sr tranny help please anybody - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cogden · 07-19-2006, 05:39 PM

yeah so i went to change out my tranny rear seal and i could not get the whole seal out it ripped apart when i tried to pry it out and now it has pieces stuck in it .is there a bushing in there ,do i have to get a special puller

any advice would prob be a big help thanks

cogden · 07-20-2006, 04:13 PM

please help anybody !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

RedtopTech · 07-20-2006, 06:02 PM

you can get a seal puller from advance auto, a long shank screw driver should work as well. My rear seal is leaking as well. i saw online today that a s14 240sx seal would fit but when i picked it up from nappa it apeared to be way to small. Where did you get your seal from.

cogden · 07-21-2006, 06:21 AM

i picked my seal up from auto zone it was like 4 bucks and i know it fit's ask for a 93 seal its the same tranny

but back to my problem will the seal puller pull out the bushing ??????????
cuz part of the seal is stuck between the tranny and the bushing.........

projectRDM · 07-21-2006, 09:14 AM

There is no bushing in the tail shaft. Pull out the seat with a flat blade screwdriver, install the new one with a large socket. Cake. If you can't do that you need to find a new hobby.

07-19-2006, 05:39 PM	#1
cogden Leaky Injector Join Date: Dec 2004 Location: richmond va Age: 40 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	sr tranny help please anybody yeah so i went to change out my tranny rear seal and i could not get the whole seal out it ripped apart when i tried to pry it out and now it has pieces stuck in it .is there a bushing in there ,do i have to get a special puller any advice would prob be a big help thanks

07-20-2006, 04:13 PM	#2
cogden Leaky Injector Join Date: Dec 2004 Location: richmond va Age: 40 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	please help anybody !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

07-20-2006, 06:02 PM	#3
RedtopTech Zilvia Member Join Date: Dec 2005 Location: Virginia Beach, VA Age: 40 Posts: 293 Trader Rating: (0) Feedback Score: 0 reviews	you can get a seal puller from advance auto, a long shank screw driver should work as well. My rear seal is leaking as well. i saw online today that a s14 240sx seal would fit but when i picked it up from nappa it apeared to be way to small. Where did you get your seal from.

07-21-2006, 06:21 AM	#4
cogden Leaky Injector Join Date: Dec 2004 Location: richmond va Age: 40 Posts: 58 Trader Rating: (0) Feedback Score: 0 reviews	i picked my seal up from auto zone it was like 4 bucks and i know it fit's ask for a 93 seal its the same tranny but back to my problem will the seal puller pull out the bushing ?????????? cuz part of the seal is stuck between the tranny and the bushing.........

07-21-2006, 09:14 AM	#5
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	There is no bushing in the tail shaft. Pull out the seat with a flat blade screwdriver, install the new one with a large socket. Cake. If you can't do that you need to find a new hobby.