Zenki HID Questions

[Dlauth]

I ordered a drop in HID kit. Was wondering what would make it look better and produce less glare/even light spread. Would a clear / non flutted lens help? Also Should I Paint the housing black? Any help appreciated.

[OptionZero]

reflectors suck
the zenki uses reflectors

those reflectors weren't intended for HID
reflectors that aren't intended for HID suck

therefore your idea sucks

if you care at all about proper lighting (actual visibility improvement, no glare for opposing drivers), you will do a more labor intensive retrofit of OEM or similar quality HID PROJECTOR

if you want to add a kewl entry to your mod list, have no money, or just want blue/green/purple headlights, get some cheapshit drop in kit

aint judging
just truthtellin

well, i'm judging a little bit

[SilviaSR20DET]

Yeah id have to agree with ^^^ i personally have the drop in hid kit and its really no use. The reflectors produce alot of glare and blinding oncoming traffic so i suggest using oem or do a retrofit projector in the housing.

[SlideWell]

i use SuperMade covers and a 5k HID kit. i give a fuck about oncoming traffic here in seattle. i get blinded by luxury cars and trucks alike. so whos the asshole, the auto maker or the auto enthusiast.

[!Zar!]

Ugh.


I don't even want to respond to that.

[Yellow4g63]

Originally Posted by Dlauth

I ordered a drop in HID kit. Was wondering what would make it look better and produce less glare/even light spread. Would a clear / non flutted lens help? Also Should I Paint the housing black? Any help appreciated.

Clear covers and S2k projector retro fit will do good.

[xtreme_s14]

-you rolled a seven! move seven spaces forward.

-chance! if you care about other's visibility while driving with HIDs please do not proceed with installing HIDs on your zenki headlights!

-you rolled a four! move forward four spaces.

-community chest! do not attempt making custom projectors for your zenki headlights because they will look like ass!

-you rolled an eleven! move forward eleven spaces. GO TO JAIL!

-this is where you will end up if you happen to blind any cops or cause any accidents due to your illegal modification!

-you rolled an eight (2 fours)! get out of jail!

-straighten up and fly right! convert to kouki headlights if you a) care about other's visibility AND b) want HIDs

sorry just got done playing monopoly with the fam-bam!

[LA_phantom_240]

Originally Posted by xtreme_s14

-community chest! do not attempt making custom projectors for your zenki headlights because they will look like ass!

Bullshit. With the right shroud, they look mighty fine. Don't discourage anyone who might want to try just because YOU suck ass at it.

Originally Posted by SlideWell

i use SuperMade covers and a 5k HID kit. i give a fuck about oncoming traffic here in seattle. i get blinded by luxury cars and trucks alike. so whos the asshole, the auto maker or the auto enthusiast.

wow.............. thats great advice.


tool.

[Slidin240Wayz]

Originally Posted by SlideWell

i use SuperMade covers and a 5k HID kit. i give a fuck about oncoming traffic here in seattle. i get blinded by luxury cars and trucks alike. so whos the asshole, the auto maker or the auto enthusiast.

The selfish, lazy auto enthusiast who does not care about other people's safety.

The DMV should offer a license specifically for "enthusiast" driver's to make sure they don't build them like ass.

JDM Zenki Housing
Clear Covers
Acura TSX HID Projector
4300k Phillips HID Bulb

[xtreme_s14]

Originally Posted by LA_phantom_240

Bullshit. With the right shroud, they look mighty fine. Don't discourage anyone who might want to try just because YOU suck ass at it.

ok! forget what i said.. they don't look like ass! they look like a horrific boob job where the doctor caused the nipples to look googly-eyed! ..and i'll admit at one point, YES i thought about making a custom projector for the zenki headlights, but i would not use overly large projectors to make them! ..and on top of that paint the reflector black?! leave it as is.. i think i've seen ONE decently custom projector headlights! i'll search for it later.. but for now, i'm off to work!

VS

[murda-c]

Use the rectangular qx4 projectors.

[SilviaSR20DET]

personally id just go with the german headlights and use oem bulbs as they are clearer and look better too!

[!Zar!]

lol at the fail and stupidity in this thread lol.

