Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

WhiteS13 · 02-07-2002, 09:23 AM

There's a Momo finisher piece that you can get which screws onto the bottom of the knob. It has a ring on the bottom where you can slip the momo boot on and eliminate that gap.

Momo makes 2 universal boots.  One is longer.

I had one on my Prelude because I couldn't bear with the gap. Got rid of the knob and boot, and replaced it with a Integra Type-R titanium shifter and factory leather boot with red stitching instead. It gets cold, but I don't drive the car in the winter anyways.

(Edited by WhiteS13 at 4:41 am on Feb. 7, 2002)

02-07-2002, 09:23 AM	#6
WhiteS13 Leaky Injector Join Date: Jan 2002 Posts: 73 Trader Rating: (0)	There's a Momo finisher piece that you can get which screws onto the bottom of the knob. It has a ring on the bottom where you can slip the momo boot on and eliminate that gap. Momo makes 2 universal boots.  One is longer. I had one on my Prelude because I couldn't bear with the gap. Got rid of the knob and boot, and replaced it with a Integra Type-R titanium shifter and factory leather boot with red stitching instead. It gets cold, but I don't drive the car in the winter anyways. (Edited by WhiteS13 at 4:41 am on Feb. 7, 2002)