Clutch line question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Landers · 02-14-2007, 04:51 PM

Quick question guys....i pulled my motor (sr20det in an s13 coupe) today and come to find out that my hydralic clutch line is all torn up

. Now my question is can i replace it with a stock KA one or am i going to have to locate an SR line? I did not do the swap so i dont know if you keep the slave cylinder between the two motors and just hook it into the SR tranny. Thanks for the help guys you are the best!

***S14DB*** · 02-14-2007, 05:00 PM

They are the same.

S13 Charlie · 02-14-2007, 05:03 PM

Are you talking about the rubber line going from the hard clutch line to the slave cylinder? If so, you should ditch that anyway for a braided stainless line from SPL-Parts, or similar. They're only about 20 bucks, completely interchangeable and pretty easy to install. Also, the slave cylinders are interchangeable between KA and SR, if you want to go that route.

hope that helps,

Charlie

Landers · 02-14-2007, 05:05 PM

Thanks for the help guys im gonna go with the steel braided...i appreciate the help and the quick responses!

02-14-2007, 04:51 PM	#1
Landers Zilvia Junkie Join Date: Jan 2007 Location: W Mass. Age: 37 Posts: 561 Trader Rating: (3) Rides Gallery: Landers Feedback Score: 3 reviews	Clutch line question Quick question guys....i pulled my motor (sr20det in an s13 coupe) today and come to find out that my hydralic clutch line is all torn up . Now my question is can i replace it with a stock KA one or am i going to have to locate an SR line? I did not do the swap so i dont know if you keep the slave cylinder between the two motors and just hook it into the SR tranny. Thanks for the help guys you are the best!

02-14-2007, 05:00 PM	#2
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	They are the same. __________________ Comments should be taken as Opinions not as Statements of Fact

02-14-2007, 05:03 PM	#3
S13 Charlie Zilvia Addict Join Date: Oct 2004 Location: San Diego Posts: 716 Trader Rating: (3) Feedback Score: 3 reviews	Are you talking about the rubber line going from the hard clutch line to the slave cylinder? If so, you should ditch that anyway for a braided stainless line from SPL-Parts, or similar. They're only about 20 bucks, completely interchangeable and pretty easy to install. Also, the slave cylinders are interchangeable between KA and SR, if you want to go that route. hope that helps, Charlie

02-14-2007, 05:05 PM	#4
Landers Zilvia Junkie Join Date: Jan 2007 Location: W Mass. Age: 37 Posts: 561 Trader Rating: (3) Rides Gallery: Landers Feedback Score: 3 reviews	Thanks for the help guys im gonna go with the steel braided...i appreciate the help and the quick responses!