Problem with sr20 swap, serch not really helping

[bik]

ok guys i been working on the car all day O_o somebody please still can help me Y_Y

I check the ignition chip with the FSM and is fine, i check continuity on the harness and is ok too... i check the CAS and looks align fine to me check the pics

Crank pulley is in the 2nd mark on the left





Also check the CAS with the FSM and is ok too

i still get spark only on the cylinder 1.... i get fuel on all cylinder, i took out the spark plugs and are moisty with fuel, I also put a couple or more grounds from engine to chassis, i have check all the stuff about ignition on FSM and test it all and all seems fine

check the video where try to fire up...



also seems than is waaaay to hard to start it up... dont say i have to recharge batery cause i am using jumper cables!!!!

anyone can help me??? u guys think is the ECU messed up? there is a way to check up the ecu, I live far more more SR20 ecus =/

sorry my english sucks =/