SR20DET circuit sport top feed rail frustration - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Def · 02-28-2014, 02:58 PM

Do they seal with an o-ring? In which case they are almost surely -6 AN o-ring boss fittings. A normal -6 AN flared fitting will work fine with an o-ring as long as there is enough depth for the flare to sit inside the rail and still bottom out the o-ring.

What you actually want is something like this:

http://www.summitracing.com/parts/sum-220756/overview/

That's a push lock type hose end, so once the hose goes on you'll likely have to cut it off. Use an o-ring on the male AN part.

02-28-2014, 02:58 PM	#4
Def Post Whore! Join Date: Apr 2004 Location: Houston, TX Posts: 2,701 Trader Rating: (16) Feedback Score: 16 reviews	Do they seal with an o-ring? In which case they are almost surely -6 AN o-ring boss fittings. A normal -6 AN flared fitting will work fine with an o-ring as long as there is enough depth for the flare to sit inside the rail and still bottom out the o-ring. What you actually want is something like this: http://www.summitracing.com/parts/sum-220756/overview/ That's a push lock type hose end, so once the hose goes on you'll likely have to cut it off. Use an o-ring on the male AN part. __________________ S13 Hatch - Goes around tracks quickly DEFSPORT