TPS Help

[2.5T_/<ouki]

Originally Posted by Iconoclast

When probing the wires.. they all read 4.95v.. shouldn't one read 5, one .5 and the other, nothing?

Ohm testing: new sensor 1.6k open 5k closed
old sensor 5k open 13.3k closed .. the old one is garbage, right?

You are not going to ohm test it..

Black probe on the MM goes into the Ground via the TPS (black wire).

Now, your TPS should read .4-.5v idle and 4.0 - 4.5v WOT. This is with the TPS connected.

Here:
https://www.youtube.com/watch?v=rKK7QdochkI