5 lug hubs from ebay

[EhrikETFG]

Originally Posted by slowvia

The cheapest way to do it is to buy a pair of z32 rears and just redrill the front hubs (yes it can be done). But if you do decide to buy some aftermarket hubs make sure you swap your old bearings (after re-greasing them obviously) into the new ones. As far as I know the bearings are the problem in those aftermarket dealios.
Or dont, its your decision.

I dont really see how a hub could fail.. the bearing obviously could. if i were going to buy these i would just run them with the noname bearings till/when they get dead, then just press in my old oem ones..

[va240dude]

Originally Posted by chiboy002

it is. the ONLY aftermarket hubs i would ever buy new is Attain

this
hell, even my stock bearings were quieter than the ichiba trash, and they have like 200k+ on them

i can't complain though, i knew what i was buying

Yeah I can get attains here in Japan but they are pricey.

Originally Posted by EhrikETFG

I dont really see how a hub could fail.. the bearing obviously could. if i were going to buy these i would just run them with the noname bearings till/when they get dead, then just press in my old oem ones..

Yeah I have more faith in the hub than the wheel studs or bearing. Seems like there are enough people running aftermarket hubs with no problems except the bearings. I'm going to run mine until the bearings go and replace them with oem goodness