Crankshaft pulley removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chrischeezer · 03-22-2007, 09:02 PM

just get a Huge pully remover...
tap it with a hammer a lill.. and pull

i once used a smaller puller and it broke 2 parts of the crank.. but the second try it came right off..

projectRDM · 03-22-2007, 09:32 PM

Thread the OE bolt back in a few turns, then use the puller. You need something to press against so it can pull straight out. Any 6" or larger 3,4 jaw puller will work fine.

03-22-2007, 09:02 PM	#1
Chrischeezer Zilvia FREAK! Join Date: Jul 2005 Location: earth Age: 41 Posts: 1,406 Trader Rating: (2) Feedback Score: 2 reviews	just get a Huge pully remover... tap it with a hammer a lill.. and pull i once used a smaller puller and it broke 2 parts of the crank.. but the second try it came right off.. __________________

03-22-2007, 09:32 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Thread the OE bolt back in a few turns, then use the puller. You need something to press against so it can pull straight out. Any 6" or larger 3,4 jaw puller will work fine.