TW: 210 BAR/ 3045 PSI High Press. Power Steering Line(s) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AzNCmB · 11-19-2007, 09:17 PM

hey guys,

For sale, high pressure power steering lines. Unlike the factory line that leak over time, these lines would never break if installed correctly! Great for any type of driving/racing. I have a few of them and would sell them for $75 shipped or picked up each.

Features:
210 bar/3045psi High press. Eaton Aeroquip hosing
fittings and o-rings
factory replacment
all hardware included for installation

Benefits:
Withstands way more pressure than what stock ps can produce, meaning more full lock to full lock counter steering action!
No more leaks
same price as oem lines from napa, pretty sure they are cheaper than oem nissan
long lasting
eliminate the long loop of stock line, which gives better clearance if you're using e-fans such as altima or want a cleaner less cluttering engine bay.

right now, all i have is lines for dohc ka24de which is also compatible with sr20det motors.

disclaimer: these are for offroad use only, i am not liable for product failure wich includes but is not limited to mis use or improper installation. Also, these eliminate the factory ps pressure sensor.

reply here, or pm me if interested...
location: new orleans, La
thanks in advance

payment method:
paypal or money order via snail mail or cash in hand(in person transaction)
paypal address will be up once i get someone interested...

installed pictures and installation below...

ctm_motortrends · 11-19-2007, 09:38 PM

Can I get a pic of it installed ? Dibs on one.

AzNCmB · 11-19-2007, 09:41 PM

Quote:

Originally Posted by ctm_motortrends

Can I get a pic of it installed ? Dibs on one.

yes, i will get a few pics of it installed on my s14 tomorrow when there's daylight. I will also include a short install instructions too.

thanks for your interest.

AzNCmB · 11-20-2007, 09:56 AM

heres installed pictures: (no flash)

(flash)

^^ basic instructions^^

these come 17inches long, which imo is just about enough in length, but I can get them longer or shorter if you guys need it to clear more stuff.

When ordering, please specify custom length if needed, if you don't, then you would get the standard 17inch.

lmk

sean350z · 11-20-2007, 12:21 PM

I may take one...what's the fitting/thread pitch size on the rack for the low pressure line?

Thanks,
Sean.

AzNCmB · 11-20-2007, 12:30 PM

Quote:

Originally Posted by sean350z

I may take one...what's the fitting/thread pitch size on the rack for the low pressure line?

Thanks,
Sean.

i'm not %100 sure whats the size/thread pitch, since i reused the stock fitting and just bought new hoses...

judging from the picture, it looks similar to the high press. side that goes into the rack, so who know's, they both may be the same 14x1.25.

hope that helped...

bump!

Sir · 11-20-2007, 12:38 PM

its 16mm, same as used for pump.

vutony · 11-20-2007, 02:58 PM

from the pics, the line looks stretched
interested if you have have it coupel inches longer

AzNCmB · 11-20-2007, 03:50 PM

its not stretched at all, as much as you can try, physically, you cant stretched these lines...

and yes, i can get them longer if u need, just let me know the length, as stated in the previous post, these are perfect for me, no stretch or anything, clears the crossmember fine

AzNCmB · 11-20-2007, 04:57 PM

pics of what i have so far...
i can get more to0...

bump, lmk!!! ready to ship!
paypal address is [email protected]

AzNCmB · 11-20-2007, 11:42 PM

bump, paypal address up!

vutony · 11-21-2007, 01:11 AM

how long is it?
is it the same length as stock

intersted in any trades?
http://www.zilvia.net/f/showthread.php?t=165039

sean350z · 11-21-2007, 07:04 AM

Bump paypal sent.

statik · 11-21-2007, 07:52 AM

interesting, though I thought those double loop lines in the front were for some sort of cooling?

AzNCmB · 11-21-2007, 09:07 AM

Quote:

Originally Posted by vutony

how long is it?
is it the same length as stock

intersted in any trades?
http://www.zilvia.net/f/showthread.php?t=165039

it is not the same length as stock, its around 16 or 17inchs long. The lines eliminate the stock loop that goes from the pump to the front(near the radiator) and then to the rack.

This line is straight point A to point B, Ps pump-----> steering rack, no loops, a small S bend, thats it.

the only thing im interested in your thread to trade is the nismo 740cc injectors, but Im sure u want cash+trade, right now I cant do that, but I'll let you know when I have funds available.

Quote:

Originally Posted by sean350z

Bump paypal sent.

thanks! will be shipped ups today! i'll get u a tracking number...

