kouki projector adjustment - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ChingSR20 · 10-10-2007, 03:21 AM

I just put hids on my 97 kouki 240 and the projectors are aiming down. I was wondering if anyone can show me where the adjustment screws are, my cheltons book it only shows for the zenki... thanks alot

Sir · 10-10-2007, 09:23 AM

on the headlight there are 2 philips screws that you turn to aim
one is left/right
second is up/down

devonkyle77 · 10-10-2007, 09:25 AM

are you sure they arent 8 or 10mm hex screws?

tukn9s · 10-10-2007, 09:25 AM

Look down on the lights, there is a adjustor knob on the lights, use like an 8mm wrench, that for up and down.

lucky7 · 10-10-2007, 10:48 AM

i think you're both right. 1 is 8mm, and the other is 10mm. its been a couple months since ive messed with mine though.

chuy · 10-10-2007, 05:38 PM

also you can fine tune it by using the clear knobs

ChingSR20 · 10-10-2007, 08:48 PM

thanks alot guys i'll try it when i get off from work.

ChingSR20 · 10-10-2007, 11:54 PM

thanks alot they were both a 8

tukn9s · 10-11-2007, 08:44 AM

Glad I could help.

10-10-2007, 03:21 AM	#1
ChingSR20 Leaky Injector Join Date: Aug 2006 Location: Guam Age: 39 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	kouki projector adjustment I just put hids on my 97 kouki 240 and the projectors are aiming down. I was wondering if anyone can show me where the adjustment screws are, my cheltons book it only shows for the zenki... thanks alot

10-10-2007, 09:25 AM	#3
devonkyle77 Post Whore! Join Date: Sep 2003 Location: md Age: 41 Posts: 3,091 Trader Rating: (3) Rides Gallery: devonkyle77 Feedback Score: 3 reviews	are you sure they arent 8 or 10mm hex screws? __________________ WTB-NARDI wheel & NRG 2.8 QR

10-10-2007, 10:48 AM	#5
lucky7 Post Whore! Join Date: Mar 2005 Location: Oakland (OT) Michigan Age: 40 Posts: 3,353 Trader Rating: (0) Rides Gallery: lucky7 Feedback Score: 0 reviews	i think you're both right. 1 is 8mm, and the other is 10mm. its been a couple months since ive messed with mine though. __________________ -Dane

10-10-2007, 05:38 PM	#6
chuy Zilvia Addict Join Date: Mar 2003 Location: Colorado some where Age: 48 Posts: 623 Trader Rating: (2) Feedback Score: 2 reviews	also you can fine tune it by using the clear knobs __________________ Slide Happy

10-10-2007, 09:25 AM	#4
tukn9s Leaky Injector Join Date: Mar 2007 Location: mn Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Look down on the lights, there is a adjustor knob on the lights, use like an 8mm wrench, that for up and down.

10-10-2007, 08:48 PM	#7
ChingSR20 Leaky Injector Join Date: Aug 2006 Location: Guam Age: 39 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	thanks alot guys i'll try it when i get off from work.

10-10-2007, 11:54 PM	#8
ChingSR20 Leaky Injector Join Date: Aug 2006 Location: Guam Age: 39 Posts: 65 Trader Rating: (0) Feedback Score: 0 reviews	thanks alot they were both a 8

10-11-2007, 08:44 AM	#9
tukn9s Leaky Injector Join Date: Mar 2007 Location: mn Posts: 98 Trader Rating: (1) Feedback Score: 1 reviews	Glad I could help.