s13 SR into s14 chassis FMIC question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14kouki_ · 05-19-2008, 12:03 PM

well i have a s13 blacktop in my kouki and i was looking at buying a generic fmic kit, but they have two available. one for a s13 chassis and one for a s14 chassis. my question is, since i have a s13 sr in a s14, which one will i need to get to work properly without major modification if any at all? any help would be greatly appreciated, thanks a lot!

adictd2b00st · 05-19-2008, 12:08 PM

s13 will fit better...... its easier to work with just changing the mounting of the core than actual piping being wrong if you got the s14 kit

rican_nick · 05-19-2008, 01:13 PM

u want to match the motor. s14 front mounts will have the blow off valve stem along with the AICV. The BOV port will need to be blocked off.

s13 piping will work better.

I have the same thing you do..Kouki with s13 Blacktop.

i am using my HKS Type S from when i had my s13's. I had to do some trimming and such of the ends of the frame rail, but i actually got it to mount up using all the s13 brackets on the kouki.

hustlervibes · 05-19-2008, 01:19 PM

S13 FMIC. We had to deal with this on a friends car recently.

The throttle body locations are the main difference and you'll need the S13 one for it to bolt up right.

Slidin240Wayz · 05-19-2008, 01:21 PM

Match the motor.

LOCK THIS THREAD

*exitspeed* · 05-19-2008, 01:23 PM

Questions has been answered and could have been answered by a simple search.

05-19-2008, 12:03 PM	#1
s14kouki_ Leaky Injector Join Date: Mar 2008 Location: 310 Posts: 137 Trader Rating: (0) Feedback Score: 0 reviews	s13 SR into s14 chassis FMIC question well i have a s13 blacktop in my kouki and i was looking at buying a generic fmic kit, but they have two available. one for a s13 chassis and one for a s14 chassis. my question is, since i have a s13 sr in a s14, which one will i need to get to work properly without major modification if any at all? any help would be greatly appreciated, thanks a lot!

05-19-2008, 01:13 PM	#3
rican_nick Zilvia FREAK! Join Date: May 2003 Location: Augusta, GA Age: 42 Posts: 1,204 Trader Rating: (0) Feedback Score: 0 reviews	u want to match the motor. s14 front mounts will have the blow off valve stem along with the AICV. The BOV port will need to be blocked off. s13 piping will work better. I have the same thing you do..Kouki with s13 Blacktop. i am using my HKS Type S from when i had my s13's. I had to do some trimming and such of the ends of the frame rail, but i actually got it to mount up using all the s13 brackets on the kouki. __________________ Nick O. 97 240sx My Seller's Review Thread

05-19-2008, 01:21 PM	#5
Slidin240Wayz Post Whore! Join Date: Jan 2005 Location: Everywhere Age: 40 Posts: 5,427 Trader Rating: (9) Feedback Score: 9 reviews	Match the motor. LOCK THIS THREAD __________________ Support Zilvia by purchasing a sticker!

05-19-2008, 01:23 PM	#6
exitspeed aWingThing.com Join Date: Mar 2003 Location: Milwaukee, WI Age: 45 Posts: 20,900 Trader Rating: (1) Feedback Score: 1 reviews	Questions has been answered and could have been answered by a simple search. __________________ What I do for a living...www.mhrussell.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-19-2008, 12:08 PM	#2
adictd2b00st Zilvia Addict Join Date: May 2003 Location: OH Age: 43 Posts: 695 Trader Rating: (4) Feedback Score: 4 reviews	s13 will fit better...... its easier to work with just changing the mounting of the core than actual piping being wrong if you got the s14 kit

05-19-2008, 01:19 PM	#4
hustlervibes Banned from the Marketplace Join Date: May 2006 Location: Southern California Rep Power: ∞ Age: 36 Posts: 2,453 Trader Rating: (0) Feedback Score: 0 reviews	S13 FMIC. We had to deal with this on a friends car recently. The throttle body locations are the main difference and you'll need the S13 one for it to bolt up right.