Quote:

Originally Posted by statik

interesting, though I thought those double loop lines in the front were for some sort of cooling?

hmmm...
i dont think so because the oem cooler is on the low pressure side, its a bunch of aluminum tubes that go from the driverside to the pass. side along the cross member.

Skullavera · 11-21-2007, 11:10 AM

Will the price be the same if the line is 20" long? I think that length would be perfect for me.

grnappletree14 · 11-21-2007, 11:24 AM

can u tell me the fitting sizez i have a aircraft place by my house that can make them lmk thanks

AzNCmB · 11-23-2007, 08:16 PM

^^bump^^bump^^^^bump^^^^

AzNCmB · 11-25-2007, 03:01 AM

bump!!bump!!bump!!bump!!

vutony · 12-04-2007, 04:06 PM

Quote:

the only thing im interested in your thread to trade is the nismo 740cc injectors, but Im sure u want cash+trade, right now I cant do that, but I'll let you know when I have funds available.

ill take one line plsu cash for the 740cc whenver ur ready
i need line to be an inch or so longer

Bushido · 12-04-2007, 06:39 PM

can you make a hose for the low pressure side too?

AzNCmB · 12-05-2007, 01:14 AM

Quote:

Originally Posted by Bushido

can you make a hose for the low pressure side too?

no,
i'd rather not, because the low pressure is fine with the stock line or a stock replacement hose...it doesnt seee much pressure, hence "low pressure"

lbsam · 12-05-2007, 04:24 PM

you still have some of these left? I can't purchase until next friday.. (pay day.). JW if you still have some because im needing one.

AzNCmB · 12-05-2007, 04:25 PM

yes, i have like 4 more left...
lmk

dops13 · 12-05-2007, 08:34 PM

I sent you money. This is way cheap!!!

AzNCmB · 12-05-2007, 09:53 PM

thanks guys, payments recieved...
will ship out 2morrow...

expect usps priority

D.Bo · 01-21-2009, 09:13 AM

BUUMP!! just bought my second line for my other 240. ive had it on my s13 for over a year now and ive just got another one for my other s13. great product good seller

11-19-2007, 09:17 PM	#1
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	FS: 210 BAR/ 3045 PSI High Press. Power Steering Line(s) hey guys, For sale, high pressure power steering lines. Unlike the factory line that leak over time, these lines would never break if installed correctly! Great for any type of driving/racing. I have a few of them and would sell them for $75 shipped or picked up each. Features: 210 bar/3045psi High press. Eaton Aeroquip hosing fittings and o-rings factory replacment all hardware included for installation Benefits: Withstands way more pressure than what stock ps can produce, meaning more full lock to full lock counter steering action! No more leaks same price as oem lines from napa, pretty sure they are cheaper than oem nissan long lasting eliminate the long loop of stock line, which gives better clearance if you're using e-fans such as altima or want a cleaner less cluttering engine bay. right now, all i have is lines for dohc ka24de which is also compatible with sr20det motors. disclaimer: these are for offroad use only, i am not liable for product failure wich includes but is not limited to mis use or improper installation. Also, these eliminate the factory ps pressure sensor. reply here, or pm me if interested... location: new orleans, La thanks in advance payment method: paypal or money order via snail mail or cash in hand(in person transaction) paypal address will be up once i get someone interested... installed pictures and installation below... __________________ duh mah! wheels and suspension! Last edited by AzNCmB; 01-21-2009 at 08:46 AM..

11-20-2007, 09:56 AM	#4
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	heres installed pictures: (no flash) (flash) ^^ basic instructions^^ these come 17inches long, which imo is just about enough in length, but I can get them longer or shorter if you guys need it to clear more stuff. When ordering, please specify custom length if needed, if you don't, then you would get the standard 17inch. lmk __________________ duh mah! wheels and suspension!

11-20-2007, 12:21 PM	#5
sean350z Zilvia Addict Join Date: Nov 2005 Location: Downingtown, PA Posts: 890 Trader Rating: (5) Rides Gallery: sean350z Feedback Score: 5 reviews	I may take one...what's the fitting/thread pitch size on the rack for the low pressure line? Thanks, Sean. __________________

11-20-2007, 02:58 PM	#8
vutony Post Whore! Join Date: Jul 2005 Location: (714) OC area Posts: 5,273 Trader Rating: (145) Feedback Score: 145 reviews	from the pics, the line looks stretched interested if you have have it coupel inches longer __________________ i have engine hoist for rent i do SR wiring

11-20-2007, 03:50 PM	#9
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	its not stretched at all, as much as you can try, physically, you cant stretched these lines... and yes, i can get them longer if u need, just let me know the length, as stated in the previous post, these are perfect for me, no stretch or anything, clears the crossmember fine __________________ duh mah! wheels and suspension!

