Subframe bushing removel - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

aznpoopy · 05-13-2009, 12:31 PM

burn it out as much as you can, then cut through the remaining metal collar with a sawzall. be careful not to notch the subframe.

once the metal collar has been cut through, wedge something into the cut to peel the first edge away from the surface. then jam a screw driver (and eventually a pry bar) in there, and go around and pry until you have a good portion of it loose. then hit it with a hammer and it should pop out.

05-13-2009, 12:31 PM	#2
aznpoopy Post Whore! Join Date: Mar 2003 Location: New Jersey Age: 44 Posts: 5,013 Trader Rating: (1) Feedback Score: 1 reviews	burn it out as much as you can, then cut through the remaining metal collar with a sawzall. be careful not to notch the subframe. once the metal collar has been cut through, wedge something into the cut to peel the first edge away from the surface. then jam a screw driver (and eventually a pry bar) in there, and go around and pry until you have a good portion of it loose. then hit it with a hammer and it should pop out.