New Japanese brand's debut in the USA: Parts Shop MAX - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DC Dan MAX USA · 12-28-2007, 07:35 PM

You're welcome.
You can see one fitting is on the end of the master going left with a 90 degree fitting and one is on top with a 90 degree fitting.
"The top port on the hand brake goes to the OEM master cylinder's rear brake output, the end port of handbrake goes to the hard line that used to screw into the OEM master."
The bleed is the same process as if you replaced your brake lines only there is more air because of the cavity inside the handbrake's master. You'll need two cans of fluid and you'll probably bleed everything twice to get all the air out.

12-28-2007, 07:35 PM	#11
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	You're welcome. You can see one fitting is on the end of the master going left with a 90 degree fitting and one is on top with a 90 degree fitting. "The top port on the hand brake goes to the OEM master cylinder's rear brake output, the end port of handbrake goes to the hard line that used to screw into the OEM master." The bleed is the same process as if you replaced your brake lines only there is more air because of the cavity inside the handbrake's master. You'll need two cans of fluid and you'll probably bleed everything twice to get all the air out. __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!