FN01R-C's on S13 17x8 +35 or 17x9 +20? Z32? Camber? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kriptix · 01-07-2007, 11:56 PM

I have searched and have found only limited info. Anyone running 17x8 +35 FN01R-C's on an S13? 17x9 +20? 17x8 +25? Anyone know if they clear z32 brakes? I know with the 17x9 +20 you have to roll/pull and run more camber, but how much more. I want to get some but want to make sure I don't have to run -3 camber and spacers to clear stuff. The wheels I have now are 16x8 +10 I think, and I have to go -3 camber to clear the fenders. Looking for pics if possible.

chmercer · 01-08-2007, 12:10 AM

it clears

and 9+20 yes

it needs like a weak roll

no pull

no crazy camber, maybe like, 2? ish?

irax · 01-08-2007, 12:12 AM

slam it down, roll the fenders, and don't fix the camber..

Gumballf355 · 01-08-2007, 12:13 AM

Rota Grids huh?? What size tire?

beetlejuice · 01-08-2007, 12:25 AM

Brake caliper clearance is based solely on spoke design, and has nothing to do with offset.

Tire size (specifically width) will also determine how much fender modification will be needed for the 17x9 +20.

17x9 +20 will protrude about 2.7mm further outboard than your 16x8 +10.

kriptix · 01-08-2007, 01:00 AM

Quote:

Originally Posted by Gumballf355

Rota Grids huh?? What size tire?

Yes...

225/50/16
Falken FK452's

With it low I have to run -3 camber front and rear. My fenders are rolled and pulled in front and just rolled in back.

kriptix · 01-08-2007, 01:02 AM

Quote:

Originally Posted by chmercer

it clears

and 9+20 yes

it needs like a weak roll

no pull

no crazy camber, maybe like, 2? ish?

So the 17x8 +35's are a good choice?

KA-T_240 · 01-08-2007, 02:43 AM

so, how wide of tire can you fit on them 17x9 +20? on stock body, with out major pull/roll and making it look like your body met a steel tire, LOL.

irax · 01-08-2007, 11:29 AM

Quote:

Originally Posted by mach5camaross

so, how wide of tire can you fit on them 17x9 +20? on stock body, with out major pull/roll and making it look like your body met a steel tire, LOL.

it depends on how lo you can go, im almost tucking rim with unfixed camber and the widest tire i can barely fit is like a 225/40/17 but 215/40/17 fits nice and flush, but this is 17x9:0 on a s14 so its about the same on a s13..

chmercer · 01-08-2007, 11:48 AM

Quote:

Originally Posted by kriptix

So the 17x8 +35's are a good choice?

no that shit sucks

17x9 +20 is better get that

kriptix · 01-08-2007, 12:52 PM

Quote:

Originally Posted by chmercer

no that shit sucks

17x9 +20 is better get that

Why does it suck?

I don't really want to run 17x9... that shit is too wide... and I'm worried about rubbing on the inside. I just want to make sure I can run the 17x8 +35's and clear z32 calipers/coilovers and not have to run super camber.

1 88 U · 01-08-2007, 03:13 PM

Quote:

Originally Posted by kriptix

Why does it suck?

I don't really want to run 17x9... that shit is too wide... and I'm worried about rubbing on the inside. I just want to make sure I can run the 17x8 +35's and clear z32 calipers/coilovers and not have to run super camber.

17x8+35 won't clear Tein HE without spacers, 9 +20 rears are fine.

mjjstang · 01-08-2007, 03:47 PM

I think mine are 17x8 +35 all around. I forget though, that is sad

KA-T_240 · 01-08-2007, 03:50 PM

Quote:

Originally Posted by irax

it depends on how lo you can go, im almost tucking rim with unfixed camber and the widest tire i can barely fit is like a 225/40/17 but 215/40/17 fits nice and flush, but this is 17x9:0 on a s14 so its about the same on a s13..

Im not going to slam it. It'll probably go 2 inches lower then stock. I want
255s on the back. I have 225s on the stock rims and have major traction issues.

KA-T_240 · 01-08-2007, 03:53 PM

Quote:

Originally Posted by mjjstang

I think mine are 17x8 +35 all around. I forget though, that is sad

more pics? and info(tire sizing)

brewster240 · 01-08-2007, 04:07 PM

Quote:

Originally Posted by 1 88 U

17x8+35 won't clear Tein HE without spacers, 9 +20 rears are fine.

yes they do. it took my 17x8 +35 fno1rs off of a car with them.

they are now on my s13 with silkroads and fit fine with no spacers, and clear z brakes. i have 17x9+35 rear with no roll or pull, and a slight roll in the front.

kriptix · 01-08-2007, 04:38 PM

Thank you for you help everyone.

