New Japanese brand's debut in the USA: Parts Shop MAX

[Slidin240Wayz]

How much for the oil pan protector?

07083

Carlos

[rbpowered_240]

how much for the S14 rad with RB25DET installed shipped to 22060, also any FMIC kits for the RB25DET. If so how much shipped for that as well.

[240on430]

*****S13 OIL PAN GUARD PANEL IN STOCK NOW*****

do SRs and KA's have the drain plug at the same area? how thick is it?

how much shipped to 94014?

[DC Dan MAX USA]

Originally Posted by 240on430

do SRs and KA's have the drain plug at the same area? how thick is it?

how much shipped to 94014?

I really dont know, but I took some quick measurements if you want to compare to your car. The front side goes into the center hole on the radiator support and the rear mounts to the two holes on the cross member.

It is 2mm thick aluminum. $115 shipped to you.

[hotlavaflow]

So that means it'll fit on the S13 but your not sure if the drain hole is good for both the SR and the KA? And how much shipped to 11226? I'm gonna order the coils at the end of the week and with NY streets I need some oil pan protection.

Originally Posted by DC Dan MAX USA

I really dont know, but I took some quick measurements if you want to compare to your car. The front side goes into the center hole on the radiator support and the rear mounts to the two holes on the cross member.

It is 2mm thick aluminum. $115 shipped to you.

[DC Dan MAX USA]

Originally Posted by hotlavaflow

So that means it'll fit on the S13 but your not sure if the drain hole is good for both the SR and the KA? And how much shipped to 11226? I'm gonna order the coils at the end of the week and with NY streets I need some oil pan protection.

Yes it will fit the S13 (and even the S14 with some new holes) But no I was not sure about the oil plug hole location on KA's but if you want to measure or take brians word then you should be straight.

Oil pan guard is $120 shipped.

[240on430]

Originally Posted by DC Dan MAX USA

I really dont know, but I took some quick measurements if you want to compare to your car. The front side goes into the center hole on the radiator support and the rear mounts to the two holes on the cross member.

It is 2mm thick aluminum. $115 shipped to you.

I'll take one if it has been mounted under a KA. Does it come with screws or bolts? I took the undercover off and I might not be able to locate the original screws.

[DC Dan MAX USA]

Originally Posted by rbpowered_240

how much for the S14 rad with RB25DET installed shipped to 22060, also any FMIC kits for the RB25DET. If so how much shipped for that as well.

There is no radiator or IC kit for S14 with RB, But instead you should ge the R33 radiator because the inlet and outlet are on the correct side and you will just have to move the brackets. It's $230 shipped. The RB intercooler kit is $425 shipped, and you will likely have to mod the piping.

[DC Dan MAX USA]

Originally Posted by Slidin240Wayz

How much for the oil pan protector?

07083

Carlos

$125 shipped to you.