11-19-2007, 09:38 PM	#2
ctm_motortrends Zilvia FREAK! Join Date: Mar 2007 Location: MONTCLAIR Age: 43 Posts: 1,104 Trader Rating: (1) Feedback Score: 1 reviews	Can I get a pic of it installed ? Dibs on one.

11-20-2007, 04:57 PM	#10
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	pics of what i have so far... i can get more to0... bump, lmk!!! ready to ship! paypal address is [email protected] __________________ duh mah! wheels and suspension! Last edited by AzNCmB; 11-20-2007 at 05:47 PM..

11-20-2007, 11:42 PM	#11
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	bump, paypal address up! __________________ duh mah! wheels and suspension!

11-21-2007, 01:11 AM	#12
vutony Post Whore! Join Date: Jul 2005 Location: (714) OC area Posts: 5,273 Trader Rating: (145) Feedback Score: 145 reviews	how long is it? is it the same length as stock intersted in any trades? http://www.zilvia.net/f/showthread.php?t=165039 __________________ i have engine hoist for rent i do SR wiring

11-21-2007, 07:04 AM	#13
sean350z Zilvia Addict Join Date: Nov 2005 Location: Downingtown, PA Posts: 890 Trader Rating: (5) Rides Gallery: sean350z Feedback Score: 5 reviews	Bump paypal sent. __________________

11-21-2007, 07:52 AM	#14
statik Zilvia FREAK! Join Date: Oct 2003 Location: Long Island, NY Age: 40 Posts: 1,358 Trader Rating: (0) Rides Gallery: statik Feedback Score: 0 reviews	interesting, though I thought those double loop lines in the front were for some sort of cooling? __________________ 97 240sx esaarr \| Current Status: SOLD

11-21-2007, 11:10 AM	#16
Skullavera Zilvia FREAK! Join Date: Sep 2005 Location: City of Angels Posts: 1,327 Trader Rating: (1) Rides Gallery: Skullavera Feedback Score: 1 reviews	Will the price be the same if the line is 20" long? I think that length would be perfect for me. __________________ Reviews/Feedback!

11-21-2007, 11:24 AM	#17
grnappletree14 BANNED Join Date: Aug 2006 Location: SOCAL/chino hills (909) Posts: 1,829 Trader Rating: (6) Feedback Score: 6 reviews	can u tell me the fitting sizez i have a aircraft place by my house that can make them lmk thanks

11-23-2007, 08:16 PM	#18
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	^^bump^^bump^^^^bump^^^^ __________________ duh mah! wheels and suspension!

11-25-2007, 03:01 AM	#19
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	bump!!bump!!bump!!bump!! __________________ duh mah! wheels and suspension!

12-04-2007, 06:39 PM	#21
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,563 Trader Rating: (10) Feedback Score: 10 reviews	can you make a hose for the low pressure side too? __________________

12-05-2007, 04:24 PM	#23
lbsam Zilvia Member Join Date: Sep 2007 Location: ▌║║║▌║││║ ║█ Posts: 209 Trader Rating: (12) Feedback Score: 12 reviews	you still have some of these left? I can't purchase until next friday.. (pay day.). JW if you still have some because im needing one.

12-05-2007, 04:25 PM	#24
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	yes, i have like 4 more left... lmk __________________ duh mah! wheels and suspension!

12-05-2007, 08:34 PM	#25
dops13 Zilvia Addict Join Date: Dec 2004 Location: san diego Posts: 732 Trader Rating: (5) Feedback Score: 5 reviews	I sent you money. This is way cheap!!!

12-05-2007, 09:53 PM	#26
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 41 Posts: 1,144 Trader Rating: (2) Feedback Score: 2 reviews	thanks guys, payments recieved... will ship out 2morrow... expect usps priority __________________ duh mah! wheels and suspension!

01-21-2009, 09:13 AM	#27
D.Bo Zilvia Member Join Date: Mar 2007 Location: New Orleans Age: 36 Posts: 284 Trader Rating: (0) Feedback Score: 0 reviews	BUUMP!! just bought my second line for my other 240. ive had it on my s13 for over a year now and ive just got another one for my other s13. great product good seller

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode