adjusting suspension to fit 17x9.5 wheels - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

khilgers · 01-19-2007, 03:19 PM

I am in the market for a set of wheels for my S14. One question I have though is how much adjustment will I have with my stock suspension?

I was planning on getting a set of 17x9.5 +12 but with only KTS coilovers, how well am I going to be able to adjust my camber and toe to accomidate the wider, low offset wheels.

The specs would be:

17x9.5 +12
235/40/17 tires
Z32 front brakes
KTS coilovers
F/R fenders rolled

OptionZero · 01-19-2007, 06:46 PM

stock suspension? good luck in the rear man, i used -3.5 to fit 17x9.5 +17 and i have full rear multilink

you're going to need RUCAs as the minimum

oh, and ride height matters, if you wanna go superlow...time for fender mods

khilgers · 01-19-2007, 07:06 PM

I know with my KTS coilovers that I can adjust the camber up front, but I was worried about the rear suspension. I'm assuming you can adjust camber a little with stock RUCA's but would it be enough to fit the +12's? As for fender mods I already did a roll on the front and rears, but now it looks like I either need to go the pussy route and go with a higher offest, or order up some RUCA's. Hmmmmm, which way to go......RUCA's.

OptionZero · 01-19-2007, 07:44 PM

hell fucking no

IIRC stock suspension lets you adjust less than 1 degree

dont get a higher offset, just get your fenders rolled and get some RUCAs

the zilvia way is to buy wheels and then make them fit

Slidin240Wayz · 01-19-2007, 08:24 PM

Quote:

Originally Posted by OptionZero

the zilvia way is to buy wheels and then make them fit

THE TROOF!

Carlos

01-19-2007, 03:19 PM	#1
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 44 Posts: 893 Trader Rating: (0) Rides Gallery: khilgers Feedback Score: 0 reviews	adjusting suspension to fit 17x9.5 wheels I am in the market for a set of wheels for my S14. One question I have though is how much adjustment will I have with my stock suspension? I was planning on getting a set of 17x9.5 +12 but with only KTS coilovers, how well am I going to be able to adjust my camber and toe to accomidate the wider, low offset wheels. The specs would be: 17x9.5 +12 235/40/17 tires Z32 front brakes KTS coilovers F/R fenders rolled

01-19-2007, 06:46 PM	#2
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 41 Posts: 6,263 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	stock suspension? good luck in the rear man, i used -3.5 to fit 17x9.5 +17 and i have full rear multilink you're going to need RUCAs as the minimum oh, and ride height matters, if you wanna go superlow...time for fender mods

01-19-2007, 07:06 PM	#3
khilgers Zilvia Addict Join Date: Oct 2005 Location: Twin Cities Age: 44 Posts: 893 Trader Rating: (0) Rides Gallery: khilgers Feedback Score: 0 reviews	I know with my KTS coilovers that I can adjust the camber up front, but I was worried about the rear suspension. I'm assuming you can adjust camber a little with stock RUCA's but would it be enough to fit the +12's? As for fender mods I already did a roll on the front and rears, but now it looks like I either need to go the pussy route and go with a higher offest, or order up some RUCA's. Hmmmmm, which way to go......RUCA's.

01-19-2007, 07:44 PM	#4
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 41 Posts: 6,263 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	hell fucking no IIRC stock suspension lets you adjust less than 1 degree dont get a higher offset, just get your fenders rolled and get some RUCAs the zilvia way is to buy wheels and then make them fit