NJ FS: Complete Sr20 Full swap sale - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

eDmSiL80 · 06-07-2011, 08:20 AM

Hey i wana get rid of my sr setup. had my times with it but im trying to get to jz setup.

motor has
-cp pistrons
-arias rods
-greddy rocker arm stoppers
-full greddy topmount turbo kit. (fairly new)
-greddy downpipe
-greddy 40mm wastegate (bitch screams)
-intercooler piping
-PWR intercooler
-SR trans
-Fairly new competition clutch stage 3 clutch
-powdercoated valve cover
-750cc injectors
-Stock Sr ECU
-Full wiring harness
-BNIB greddy oil pan
-BNIB greddy EBC

and other stuff.

this setup ripped. just needs a pfc tune. and it would rip even more!

this has been my most reliable motor ever. and was rebuilt by AHM perfromance in maryland. hands down best motoro shop around.

lookin for $2300 OBO

i will be posting pictures soon.

u can message me here or email me at [email protected] for details. thanks

s13yaobling · 06-07-2011, 10:13 AM

PM me with what kind of injectors those are if you are gonna part it.

ArticSilver · 06-07-2011, 01:13 PM

have pics? was this in an s13 or s14?

atomicguy7 · 06-07-2011, 06:29 PM

Pics??? please.

Seraphim38 · 06-07-2011, 06:46 PM

stock cams? head studs? metal head gasket? stock head? compression test results?

s13silvia123 · 06-07-2011, 06:52 PM

mark just post up pics of your cars. or i shall do it for you LMAO

eDmSiL80 · 06-07-2011, 07:18 PM

lol who are u? thanks i will RIGHTTT MEOW haha

heres the setup from last year.

here's the turbo kit when i got it

and vidja of it running

biyahh on Vimeo
brap brap on Vimeo

kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though.

i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

eDmSiL80 · 06-07-2011, 07:22 PM

alright. the compression test is no bueno. cylinder four is fairly low. and i ran it just how it was on those videos. so the motor still runs. just not full potential. So my guess it needs some new rings and a rear main seal on the motor. to answer some questions it has a cometic head gasket and stock studs. Had a full refresh about 2 years ago. id like to get $1000 for the whole swap. which includes wiring harness, ecu, motor and trans. lmk. thanks

atomicguy7 · 06-07-2011, 08:23 PM

i want this so bad, if you have in come fall ill take it

eDmSiL80 · 06-07-2011, 09:14 PM

watchu want and can offer

got a z trans adapter kit or good offset 4 lug wheels?

s13silvia123 · 06-07-2011, 09:30 PM

Quote:

Originally Posted by eDmSiL80

lol who are u? thanks i will RIGHTTT MEOW haha

heres the setup from last year.

here's the turbo kit when i got it

kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though.

i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

your secret ninja on facebook LOL

eDmSiL80 · 06-09-2011, 04:15 PM

bump.

Willing to take $1200 for the greddy turbo kit. Scoop up this sweet setup!

nile · 06-09-2011, 04:23 PM

would you happen to be selling the jdm front?

eDmSiL80 · 06-10-2011, 05:25 PM

my silvia heads? Id trade for a whole pop up front. has to be 30mm front fenders and some cool front bumper though. i dont know many people that have my origin urban kit either.

eDmSiL80 · 06-19-2011, 01:33 PM

bump. im getting a garage at my house. not gonna have room for all this. so im gona start seperating everything. Someone pick up this great swap!

eDmSiL80 · 06-27-2011, 09:50 AM

bump

guess the v8 era is ruining the "culture"

someone pick this shit up!

bikrman2 · 06-27-2011, 01:48 PM

How low is the compression? I'm pretty interested. Also so the injectors come with the swap?

eDmSiL80 · 07-05-2011, 10:14 PM

bump...throw me reasonable offers. need this stuff gone.

Prez · 07-06-2011, 06:07 AM

pm'd msg length

*racerx2k1* · 07-06-2011, 08:38 AM

Quote:

Originally Posted by eDmSiL80

bump.

Willing to take $1200 for the greddy turbo kit. Scoop up this sweet setup!

Quote:

Originally Posted by eDmSiL80

bump. im getting a garage at my house. not gonna have room for all this. so im gona start seperating everything. Someone pick up this great swap!

Quote:

Originally Posted by eDmSiL80

bump

guess the v8 era is ruining the "culture"

someone pick this shit up!

Quote:

Originally Posted by eDmSiL80

bump...throw me reasonable offers. need this stuff gone.

2 bump limit. You can start new thread in 3 days.

