Quote:
Originally Posted by Def
Do they seal with an o-ring? In which case they are almost surely -6 AN o-ring boss fittings. A normal -6 AN flared fitting will work fine with an o-ring as long as there is enough depth for the flare to sit inside the rail and still bottom out the o-ring.
What you actually want is something like this:
http://www.summitracing.com/parts/sum-220756/overview/
That's a push lock type hose end, so once the hose goes on you'll likely have to cut it off. Use an o-ring on the male AN part. |
So this will work? Same part number, just from ebay.
http://www.ebay.com/itm/Summit-22075...95e493&vxp=mtr
Can you guarantee that it'll work? Everything is so damn vague with AN fittings. I've been told I have a -6AN male/male fitting that came with the fail but one side is clearly larger than the other. The fitting in the picture looks like the smaller male side of the male/male fitting which doesn't fit into the rail