Clutch line question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

S13 Charlie · 02-14-2007, 05:03 PM

Are you talking about the rubber line going from the hard clutch line to the slave cylinder? If so, you should ditch that anyway for a braided stainless line from SPL-Parts, or similar. They're only about 20 bucks, completely interchangeable and pretty easy to install. Also, the slave cylinders are interchangeable between KA and SR, if you want to go that route.

hope that helps,

Charlie

Landers · 02-14-2007, 05:05 PM

Thanks for the help guys im gonna go with the steel braided...i appreciate the help and the quick responses!

02-14-2007, 05:03 PM	#1
S13 Charlie Zilvia Addict Join Date: Oct 2004 Location: San Diego Posts: 716 Trader Rating: (3) Feedback Score: 3 reviews	Are you talking about the rubber line going from the hard clutch line to the slave cylinder? If so, you should ditch that anyway for a braided stainless line from SPL-Parts, or similar. They're only about 20 bucks, completely interchangeable and pretty easy to install. Also, the slave cylinders are interchangeable between KA and SR, if you want to go that route. hope that helps, Charlie

02-14-2007, 05:05 PM	#2
Landers Zilvia Junkie Join Date: Jan 2007 Location: W Mass. Age: 37 Posts: 561 Trader Rating: (3) Rides Gallery: Landers Feedback Score: 3 reviews	Thanks for the help guys im gonna go with the steel braided...i appreciate the help and the quick responses!