Z32 front brake swap on S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dream240 · 11-29-2006, 02:07 PM

MY TURN, MY TURN!!!

Dood, everyone is giving you a hard time because you have over 1700 posts, are asking a noob question, and should know how to use the search button by now.

I'm lazy too when it comes to search but I still go into the threads and look for the highlighted keywords to see if it's relevant.

C'mon man admit that you do deserve some flaming. I learned the answer to this question just by talking to a guy about his mods around 5 years ago.

oh and no matter how you drill em....the rotors will not line up perfect. I've got 4 attempts at drilling to attest for that. So good luck.

projectRDM · 11-29-2006, 04:05 PM

4 bad attempts it seems.

I've drilled three pair for customers on a press, using a 4lug rotor as a template, all of them lined up perfect. Sure your press isn't jacked?

240silvia · 11-29-2006, 09:07 PM

Quote:

Originally Posted by Dream240

MY TURN, MY TURN!!!

Dood, everyone is giving you a hard time because you have over 1700 posts, are asking a noob question, and should know how to use the search button by now.

I'm lazy too when it comes to search but I still go into the threads and look for the highlighted keywords to see if it's relevant.

C'mon man admit that you do deserve some flaming. I learned the answer to this question just by talking to a guy about his mods around 5 years ago.

oh and no matter how you drill em....the rotors will not line up perfect. I've got 4 attempts at drilling to attest for that. So good luck.

Dude have you read all of my posts in here? I've addressed your comments 5 times already. Just go back and read them, I'm not going to type them again, oh, guess it's b/c I'm lazy, lol.

Dream240 · 11-30-2006, 09:35 AM

Quote:

Originally Posted by 240silvia

Dude have you read all of my posts in here? I've addressed your comments 5 times already. Just go back and read them, I'm not going to type them again, oh, guess it's b/c I'm lazy, lol.

um....yeah i did. That's why I was replying. And my post wasn't meant for a response. It was merely my attempt at fitting in.

ME = fail

11-29-2006, 02:07 PM	#1
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	MY TURN, MY TURN!!! Dood, everyone is giving you a hard time because you have over 1700 posts, are asking a noob question, and should know how to use the search button by now. I'm lazy too when it comes to search but I still go into the threads and look for the highlighted keywords to see if it's relevant. C'mon man admit that you do deserve some flaming. I learned the answer to this question just by talking to a guy about his mods around 5 years ago. oh and no matter how you drill em....the rotors will not line up perfect. I've got 4 attempts at drilling to attest for that. So good luck. __________________ Don't mess with my monkey...he's loaded.

11-29-2006, 04:05 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	4 bad attempts it seems. I've drilled three pair for customers on a press, using a 4lug rotor as a template, all of them lined up perfect. Sure your press isn't jacked?