The Sr20/Sr22vet thread

[brndck]

/\/\/\ ah gotcha. the one on the underside of the head, we tapped and inserted an allen head plug in that one too. You're right though, a good head gasket should have the same effect as plugging it.

[japslapsilvia]

Originally Posted by jr_ss

I think he's referring to the oil feed port in the block further forward on the head/deck. You do not need to block the port on the underside of the head. I didn't plug my VTC port on my S14 bottomend either. A good head gasket and studs will work just fine. If you're absolutely worried about it, then yes, plug it for piece of mind.

Originally Posted by brndck

/\/\/\ ah gotcha. the one on the underside of the head, we tapped and inserted an allen head plug in that one too. You're right though, a good head gasket should have the same effect as plugging it.

Yes the one on the underside of the head. I will just go ahead and plug it for piece of mind


Thanks fellas!!!