Quote:
Originally Posted by awilliwonka91
i wired the fuel pump into a switch and it primes, but still only cranks. Checked my injectors and i'm not getting any power. Checked all of my grounds once again, and the ignition switch, and all of the connections, fuses, ect. Could this be an ecu problem? I can't tell if the ecu comes on because whoever had this before me removed the light, and the reset switch on the ecu. I looked into the ecu and theres no signs of anything being fried, or anything. I checked the orange wire coming into the dash (starter switch?) on the brown connector and no power. I'm guessing somehow the ecu took a dump in between the swap?
|
S14SR's dont have a LED or reset switch. Is your ecu plugged and bolted in securely? Do you have good grounds?
Edit, nvm just saw you switched lines. That would be the problem.