McRussellPants · 01-08-2007, 06:29 PM

lol 17x9 is KRAAAAAAAAAAAAAAAAZZZZZZZZZZZZZYYYYYYYYYYYYYYYYY

yokotas13 · 01-08-2007, 08:23 PM

lol with a K

1 88 U · 01-09-2007, 01:05 PM

Quote:

Originally Posted by brewster240

yes they do. it took my 17x8 +35 fno1rs off of a car with them.

they are now on my s13 with silkroads and fit fine with no spacers, and clear z brakes. i have 17x9+35 rear with no roll or pull, and a slight roll in the front.

what size tires? I run 215/40 with 5mm spacers because I was getting some rub.

brewster240 · 01-09-2007, 05:33 PM

225/35 front 235's rear? i dont exactly remember. ill check tommorow if i remember.

01-07-2007, 11:56 PM	#1
kriptix Leaky Injector Join Date: Nov 2004 Location: Bay Area, CA Posts: 100 Trader Rating: (4) Feedback Score: 4 reviews	FN01R-C's on S13 17x8 +35 or 17x9 +20? Z32? Camber? I have searched and have found only limited info. Anyone running 17x8 +35 FN01R-C's on an S13? 17x9 +20? 17x8 +25? Anyone know if they clear z32 brakes? I know with the 17x9 +20 you have to roll/pull and run more camber, but how much more. I want to get some but want to make sure I don't have to run -3 camber and spacers to clear stuff. The wheels I have now are 16x8 +10 I think, and I have to go -3 camber to clear the fenders. Looking for pics if possible. __________________

01-08-2007, 12:12 AM	#3
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 41 Posts: 4,249 Trader Rating: (4) Feedback Score: 4 reviews	slam it down, roll the fenders, and don't fix the camber.. __________________ Drives a BRZ and is building a V6 S12 coupe.

01-08-2007, 12:25 AM	#5
beetlejuice Leaky Injector Join Date: Jun 2005 Location: Me? Posts: 145 Trader Rating: (0) Feedback Score: 0 reviews	Brake caliper clearance is based solely on spoke design, and has nothing to do with offset. Tire size (specifically width) will also determine how much fender modification will be needed for the 17x9 +20. 17x9 +20 will protrude about 2.7mm further outboard than your 16x8 +10. __________________ jollydwarf.com

01-08-2007, 02:43 AM	#8
KA-T_240 Nissanaholic! Join Date: Sep 2005 Location: Moorhead, MN Age: 38 Posts: 1,788 Trader Rating: (0) Feedback Score: 0 reviews	so, how wide of tire can you fit on them 17x9 +20? on stock body, with out major pull/roll and making it look like your body met a steel tire, LOL. __________________

01-08-2007, 03:47 PM	#13
mjjstang Post Whore! Join Date: Apr 2003 Location: Michigan Posts: 2,654 Trader Rating: (5) Feedback Score: 5 reviews	I think mine are 17x8 +35 all around. I forget though, that is sad __________________ I was going to, but I can not think of a sig less than 75 characters.

01-08-2007, 12:10 AM	#2
chmercer BANNED Join Date: Jun 2003 Location: texas! Age: 39 Posts: 3,288 Trader Rating: (0) Feedback Score: 0 reviews	it clears and 9+20 yes it needs like a weak roll no pull no crazy camber, maybe like, 2? ish?

01-08-2007, 12:13 AM	#4
Gumballf355 Zilvia Addict Join Date: Oct 2005 Location: San Jose, CA Age: 45 Posts: 605 Trader Rating: (1) Feedback Score: 1 reviews	Rota Grids huh?? What size tire?

01-08-2007, 04:38 PM	#17
kriptix Leaky Injector Join Date: Nov 2004 Location: Bay Area, CA Posts: 100 Trader Rating: (4) Feedback Score: 4 reviews	Thank you for you help everyone. __________________

01-08-2007, 06:29 PM	#18
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	lol 17x9 is KRAAAAAAAAAAAAAAAAZZZZZZZZZZZZZYYYYYYYYYYYYYYYYY

01-08-2007, 08:23 PM	#19
yokotas13 Post Whore! Join Date: Apr 2006 Location: Milford, CT Age: 40 Posts: 10,519 Trader Rating: (8) Rides Gallery: yokotas13 Feedback Score: 8 reviews	lol with a K __________________ 2015 Subaru Outback Overlander - Wagonofdoom

01-09-2007, 05:33 PM	#21
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 42 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	225/35 front 235's rear? i dont exactly remember. ill check tommorow if i remember.