SR motor 'suddenly' off center

[Drifting-pedobear]

Hey guys.

quick back story, i had the shitty yellow mounts that that dude on here makes (dont buy them, they are shit)- and i still think they are, sorry bros.

this happened at an event, no crashing, just good ol drifto:



on the way home, a 5 hour drive, the exhaust falls off (wut) just a stock exhaust. must have sheared the bolts, and broke the rubber hangers. my luck was pretty shit. (at the time i didnt know i had the busted mounts.


i limp it home and notice that suddenly, putting it into 5th hits the shifter trim on the inside of the car.

i get it in the air and notice the mounts are broken, and when inspecting the tranny mounty, find that it has sheared the bolts holding the mount on.

sick.



so i put on stock mounts, but when i go to bolt up the tranny crossmember, it takes all me and my friends force to get the holes to line up (its way off, like way off...) and we use a crowbar to pull it over and bolt it up. something is obviously wrong...

i go to do a little spin. and after the first drift, the shifter is back over again.


so i took some pics, maybe you guys will notice i installed something wrong (the motor mounts backwards or upside down or some stupid shit).


any ideas?