Power Steering woes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CylonFrakker · 11-09-2006, 08:54 AM

--------------------------------------------------------------------------------

OK so after the whole head gasket install. My power steering has not worked since day one of the 2JZ install . I have ignored it and just driven it like that. So today after the car decided to follow a groove in the road and almost put me in the wall i decided its time to fix it. Now I have removed the pump and replaced the pump. Still no Power Steering. I replaced the reservoir and its still doesn't work. I replaced the return hose form the frame rail to the pump and still no power steering. I am only to believe that my rack is FUBAR'd I have even tried to bleed the powersteering pump a few times. Nothing. The fluid does not over boil and the pump does not make any nosie. So next I need to find the drain for the rack and drain it fully run compressed air through it and and make sure its not clogged. Then go from there. It doesn't leak and it seems to be cycling the fluid from out of the reservoir and back into it. It just does not work. I am going nuts about it. Any help would be appreciated. Any ideas what to look for. I did slightly bend one of my lines out of the way for the intercooler but its not kinked just moved slightly. Like 1cm. to the outside which means its straightened not pinched.

McRussellPants · 11-09-2006, 08:58 AM

The return from the rack should go to the resivoir.

a line should go from the resivoir to the pump

and then the high pressure hose should go from the pump to the rack.

CylonFrakker · 11-09-2006, 09:33 AM

Quote:

Originally Posted by McRussellPants

The return from the rack should go to the resivoir.

a line should go from the resivoir to the pump

and then the high pressure hose should go from the pump to the rack.

1. The return is going to the reservoir

2. There is a line going to the reservoir to the pump

3. The high pressure hose does goe the the rack from the pump.

The system cycles fluid in and out with out a glitch so i don't know what the fuck is going on. I have yet to blow air through the lines to make sure they are clean and empty! Are their any filters on the rack or on the lines?

*ManoNegra* · 11-09-2006, 09:46 AM

What fluid are you using?
240s take ATF instead of power steering fluid.

slideways2004 · 11-09-2006, 07:58 PM

Quote:

Originally Posted by ManoNegra

What fluid are you using?
240s take ATF instead of power steering fluid.

what is the difference between power steering and atf? (retard moment)

CylonFrakker · 11-09-2006, 11:43 AM

so do the 2JZ pumps. I had my pump tested and its good for 1000 psi!

infinitexsound · 11-09-2006, 06:19 PM

check again for plumbing route.. and iono try ur pump again....

cmcdougle · 11-09-2006, 11:22 PM

Will it hurt it to run power steering fluid? They have similar consistancies.

Check howstuffworks.com for a diagram, maybe something in that gearing is messed up.

CylonFrakker · 11-10-2006, 07:02 AM

i am going to pull the rack and replace the filters as well run new lines for high pressure and low pressure. I am also going to blow the lines clean and get everything out.

11-09-2006, 08:54 AM	#1
CylonFrakker Zilvia Addict Join Date: Apr 2003 Location: Nashville TN Age: 42 Posts: 899 Trader Rating: (3) Feedback Score: 3 reviews	Power Steering woes -------------------------------------------------------------------------------- OK so after the whole head gasket install. My power steering has not worked since day one of the 2JZ install . I have ignored it and just driven it like that. So today after the car decided to follow a groove in the road and almost put me in the wall i decided its time to fix it. Now I have removed the pump and replaced the pump. Still no Power Steering. I replaced the reservoir and its still doesn't work. I replaced the return hose form the frame rail to the pump and still no power steering. I am only to believe that my rack is FUBAR'd I have even tried to bleed the powersteering pump a few times. Nothing. The fluid does not over boil and the pump does not make any nosie. So next I need to find the drain for the rack and drain it fully run compressed air through it and and make sure its not clogged. Then go from there. It doesn't leak and it seems to be cycling the fluid from out of the reservoir and back into it. It just does not work. I am going nuts about it. Any help would be appreciated. Any ideas what to look for. I did slightly bend one of my lines out of the way for the intercooler but its not kinked just moved slightly. Like 1cm. to the outside which means its straightened not pinched. __________________ UGR.....SOMETHING WICKED THIS WAY COMES....

11-09-2006, 11:43 AM	#6
CylonFrakker Zilvia Addict Join Date: Apr 2003 Location: Nashville TN Age: 42 Posts: 899 Trader Rating: (3) Feedback Score: 3 reviews	so do the 2JZ pumps. I had my pump tested and its good for 1000 psi! __________________ UGR.....SOMETHING WICKED THIS WAY COMES....

11-09-2006, 06:19 PM	#7
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	check again for plumbing route.. and iono try ur pump again.... __________________ S14 TrackSlut coming to a raceway near you... 510 TimeAttack on its way...

11-09-2006, 11:22 PM	#8
cmcdougle Zilvia FREAK! Join Date: May 2006 Location: Irvine, CA Posts: 1,361 Trader Rating: (0) Feedback Score: 0 reviews	Will it hurt it to run power steering fluid? They have similar consistancies. Check howstuffworks.com for a diagram, maybe something in that gearing is messed up. __________________

11-10-2006, 07:02 AM	#9
CylonFrakker Zilvia Addict Join Date: Apr 2003 Location: Nashville TN Age: 42 Posts: 899 Trader Rating: (3) Feedback Score: 3 reviews	i am going to pull the rack and replace the filters as well run new lines for high pressure and low pressure. I am also going to blow the lines clean and get everything out. __________________ UGR.....SOMETHING WICKED THIS WAY COMES....

11-09-2006, 08:58 AM	#2
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	The return from the rack should go to the resivoir. a line should go from the resivoir to the pump and then the high pressure hose should go from the pump to the rack.

11-09-2006, 09:46 AM	#4
ManoNegra Guild of Skullduggerous Intent Join Date: Jan 2004 Location: Socal Posts: 7,841 Trader Rating: (48) Feedback Score: 48 reviews	What fluid are you using? 240s take ATF instead of power steering fluid.