Z32 or other brake boosters

[g6civcx]

Originally Posted by cdlong

any idea what the piston diameter is on the 180sx calipers?

It's the same as a mid 90s Maxima.


I was swapping out one part at a time because I was working on the engine swap. The braided brake lines were necessary for me during the swap because the motor goes 6" back into the firewall, which is right through where the stock hardlines were routed.

Now that the motor is running I'm just getting back to fixing the suspension and brakes. I know I can just bolt in a complete Z32 front and rear caliper kit and be done, but considering the motor was just finished 2 days ago I think I'm making good progress.