06-07-2011, 08:20 AM	#1
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	FS: Complete Sr20 Full swap sale Hey i wana get rid of my sr setup. had my times with it but im trying to get to jz setup. motor has -cp pistrons -arias rods -greddy rocker arm stoppers -full greddy topmount turbo kit. (fairly new) -greddy downpipe -greddy 40mm wastegate (bitch screams) -intercooler piping -PWR intercooler -SR trans -Fairly new competition clutch stage 3 clutch -powdercoated valve cover -750cc injectors -Stock Sr ECU -Full wiring harness -BNIB greddy oil pan -BNIB greddy EBC and other stuff. this setup ripped. just needs a pfc tune. and it would rip even more! this has been my most reliable motor ever. and was rebuilt by AHM perfromance in maryland. hands down best motoro shop around. lookin for $2300 OBO i will be posting pictures soon. u can message me here or email me at [email protected] for details. thanks Last edited by eDmSiL80; 07-05-2011 at 10:15 PM..

06-07-2011, 06:29 PM	#4
atomicguy7 Zilvia Member Join Date: Oct 2009 Location: LI Age: 38 Posts: 250 Trader Rating: (4) Feedback Score: 4 reviews	Pics??? please. __________________ Looking for a s13 coupe, in northeast. PM me!

06-07-2011, 06:52 PM	#6
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 43 Posts: 3,267 Trader Rating: (16) Feedback Score: 16 reviews	mark just post up pics of your cars. or i shall do it for you LMAO __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

06-07-2011, 08:23 PM	#9
atomicguy7 Zilvia Member Join Date: Oct 2009 Location: LI Age: 38 Posts: 250 Trader Rating: (4) Feedback Score: 4 reviews	i want this so bad, if you have in come fall ill take it __________________ Looking for a s13 coupe, in northeast. PM me!

07-06-2011, 06:07 AM	#19
Prez Zilvia Junkie Join Date: Dec 2008 Location: Newark, Delaware Posts: 466 Trader Rating: (7) Feedback Score: 7 reviews	pm'd msg length __________________ "soft so you can't even enjoy it"

06-07-2011, 10:13 AM	#2
s13yaobling Zilvia Member Join Date: Feb 2009 Location: Las Vegas Age: 38 Posts: 169 Trader Rating: (5) Feedback Score: 5 reviews	PM me with what kind of injectors those are if you are gonna part it.

06-07-2011, 01:13 PM	#3
ArticSilver Zilvia Member Join Date: May 2010 Location: Newark, NJ Age: 39 Posts: 226 Trader Rating: (8) Feedback Score: 8 reviews	have pics? was this in an s13 or s14?

06-07-2011, 06:46 PM	#5
Seraphim38 Zilvia Addict Join Date: Oct 2010 Location: Washington Posts: 810 Trader Rating: (6) Feedback Score: 6 reviews	stock cams? head studs? metal head gasket? stock head? compression test results?

06-07-2011, 07:18 PM	#7
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	lol who are u? thanks i will RIGHTTT MEOW haha heres the setup from last year. here's the turbo kit when i got it and vidja of it running biyahh on Vimeo brap brap on Vimeo kit comes with everything you need to run it. Turbo lines, wastegate, downpipe, manifold, turbo, etc. I made 280hp on this with a safc. Just need cams and a pfc. easy 380-400hp with a great curve. This is meant for RHD cars only so its mad jdm. but i modified it to clearing the steering rack so your fine. Only downfall is the wastegate sits pretty low. just as close as the steering rack sits. had no problems though. i literally put only 4 events on this turbo setup. I would like to get $1500 obo for it. I also have a BNIB greddy oil pan and BNIB greddy ebc i can throw in for extra.

06-07-2011, 07:22 PM	#8
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	alright. the compression test is no bueno. cylinder four is fairly low. and i ran it just how it was on those videos. so the motor still runs. just not full potential. So my guess it needs some new rings and a rear main seal on the motor. to answer some questions it has a cometic head gasket and stock studs. Had a full refresh about 2 years ago. id like to get $1000 for the whole swap. which includes wiring harness, ecu, motor and trans. lmk. thanks

06-07-2011, 09:14 PM	#10
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	watchu want and can offer got a z trans adapter kit or good offset 4 lug wheels?

06-09-2011, 04:15 PM	#12
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	bump. Willing to take $1200 for the greddy turbo kit. Scoop up this sweet setup!

06-09-2011, 04:23 PM	#13
nile Zilvia Junkie Join Date: Mar 2008 Location: plainfeild Posts: 343 Trader Rating: (1) Feedback Score: 1 reviews	would you happen to be selling the jdm front?

06-10-2011, 05:25 PM	#14
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	my silvia heads? Id trade for a whole pop up front. has to be 30mm front fenders and some cool front bumper though. i dont know many people that have my origin urban kit either.

06-19-2011, 01:33 PM	#15
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	bump. im getting a garage at my house. not gonna have room for all this. so im gona start seperating everything. Someone pick up this great swap!

06-27-2011, 09:50 AM	#16
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	bump guess the v8 era is ruining the "culture" someone pick this shit up!

07-05-2011, 10:14 PM	#18
eDmSiL80 Zilvia Junkie Join Date: Sep 2005 Location: SoCal Age: 36 Posts: 523 Trader Rating: (9) Feedback Score: 9 reviews	bump...throw me reasonable offers. need this stuff gone.