B&M shortshifter question. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BC240 · 12-06-2006, 06:50 PM

Ok heres a few pics, The first one you see is after you take the top panel off, this is the second boot (the first being the leather wrapping attached to the bezel). Make sure this is undamaged and take it off:

This picture shows the second boot, make sure its undamaged and take it off:

Another better shot showing the damage:

If yours is damaged take it off and replaced it with the new one by sliding it on and zap strapping it tight. here is the finished product

After I did this I had no smoke and no smell, and both were very noticable beforehand. I have more pictures but its fairly simple. If someone wants me to do a better writeup I will. Oh and FYI I took those :ghey: mats out, they came with the car to protect the original 240sx ones but were to ugly to look at.

12-06-2006, 06:50 PM	#1
BC240 Zilvia Junkie Join Date: Aug 2006 Location: Richmond, BC Age: 43 Posts: 472 Trader Rating: (1) Feedback Score: 1 reviews	Ok heres a few pics, The first one you see is after you take the top panel off, this is the second boot (the first being the leather wrapping attached to the bezel). Make sure this is undamaged and take it off: This picture shows the second boot, make sure its undamaged and take it off: Another better shot showing the damage: If yours is damaged take it off and replaced it with the new one by sliding it on and zap strapping it tight. here is the finished product After I did this I had no smoke and no smell, and both were very noticable beforehand. I have more pictures but its fairly simple. If someone wants me to do a better writeup I will. Oh and FYI I took those :ghey: mats out, they came with the car to protect the original 240sx ones but were to ugly to look at.