL COME WITH MY BALL BEARING TURBO REBUILD DVD/// SO YOU CAN REBUILD YOUR TURBO YOURSELF! You will have to get your CHRA balanced after the install. Be sure to check the oil hole on your oil restrictor to be sure its the same as the one supplied in this kit - if not you will need to reuse your oil restrictor. Also be sure to run a screw in oil restrictor if your application requires it...if you have any questions on this check Garrett's website they have all the detail you would need to know. Rebuilding a Ball Bearing Turbo is alot more involved than a Journal Bearing Turbo so if you do not have the patients I recommend getting a pro to do the rebuild! Also more special tools are needed verses the journal bearing turbos. We charge $135 dollars labor for the rebuild - that does not included a balance in that price! __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com Last edited by JDS Performance; 04-17-2015 at 09:49 AM..

06-02-2013, 07:02 AM	#2
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	I also have a few turbos I am rebuilding if interested LMK T25 SR20DET Journal Bearing Turbo GT2560R - T28 Ball Bearing S14 Turbo GT2560R - T28 Ball Bearing S15 Turbo GT2560 - T28 S15 Journal Bearing Turbo GT2860RS - Disco Potato - Ball Bearing Turbo GT2871R - Ball Bearing Turbo GT3582R - Ball Bearing Turbo Precision 6152E-MFS - basiaclly a GT35 journal bearing turbo with slightly different size wheels HKS GT2510 - Ball Bearing Turbo __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com Last edited by JDS Performance; 11-13-2013 at 12:16 PM..

06-29-2013, 04:30 PM	#3
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	bumpping this __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com

11-12-2013, 08:06 PM	#8
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	These kits are for the gtx models too __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com

11-13-2013, 08:04 AM	#12
oj5joker Leaky Injector Join Date: Jan 2013 Location: FL Posts: 66 Trader Rating: (1) Feedback Score: 1 reviews	Is there any chance you have a rebuild kit for a Turbonetics t3/t4/to4 journal bearing types? Last edited by oj5joker; 11-13-2013 at 08:05 AM.. Reason: added

06-30-2013, 02:01 AM	#4
heychris Zilvia Addict Join Date: Oct 2007 Location: SkiTown USA Posts: 760 Trader Rating: (20) Feedback Score: 20 reviews	Do you have a Garrett T3/T4 journal to full ball bearing rebuild/upgrade kit? TIA, Ch Sent using XT912 M

06-30-2013, 03:45 AM	#5
Fricshon Leaky Injector Join Date: Oct 2007 Location: Humboldt Age: 39 Posts: 98 Trader Rating: (2) Feedback Score: 2 reviews	do you do rebuilds on rb25 turbos?

11-13-2013, 04:12 AM	#11
Danger_Dorn Zilvia Member Join Date: Oct 2012 Location: Jacksonville NC Age: 32 Posts: 265 Trader Rating: (0) Feedback Score: 0 reviews	Price on a rebuilt gt2871r or other turbos? Or even blown turbo's with a diy rebuild kit so price minus labor

11-22-2013, 08:06 PM	#15
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	I can offer great package deals on ball bearing rebuild kits with new turbine wheels, compressor wheels (stock or billet). Build those bad boys up! __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com

11-22-2013, 08:07 PM	#16
JDS Performance Zilvia.net Advertiser Join Date: Jul 2006 Location: Concord, NC Posts: 3,127 Trader Rating: (53) Feedback Score: 53 reviews	If you just need piston rings (oil seals) - due to smoking and blowing oil - I sell those kits as well...LMK __________________ http://www.240SXTECHDVDS.org http://www.JDSPerformanceTurbos.com

11-24-2013, 02:31 PM	#17
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 42 Posts: 7,488 Trader Rating: (41) Feedback Score: 41 reviews	Your thread has been moved to the appropriate section. I understand you are a paid vendor, but that is no excuse for neglect of forum rules! __________________ Check out my IG for what I'm up to! DORKIDORI INSTAGRAM!!!

07-06-2016, 11:32 AM	#18
AaronCrowder Join Date: Jun 2015 Location: Memphis, TN Age: 30 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	Need a stock s15 turbo. 901-569-7859