Quote:
Originally Posted by Iconoclast
When probing the wires.. they all read 4.95v.. shouldn't one read 5, one .5 and the other, nothing?
Ohm testing: new sensor 1.6k open 5k closed
old sensor 5k open 13.3k closed .. the old one is garbage, right?
|
You are not going to ohm test it..
Black probe on the MM goes into the Ground via the TPS (black wire).
Now, your TPS should read .4-.5v idle and 4.0 - 4.5v WOT. This is with the TPS connected.
Here:
https://www.youtube.com/watch?v=rKK7QdochkI