SR Clutch Flywheel Problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

iv196 · 01-15-2008, 12:07 PM

I have an SR with a stock clutch rite now. I bought, not one but 2 Stage 2 clutches for it and both of them did not work. At first i thot i bought the wrong one or the company made a mistake but none of them work. My flywheel is smaller than the one needed for my new clutches. I guess it's not the stock one. I didn't know that the flywheel was a different size. But i guess it is because they won't fit. I guess I have to buy a new flywheel now to fit. My question for all of you is: What are the flywheel sizes? Which size should I buy for a stage 2 clutch made for a stock SR and stock Flywheel? What would be the stock flywheel i buy? Thank You for the help Please PM Me the help

Sir · 01-15-2008, 12:32 PM

according to exedy oem clutch disk is 240mm
http://www.exedyusa.com/oe/06803B

spirit · 01-15-2008, 12:41 PM

search: White bunny

Might be that flywheel.

RPS13nutt · 01-15-2008, 03:41 PM

your sr might have been used w/ a rwd de flywheel + clutch.

When i purchased my na sr i bought an exedy clutch kit for it, (det one)
to find out the flywheel on the engine was the same size as the exedy pressure plate.
so i had to source a det flywheel.
I believe that is your problem also.
I will have a pic up soon to show mine and the differences, maybe its the same as yours.

RPS13nutt · 01-15-2008, 06:47 PM

rwd de flywheel ontop of det pressure plate

det clutch (left) de clutch (right)

det pressure plate w/de flywheel side by side

01-15-2008, 12:07 PM	#1
iv196 Leaky Injector Join Date: Nov 2007 Location: Boynton Beach Florida Posts: 53 Trader Rating: (0) Feedback Score: 0 reviews	SR Clutch Flywheel Problem I have an SR with a stock clutch rite now. I bought, not one but 2 Stage 2 clutches for it and both of them did not work. At first i thot i bought the wrong one or the company made a mistake but none of them work. My flywheel is smaller than the one needed for my new clutches. I guess it's not the stock one. I didn't know that the flywheel was a different size. But i guess it is because they won't fit. I guess I have to buy a new flywheel now to fit. My question for all of you is: What are the flywheel sizes? Which size should I buy for a stage 2 clutch made for a stock SR and stock Flywheel? What would be the stock flywheel i buy? Thank You for the help Please PM Me the help

01-15-2008, 03:41 PM	#4
RPS13nutt Join Date: Oct 2005 Location: J'ville/ FLA Age: 43 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	your sr might have been used w/ a rwd de flywheel + clutch. When i purchased my na sr i bought an exedy clutch kit for it, (det one) to find out the flywheel on the engine was the same size as the exedy pressure plate. so i had to source a det flywheel. I believe that is your problem also. I will have a pic up soon to show mine and the differences, maybe its the same as yours. Last edited by RPS13nutt; 01-15-2008 at 06:36 PM..

01-15-2008, 12:41 PM	#3
spirit Zilvia Member Join Date: Dec 2005 Location: california Posts: 272 Trader Rating: (3) Feedback Score: 3 reviews	search: White bunny Might be that flywheel.

01-15-2008, 06:47 PM	#5
RPS13nutt Join Date: Oct 2005 Location: J'ville/ FLA Age: 43 Posts: 45 Trader Rating: (0) Feedback Score: 0 reviews	rwd de flywheel ontop of det pressure plate det clutch (left) de clutch (right) det pressure plate w/de flywheel side by side