[LA_phantom_240]

Originally Posted by xtreme_s14

ok! forget what i said.. they don't look like ass! they look like a horrific boob job where the doctor caused the nipples to look googly-eyed! ..and i'll admit at one point, YES i thought about making a custom projector for the zenki headlights, but i would not use overly large projectors to make them! ..and on top of that paint the reflector black?! leave it as is.. i think i've seen ONE decently custom projector headlights! i'll search for it later.. but for now, i'm off to work!

VS

Function over form, my man.

TSX projectors may be large, but they're some of the best projectors made. Super intense, super wide, and fairly easy to work with.

Originally Posted by murda-c

Use the rectangular qx4 projectors.

Those are highbeam projectors. I looked into them at one point in time.

[S14DB]

Originally Posted by SlideWell

i use SuperMade covers and a 5k HID kit. i give a fuck about oncoming traffic here in seattle. i get blinded by luxury cars and trucks alike. so whos the asshole, the auto maker or the auto enthusiast.

How is eliminating the fresnels helping the problem? Just let more light all over the place.

The problem is in the reflector which is more of a U shape for the Halogen Bulb emission center. HID reflectors are more of a parabola shape. Putting a HID bulb in the halogen reflector puts the light center in the wrong place and throws off the beam dispersion and color.

What you need is to replace the back half with the reflector not the cover. Find a HID reflector that fits with a D2R mount. Screw putting a D2S bulb in a Halogen reflector.

YouTube - Illegal HID Convesion Kits Explained

[anthony240]

i was thinkin of rectangular/oval projectors as well. found these:





great attempt but aesthetically and functionally hideous.

[!Zar!]

I haven't heard/seen much about a rectangular projector.

[SlideWell]

Originally Posted by S14DB

How is eliminating the fresnels helping the problem? Just let more light all over the place.

The problem is in the reflector which is more of a U shape for the Halogen Bulb emission center. HID reflectors are more of a parabola shape. Putting a HID bulb in the halogen reflector puts the light center in the wrong place and throws off the beam dispersion and color.

What you need is to replace the back half with the reflector not the cover. Find a HID reflector that fits with a D2R mount. Screw putting a D2S bulb in a Halogen reflector.

YouTube - Illegal HID Convesion Kits Explained

my shit does not look like ass. what does tend to look like ass is certain projectors in zenki's. like a few pictured. i havent even driven my car yet, its still being built. dont get me wrong, il retrofit as soon as i can if im getting flashed a bunch. i love projectors and would like a smaller (tsx) projector in mine. i shouldnt have to say, high kelvin HID's from luxury cars are only approved because they come from the manufacturer, duh. seriously, i wanna hear someone tell me they ARENT blinded by their HIDS. i see plenty of pro-am drifters rock 13k kits and still drive on the streets, so what does that say. i dunno. but good to know i piss people off here, i like pissin people off sometimes

[!Zar!]

Getting a flash fomr a car with hid's because they are cresting over a hill, or jostling over a bump is one thing. But being blinded constantly by a car equip from the factory with hid's and projectors isn't true.

If whatever you're driving is lowered than of course you are going to be blinded by headlights being as how you are positioning yourself in their cutoff.

Because most cars cutoff goes about as high as a cars bumper~ so I don't see how they would be aimed up to your head.

Not to mention most lux cars have auto adjusting headlights.

Originally Posted by SlideWell

my shit does not look like ass. what does tend to look like ass is certain projectors in zenki's. like a few pictured. i havent even driven my car yet, its still being built. dont get me wrong, il retrofit as soon as i can if im getting flashed a bunch. i love projectors and would like a smaller (tsx) projector in mine. i shouldnt have to say, high kelvin HID's from luxury cars are only approved because they come from the manufacturer, duh. seriously, i wanna hear someone tell me they ARENT blinded by their HIDS. i see plenty of pro-am drifters rock 13k kits and still drive on the streets, so what does that say. i dunno. but good to know i piss people off here, i like pissin people off sometimes

do me a favor, fruitcake.. dont complain about GLARE when you're driving a fucking 240SX. drive a miata, THEN you have the right to complain about glare... because every car even a 1971 dodge "rape" van will have blinding lights.

