O2 sensor removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BlackFox · 07-02-2002, 03:51 PM

yeah, unplug it and get the wrench on there and give it a good hard pull, make sure the right way.

As for the heat sheild. you should probably wrap your manifold so the heat is transfered away from your engine bay, hotter air = hotter intake air. my engine bay gets very hot even with the heat shield, don't want to melt important wires. Also if the heat doesn't go down the pipe as quickly then your cats wont' heat up as fast so that could do something funky.

07-02-2002, 03:51 PM	#1
BlackFox Zilvia Junkie Join Date: Feb 2002 Location: San Jose, CA Posts: 534 Trader Rating: (0) Feedback Score: 0 reviews	yeah, unplug it and get the wrench on there and give it a good hard pull, make sure the right way. As for the heat sheild. you should probably wrap your manifold so the heat is transfered away from your engine bay, hotter air = hotter intake air. my engine bay gets very hot even with the heat shield, don't want to melt important wires. Also if the heat doesn't go down the pipe as quickly then your cats wont' heat up as fast so that could do something funky. __________________ Current Cars: 1976 Mercedes Benz 300D 1995 240sx SE aka Kate (winner: Best Stock S14 @ 2002 National Convention) http://community.webshots.com/user/jeff976cal If you're interested in parts email me [email protected]