DIY: Resetting Factory Remote - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mathetai · 02-12-2007, 05:43 PM

This I know to work for S14's, but may also work for other Nissans. This is for all the peeps who cant seem to get their keyless entry to work anymore and who have replaced their battery in the remote.

1. Be sure that you have a new battery in your remote.
2. Get inside the car and lock your doors.
3. Insert the key into the ignition (in & out) for at least 3 times or until the hazard lights flash.
4. After the lights flash, turn the key to the "on" position and press the lock button on the remote.
5. The lights will flash again and the door locks will set.
6. Remove the key and get out of the car. Try locking it up with the remote.

If this didnt work, you have problems. Have fun!

02-12-2007, 05:43 PM	#1
Mathetai BANNED Join Date: Oct 2006 Location: SOCAL <///>< Age: 43 Posts: 1,193 Trader Rating: (6) Feedback Score: 6 reviews	DIY: Resetting Factory Remote This I know to work for S14's, but may also work for other Nissans. This is for all the peeps who cant seem to get their keyless entry to work anymore and who have replaced their battery in the remote. 1. Be sure that you have a new battery in your remote. 2. Get inside the car and lock your doors. 3. Insert the key into the ignition (in & out) for at least 3 times or until the hazard lights flash. 4. After the lights flash, turn the key to the "on" position and press the lock button on the remote. 5. The lights will flash again and the door locks will set. 6. Remove the key and get out of the car. Try locking it up with the remote. If this didnt work, you have problems. Have fun!