Quote:
Originally posted by stuntman240
The other thing is that when it would only go into 5th I could take it out of 5th and into N but only N right below 5th, if that makes any sense. I couldnt move the shifter side to side, only front to back into 5th or into N right below 5th.
|
The wave washer (spring) could be messed up down where the fulcrum ball sits in the tranny case. You'll have to take apart some things to check that...
Quote:
|
As for it not going into R I know that sometimes you have to let the clucth out a touch to get it to slip in, and yes I know about the lockout, it was hitting the lockout, and no matter what I did I couldnt get around it, shifted into every gear and then tried R, nothing, shift into 4th then to R, nothing etc.... so I dont know what is wrong.
|
Your shift fork could be bent/binding/ready to break. Not sure. I would get this checked out professionally. Also, if the clutch is not fully disengaging (like if your slave cylinder is bad), all sorts of weird shifting problems can occur.
Eric