Explosion and smoke from KA24DE distributor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NIK90s13 · 05-31-2006, 06:58 AM

Pull your valve cover and visually inspect for dammage. DON'T start the car. If you dont see any dammage, check the distrobuter for damage to the splines. If no damage there, recheck your timing setup. Make sure your cams are pointing away from each other, line up your timing marks, reinstall the distrobuter. Crank the motor BY HAND till the cams and dist. are lined back up at T.D.C. Then try to start it. Post what you find.

05-31-2006, 06:58 AM	#1
NIK90s13 Zilvia Junkie Join Date: Jan 2006 Location: texas Age: 58 Posts: 471 Trader Rating: (0) Feedback Score: 0 reviews	Pull your valve cover and visually inspect for dammage. DON'T start the car. If you dont see any dammage, check the distrobuter for damage to the splines. If no damage there, recheck your timing setup. Make sure your cams are pointing away from each other, line up your timing marks, reinstall the distrobuter. Crank the motor BY HAND till the cams and dist. are lined back up at T.D.C. Then try to start it. Post what you find.