Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Champster · 07-17-2003, 11:34 AM

I'm prep'ing for a turbo by HKS next year. Within the next 3 weeks I will have installed a HKS Exhaust system, Greddy Headers, and Ingen Cold Air Intake on my stock 97 240SX SE.
I want to start the ground work for advanced mods.

I am looking to add these to my ride, let me know what you think.

1. HKS SR20DET Exhaust Camshaft
2. HKS DOWNPIPE (Decided against after reading one of the threads here)
3. Forged Pistons
4. Pulley Kits by Unorthodox @ modacar.com
5. Greddy Valve Springs
(I pulled these parts from http://shop.store.yahoo.com/phase2mo...arsr20det.html

Also is it possible to add some SR20DET parts to a KA engine as the ones mentioned above?

07-17-2003, 11:34 AM	#1
Champster Leaky Injector Join Date: Apr 2003 Location: DTOWN (Littleton) Posts: 105 Trader Rating: (0)	Prep'ing for turbo questions I'm prep'ing for a turbo by HKS next year. Within the next 3 weeks I will have installed a HKS Exhaust system, Greddy Headers, and Ingen Cold Air Intake on my stock 97 240SX SE. I want to start the ground work for advanced mods. I am looking to add these to my ride, let me know what you think. 1. HKS SR20DET Exhaust Camshaft 2. HKS DOWNPIPE (Decided against after reading one of the threads here) 3. Forged Pistons 4. Pulley Kits by Unorthodox @ modacar.com 5. Greddy Valve Springs (I pulled these parts from http://shop.store.yahoo.com/phase2mo...arsr20det.html Also is it possible to add some SR20DET parts to a KA engine as the ones mentioned above?