Quote:
Originally Posted by slowvia
The cheapest way to do it is to buy a pair of z32 rears and just redrill the front hubs (yes it can be done). But if you do decide to buy some aftermarket hubs make sure you swap your old bearings (after re-greasing them obviously) into the new ones. As far as I know the bearings are the problem in those aftermarket dealios.
Or dont, its your decision.
|
I dont really see how a hub could fail.. the bearing obviously could. if i were going to buy these i would just run them with the noname bearings till/when they get dead, then just press in my old oem ones..