Quote:
Originally Posted by HPballer76
maybe im just really tired but didn't you just answer your own question?? you said that the green and yellow need to go to the rpm signal and ignition wire then you say you hooked them to the rpm signal and cas. wouldn't that be the problem??
|
the bee r website says to hook the wires into the cas 180 and cas 1 degree wires. i guess the cas 180 throws out an rpm code and the cas 1 degree wire acts as a ignition wire cause if the ecu doesnt read cas readings the ignition wont fire. i just was hoping i made some stupid mistake wiring i t up.