look at the facts, when you drive a lowered car you deal with the consequences:
- difficulty when entering steep driveways
- hitting bumpstops
- slowing / scraping over speed bumps
- glare from other vehicles

higher kelvin bulbs arent approved? they arent acceptable in ANY means. factory xenon is 4300k, thats the only bulb that is generally sold and accepted by REAL manufacturers (not including the million of 13zillion kelvin knockoff bulbs sold by charlie-chan).

i've said it before and will say it again: if you want better lighting, buy the german glass headlights. if you want better than that, buy 97-98 and have them retrofitted.

you guys are wasting time and money fucking around with these shitty 95-96 headlights. and to you shitty vendors who sell HID kits, you guys should know better because that shit is illegal. anyone who disagrees is a liar and i challenge them to show me how they are compliant.

mike / clearcorners.com

[fliprayzin240sx]

Fuck you bitches...I like my TSX retrofit!!! Well just cuz its cheaper than piecing together a kouki front end. I hate stock zenki headlights with a fucking passion...

[BlckBeautyVTEC]

Stock Zenki headlights with HID isnt even that bad, its way better than stock, clean up the lens and call it a day who gives a shit, only person who ever had a sick projector retrofit in zenki headlights was scooter, those other ones (as seen as above) look bobo

[LA_phantom_240]

Originally Posted by fliprayzin240sx

Fuck you bitches...I like my TSX retrofit!!! Well just cuz its cheaper than piecing together a kouki front end. I hate stock zenki headlights with a fucking passion...

All you would need to make it look factory is a nice factory projector shroud.

I personally like my Zenki headlights. Much better than any s13 or other popup light vehicle I've owned. Not as good as my Acura Legend was, but still nice.

[TheArkitekt]

wow a memeber since 07 and you dont know the cardinal rules of Zilvia?

#1. NEVER TALK ABOUT DROP IN HID KITS!!!

Originally Posted by fliprayzin240sx

Fuck you bitches...I like my TSX retrofit!!! Well just cuz its cheaper than piecing together a kouki front end. I hate stock zenki headlights with a fucking passion...

whats the point of mentioning price?

if you talk about price, it means you obviously cannot afford something.

whats the point of having a baller paint job, baller wheels, baller turbo motor.. if you cant justify splurging on proper lighting (which if i may, has a lot to do with safety.)

for most people, german glass headlights with a good quality halogen bulb/relay setup is all you need.

for big ballers & shot callers, empty your bank account and go 97-98. at the very least you'll have nice GLASS projector headlights which can be easily upgraded with xenon projectors. at least your car wont look like cyclops when its all done.


its like having a nice suit and a cheap downtown special rolex watch.

[gario-]

Originally Posted by SilviaSR20DET

personally id just go with the german headlights and use oem bulbs as they are clearer and look better too!

take advice from the man. I hate his headlights.

[S14TEENZ]

i have pink HIDs and they look sick.....lol.....just clean the headlights with polish and the other stuuf and ur set.
zenki headlights do suck...but its a 240 so im gld with'em

[Matej]

Originally Posted by TheArkitekt

wow a memeber since 07 and you dont know the cardinal rules of Zilvia?

#1. NEVER TALK ABOUT DROP IN HID KITS!!!

Haha exactly.

[fliprayzin240sx]

Originally Posted by ixfxi

whats the point of mentioning price?

if you talk about price, it means you obviously cannot afford something.

whats the point of having a baller paint job, baller wheels, baller turbo motor.. if you cant justify splurging on proper lighting (which if i may, has a lot to do with safety.)

for most people, german glass headlights with a good quality halogen bulb/relay setup is all you need.

for big ballers & shot callers, empty your bank account and go 97-98. at the very least you'll have nice GLASS projector headlights which can be easily upgraded with xenon projectors. at least your car wont look like cyclops when its all done.


its like having a nice suit and a cheap downtown special rolex watch.

Well Mike, only reason i did it was to get better lighting output. I figured, why bother with a kouki front end? If I did the front end conversion, light output still sucks without modifying the kouki headlights (better projectors and OEM hid setups). Mo money mo money mo money that the mil doesnt exactly just throw at me. I'd rather spend that money on other shit than on a chassis thats gonna end up in an okinawa junkyard in 2 more years.

PFC, 850cc and Turbo > Kouki front end.